CHRISXTR3M3

Because what the previous poster explained, and also, there is no way to assign the TDC slew axis at the moment, this will take care of two birds, one stone... Even Warthog HOTAS owners can't bind slew axis at the moment.

another thing to consider is your in-game and Nvidia Control Panel settings I tweak most of my settings in the Nvidia control panel and have them override DCS settings. I get avg. 90FPS

Barracuda's system, pound for pound, without comparing GPUs between yours and his definitely blasts your system, and even mine out of the water. I run i74790K @4.0Ghz G.Skill Trident 2100Mhz x2 8GB = 16GB and EVO 850s x4 (2 of them in RAID0) The only component I have better than his is the GPU...I have STRIX 1080 this goes to show how CPU and RAM dependent DCS still is

The combination of that CPU at that ClockSpeed along with the RAM clockspeed and on top of that you have liquid cooling and are running an SSD. Yea, that is a beast machine putting up the work for you. The GPU is simply gliding along when it comes to load work thanks to your other components

Are you sure the target point you are talking about (the switching issue) is the actual CCIP crosshair and not CCIP line make a "Cross" at the lowest part of the HUD even thought the reticle is actually being calculated well below the lowest part of the HUD? It is explained in this post: https://forums.eagle.ru/showpost.php?p=3380639&postcount=1

https://forums.eagle.ru/showpost.php?p=3508368&postcount=5 Lol I literally just posted that in another thread.....I guess I could make one when I get home tonight...Gonna have to dig out my x55 stick though since I use a combination of x55 throttle and Warthog Stick. But if you promise to put it to good use, I guess I can make one

DUDE check my userfiles in the SIG. You will love me long time **EDIT: here for easy access https://www.digitalcombatsimulator.com/en/files/3288785/ And I am VS-33 Doc, so these are my files, not someone elses P.S. this allows you to use mouse nipple on x55 throttle as tdc axis instead of using up one of your hat switches. I might just do a full out F-18C profile for all with picture references to bound controls and placement...I'll think about that one

I'm more curious to see what his CPU specs and RAM and HDD/SSD specs are.

What you do to get videos embedded here is the following..I will use your link as an example...in the example I will leave spaces between brackets so as to not enable the embed and you can see the process...I will highlight in red the only part of the link you need from any youtube video to embed it. Me7L9dll8m8 Also make sure you deactivate the hyperlink from the link extract from above by hitting the "remove link" button above text window. "RED TEXT HERE without quotes" <---put a forward slash in front of the "youtube" in the closing brackets Me7L9dll8m8

I experienced the same. You're talking about the bypass switch correct? The current way the keybinding for that seems to be working is as a "button press/depress" rather than a "switch". If you have a two position switch that doesn't revert to center and holds that "button press" input then that would be a better HOTAS binding option for now until we get revised keybindings. I hope this is what is going on and solves your issues. I had the same issue so from now on I just use the mouse to set bypass switch.

actually..... Harrier and M2k had it first

I did notice similar behavior....but I did notice I was able to make slight adjustments with trim...just doesn't seem to be as effective per input compared to other modules if that makes any sense.

Thanks for the clarification 9L

hmm.....time to look at the .lua code...

I believe the issue lies within the stores page...when the load out is changed to a different configuration the stores page doesn't update

How is it broken?

It's called camera shake in the options menu guys

What did your mother and I tell you about posting pictures of your food on the internet. Your instagram is deleted young man! Now go to your room!

Guess there's no reload DSMS option...part of the WIP

Can we keep it PG please? lOl

My previous TDC axis profile for x55 throttle mouse nipple will work on F/A-18C https://www.digitalcombatsimulator.com/en/files/3288785/ I will try to get something working for you A-10C HOTAS and T1600 HOTAS users. Just a bit hard to program the software without the hardware so I am not making any promises, other than that I will attempt to create profiles for you guys using the respective software for profile creation for each Device

Thank you for checking that for me. So for x55 users, the profile I have set up for x55 mouse nipple TDC axis in my user files section linked below in my Sig will work for F-18C. For you Warthog HOTAS users, I will download the Thrustmaster TARGET software as soon as I get home from work and attempt to create you guys a profile from scratch, no promises though as I do not have the Thrustmaster Throttle. Link to my userfiles https://www.digitalcombatsimulator.com/en/files/?CREATED_BY=itsavendetta&set_filter=Y&PAGEN_1=3

Yea...it can be frustrating...I'm trying my part to at least help out those I can, with hardware configurations similar to mine...If I had the Thrustmaster A-10C Throttle Im sure I'd have a profiler ready for that as well... any clue what keyboard keys the TDC slewing is defaulted to for the Hornet?

What are the keyboard bindings for the TDC slew?

I will be making one for the Hornet drivers out there with the X55 throttle mouse nipple.