Legolasindar

With the zip file is included layout in JPG explaining all functions. For up/down gears only need push+hold S3 and push T9. Thanks for use my profile.

By default 5 is for the Range axis of the Throttle. ¿You after set you setup, clicked to Apply button? If you not apply not work. Other method is setup this axis swap by the profile of sim. USE SWAP (MIY, RNG) USE SWAP (MIX, RDDR) Axis_Identifier is one of the following: JOYX, JOYY (together termed JOYSTICK) THR RNG, ANT (together termed ROTARIES) MIX, MIY (together termed MICROSTICK) LBRK, RBRK (together termed TOEBRAKES) RDDR In the past i remember try this swap function directly in the CCP and in the profile, but i think remember not work well.

Esto es muy cierto, la paciencia es una virtud. Aunque yo entiendo al compañero, despues de los retrasos de localizacion sufridos anteriormente es normal que la gente este muy sensible con estas cosas. Mientras que la salida del parche en Castellano no se retrase mucho pues no pasa nada.

UPDATED VERSION 1.1 I updated profile with the new version. This only fixed announced bugs of the second post. New links are in the first post. I think have one more bug, but i cant found, i think one key remain holded sometimes, but i cant found, if any look this bug, please report me.

http://forums.eagle.ru/showpost.php?p=881354&postcount=11 http://forums.eagle.ru/showpost.php?p=881434&postcount=13

Another Viper here :smilewink: Hotas Cougar no modded Pedals - CH Pro Pedals DCS Settings Pitch and Roll: Deadzone - 0 Saturation X - 100 Saturation Y - 70 Curvature - 24 Rudders: Deadzone - 0 Saturation X - 100 Saturation Y - 100 Curvature - 25 Inverted CCP Settings in Default.

Re-check ALL controls in the Controls menu, keys and axis, surely you may have assigned the mouse also to the axes of the views or the trackIR. To use my profile you MUST completely remove the mouse from the views and the trackIR. And when you activate the profile in the CCP, with the big red button, Be sure that you check the option below, User Mode.

Por mi no hay problema, se que una persona sola no puede representar un gran escuadron, y no hace falta que os disculpeis, la responsabilidad es exclusivamente de el, vosotros no teneis culpa de nada. Yo en su momento ya reporte el post ofensivo del otro tema a los moderadores, y me comentaron que ya le dieron el aviso a este usuario. Un saludo y buena vuelo.

Mouse of 90€ or mouse of 10€ is the same for air simulators. The 99% of the times you only use mouse in the simulators for the menus. And in cases of Falcon, BS and others where you have interactive cockpit, not need extra precision, extra buttons, or extra nothing.

Primer mensaje 04-26-2010, 06:49 AM UFFFF, bueno de a uno gente, no se amontonen, tantas ayudas y no se cual elegir.... 04-26-2010, 08:05 PM Ni 24 horas has dejado pasar, y ya te has quejado que nadie te ha respondido. La gente no esta las 24h pegada al foro para ver si alguien pregunta una duda, la gente tiene, trabajo, amigos, pareja, etc... si no te responden te esperas y no posteas con esas exigencias. Ademas habra gente que haya leido tu post pero que no tenga ni idea de como ayudarte. Asi que se mas paciente y respetuoso con los demas.

Direct access of desktop use this sintaxys. Singleplayer - "E:\Juegos\Eagle Dynamics\LockOn Flaming Cliffs 2\bin\x86\stable\Launcher.exe" --console Multiplayer - "E:\Juegos\Eagle Dynamics\LockOn Flaming Cliffs 2\bin\x86\stable\simulator.exe" --net gui

You added modifier /H to the syntaxis? BTN S2 /I /O /H Weapon_Release Need /H for can hold button in the cougar.

Foxy is program for create profiles, not for launch sims, although it may be. Please use Hotas Cougar Control Panel (CCP) for admin and active profiles. The CCP is create for setup Cougar, load profiles, and admin in general Cougar. Steeps for active the profile.. 1- Click in the Icon of the Desktop HOTAS Cougar Control Panel, also called CCP. 2- Click in the boton Download to Devide... 3- Click in Download. 4- Select the profile and click in Open. 5- Appear a window showing status of the download of the profile to the Cougar must appear OK. Return to the main window. 6- Click in the Red button, so that it becomes Green, then the profile to be active. You can fly. When you are done flying, you must return to press the Green button, that turns Red, to deactivate profile. Note that this profile is already loaded on the Cougar, so you not need download it again, if for example you reboot your computer, simply open the CCP, and press the Red button to put an green, this activates the profile. To load another profile, you must complete all the steps again. Thanks for use my profile and sorry for my bad english.

Not a decent HOTAS, nor TrackIR, sure do not have pedals on the floor, these Americans are a few sloppy :smilewink::joystick:. In addition to the HOTAS on the table has to be a cumbersome to use, and just to see the picture I'm getting pain in the arms.

First TD Slew not work correctly with MS (microstick) in the FC2, is a bug. You need assign mouselook to TD Slew, and assign mouse movement to microstick in the cougar, i think you are using my profile, only need first steep. And in the FC2 controlls you have one button named "Axis Tune" for modifiy axis response.

You need enable the profile in the Cougar Control Panel (CCP), open CCP, load profile, and click in the big red button, when appear green is working.

You pay for new product, and no buy the most modern version? Only have 30€ of difference between TIR4 and TIR5. Ohter example, you no have now HOTAS, you buy X45 or X52? X52 of course, most better say X52 Pro.

Resolution is not the only improvement. You can view differents improvements, for example one of this is the importan Angle of View. Resolution and other imagen improved features gift more smouth and precision movementes. Red is improved TrackIR 4:PRO Raw Sensor Resolution: 355x288 (sub-sampled at 710x288) Reporting Resolution: 1/20th pixel Sub-Pixel Reporting Resolutio: 7,100 x 5,760 Resolution/Horizontal Field of View Degree: 154 subpixels/degree Angle: 46 TrackIR 5 Raw Sensor Resolution: 640x480 Reporting Resolution: 1/150th pixel Sub-Pixel Reporting Resolutio: 96,000 x 72,000 Resolution/Horizontal Field of View Degree: 1850 subpixels/degree Angle: 51.7

Camera || Sensor Resolution || Sub-Pixel Reporting Resolution || Sensor || FPS || Angle (º) || CPU Usage || In-device Pre-processing || Degrees of Freedom NaturalPoint TrackIR 2 || 60k pixels (eg 300x200) || No || monochrome || 100 33 || small || yes || 2DOF NaturalPoint TrackIR 5 || 640 x480 || 96000 x 72000 || monochrome || 120 || 51.7 || small || yes || 6DOF Video comparision between TrackIR 4 vs 5, imagine in 2 vs 5: http://www.naturalpoint.com/trackir/products/trackir5/comparison/?KeepThis=true&TB_iframe=true&width=810&height=324&modal=true I recommend you buy TrackIR 5, not 4, TrackIR5 have important features improved.

I not understand well you question, because my english is very bad. But look this profile with custom trim for the Cougar if help you. http://forums.eagle.ru/showthread.php?t=33583

I not understand this poll

For know desired axis, click in assign, and move you axis all the way, FC2 and DCS:BS have autorecognition axis.

Thank you all for your compliments. For the DCS:A-10C also create a profile.

I have Slew control assigned to Mouse, and control in Cougar with Microstick. You have same or use key pulsation? Pues eso, que yo lo tengo asignado el Slew al mouse y lo controlo con el microstick del Cougar. No lo he comprobado, pero creo que con teclas funciona bien pero con eje no al maximo de zoom.

I don't know if this is a bug. With Shkval and TV of Maverick, if you fly leveled, TV Slew move well, but if you for example stay rolled 30 degrees, slew of TV not move well. Slew every move with the real horizon, not with TV horizontal. The natural human think is move right in the TV, not in the horizon, and this will be compensated by computer onboard. I think is rare movement is in FC because you can wath Shkval or TD Box (circle) in the HUD, but ever look Shkval when have this. The move by default can be realistic feature, but i down know. I created two pictures for explain this. And this is a BUG When i set maximum zoom, Axis move wrong, Y axis is inverted.