rglmsgt

Your all right BUT can someone tell me exactly how to update, step by step, because mine ran But still have 2.9.1.48335 ??

OK, my latest DCS World update is 291.48335 does that contain the New Syria Map by Ugra Media. I could not tell if we already have the update or if it is coming I have the Syria Map is it automatically updated with the next DCS update Any help in interrupting the March 1 letter would be appreciated

thanks will work on it

My X-56 Joystick just went out! This is what happens: I move the joystick and the jet will not pitch or roll until I move the Joystick half the distance. in other words I cannot move the jet with the usual short movements. This happened all of a sudden, in order to pitch down or up I have to move the joystick half the distance of the joystick and it is very sluggish, slow, same with roll and no adjustments of the axis tune help. This is very hard to explain. Can someone please advise. Before I pushed joystick for pitch down I could move jet with short movement now it takes long and sluggish movement just to move the aircraft, and not adjustments of the axis helps

THANKS

i THANK YOU 110% WORKS BACK TO PERFEFT ON F16 ALSO PERFECT, ONE LAST QUESTION WOULD YOU ADJUST THE CURVATURE IF AUTOPILOT PERFECT HOLD?

TRIMMED AUTOPILOT WILL NOT HOLD POSITION, SHORTLY BEFORE WAS PERFECT, NOW IT WILL SLOWLY CLIMB OR DIVE IN EITHER ATTH OR BALT Left MDI has on it ADV: Bit BALT AND ATTH when clicked on on either Any know about this or have trouble with this system now and not before>

I don't usually make a comment in the time I have been with DCS, but I will never understand why we should loose all our combat hours when we are trying to learn a new aircraft and have an accident with another aircraft on the ground.

Ok, I have an X56, the Joystick all of a sudden went out, that is the yaw and roll have lots of play, aircraft, helicopter uncontrollably up, down, roll tried to adjust does no good. Joystick takes large movements, no longer is tight pitch control or roll. Very difficult to explain. Can anyone assist

Have been using the X56, the only one I have ever used, for sometime now, flying different Helicopters, fixed wing. All of a sudden Joystick became sloppy, that is, in order to get a reaction from the aircraft I have to move the stick quite a distance for pitch and roll etc. It is no longer controlable. I was doing fine, then sloppy, can't even lock-on during a BFM. Jet all over the sky Anyway, anyone know why this could have happen, (long movements of the stick). Its difficult to explain, its just that the joystick is no longer short tight movements to control the Jet. Does anyone have a suggestion for a good throttle Joystick combo. or a FIX for the X56, thanks

Fantastic!! I was a Crew Chief of this Hun for 4 years, 1963-1967 Great Heavy old Bird. Loved it. I'll try to be the first to purchase, hope it will be here sooner than a year

For the life of me I cannot get this right, here goes: On MISSION, FA18, "combat mission-patriot Exp, load is 4x AGM-154a, 2 different targets, JSOW I think I programed first target right, but what is confusing me is do I need to program each station, 3,7,2,8 separately OR ON PP do I program STA 3-7 using only STA 3 and then STA 7 will fire automatically for first target and STA 2 for second target all for PP mode. JSOW. In other words, how do I program IN PP Mode, for kill off two targets.

RIGHT, MAYBE BY FEBRUARY 22, WE WILL SEE, HOPE SO ANYWAY

Think we will get the AH-64 APACHE SOON?

Normally when I purchased a module, aircraft, helicopter etc., I would get a receipt back from DCS. I just purchased the Mosquito, Pre-paid, but did not get any receipt from DCS, has something changed? Other then my Profile and Visa there is not a receipt from DCS. Can someone tell me if that has changed

Anyone know what is the Number one VR to use with DCS if I should decide to buy I thank you for the Informationl

OK, I thank you for the infor

I thank you for that answer, but I still think its alittle long, no big deal but I would like to know average time it takes people, thanks again

How long does it nomally take to open the "DCS World Open Beta" on your computer Before, a couple of months ago, when I clicked the ICON DCS World Open Beta, program opened in about 15 to 20 seconds no it takes 43 secounds, is that about right with all the changes or should it be less,

I'm not a pilot, but I do know this, since I have been in DSC my F/A 18 has been my main enjoyment, my F-16 is fun, but not enjoyable. To me you have to enjoy to fly, especially if your 75 years old and never flown or played video games, like me.. I have all of the jets and most of the recips I have flown all, not good, but am having a ball before to late ha ha. I have alot to learn, however, guys here in DCS will bend over backwards to help. I will say air to air is really hard but am working on it, weapon system great at least to me it is. Carrier landing fun, few crashes but interesting. Final, purchase DCS F/A-18 I believe you will not regret it.

I thank you for the message, however, I was in CMR and my FCR was SOI, white line around, still will not move. If you don't us TMR programing what do you use.

Can someone tell me if and how to be able to move the curser around to lock on targets? I have programed the Target Management Switch and Target Curser still will not move, flying, CMR or ACM Also my Dogfight switches will not stay put, in other words if I want Dogfight Missile Override Switch I have to hold down for all the time I need. Any help I can get will be appreciated.:helpsmilie:

SuperCarrier Multiple play only I just found out, Supercarrier is only for Multiple play?:mad::cry::mad::mad: However we can go in and make our own missions IF we know how. I'm going to try to make my own missions. Just an old Jet Mechanic trying to have fun. We will see

Can someone tell me if they have received the supercarrier as of 4/17/2020 I thought it was released today, between 11-12pm? I received alot of downloads but no SuperCarrier

I just bought the X56 and having lots of problems with the stick. I cannot trim for the plane, F-18 any suggestions. Flys all over the place.