oho

I want to use a Rotary as a permanent key press for VR zooming. I know how to set up zones in the profiler and assign a key to it. What I want is a permanent (or presses in very short Intervalls) press of a key simulated until I move the Rotary out of the Zone again. Is that possible? (I know it does this by Default in the X56 but not in the G940)

I mapped a X56 rotary zone to a key and when I test it in the Logitech Software I see the key press repeating constantly as if I keep pressing the key on the keyboard (Looks like eeeeeeeeeeeeeeeeeeee etc.). When I try to map it in DCS I go to the Keyboard column, select add and turn the Rotary into the zone but nothing happens. Is there another way to map the rotaries to Input comands in DCS?

Great mission anyway. Do these changes generate target waypoints too ? Because I fly in VR it is not so easy to write down and enter waypoints. Can I do it in the mission editor before starting the mission in 3D somehow, for the client I want to fly or are the coordinates generated while I'm in the cockpit on the runway?

I shortly started a mission with A10C and F18 but I didn't get any waypoints. Do have to add them in the mission editor or in flight (the latter would be a bit too much for me ;-)) or is it a bug?

3. Again as above :), you are free to add player slots and remove client slots as you like. Just keep in mind that AI slots should not be touched, those are part of the mission script and any modification to AI slots will generate problems. Great. How do I add Player Slots with F18 Stennis CAP-mission? I see this on the starting-screen and I was thinking, it was somehow programed by you.

Hi Leonardo, I'm starting to get into your missions and I liked it very much so far. Thanks a lot. I have some questions: 1. I'm only flying SP so I would like to add an AI wingmen to my hornet flight from stennis. The Problems are only with MP - right? Can I open your Mission with the Mission Editor and add the AI-plane? 2. Can I start hot from the catapult by editing it in the Mission Editor? 3. Could you make a Slot for CAP for F/A18 too? That would be great? Thanks!

I can only see that there is an orange or a red dot. Everything else is too blurry, even with holding VR zoom. I have a rift with 2.0 Pixeldensity.

I have a loadout of 4 MavF. I use a waypoint to slew the TGP on a target via SA page. I Designate the target with the TGP and the Mavericks are slewing to it I can lock on the Targets when in range and fire. I have no Problem doing that with maverick 1 and 2. With maverick 3 and 4 the mav is not slewing to the TGP Location but only near to it. Please check if you can reproduce it.

Since last week or so, the time acceleration is not working anymore. I maped a new key to the function but it's not accelerating. I'm playing Open-Beta. Did I miss something? Somebody had similar issues? Thanks for any hints.

Thanks very much for your answers. I tried it and I also had the left mouse-button mapped to a joystick button before. This also works for clicking the cockpit - buttons but not for the F1-F12 Comms-Menu. I only see a blue cross after clicking the mouse-button on the joystick but I don't get the white arrow. And hovering the blue cross over the Comms Menu doesn't change anything, I can't klick the Menu - Any idea?

For Radio Communication we Need 12 Buttons F1 - F12 on the Keyboard. Is there a trick, how I can access these Buttons in VR without using the Keyboard itself? My new HOTAS doesn't have as many Buttons left

I get a "check trim" message after cat-start and can't get rid of the message. In the FCS I see stabilators moving +1 / -1 without me using the trim button. Do you have a tip for easyly set trim to a neutral position again?

thanks!

what does H OFF mean in TOO - Mode above the target square? I seem to be able to hit this target, but what does it mean?

Are there any missions where I can use JDAM, JSOW or the SA-page. Perhaps if you have some, you can post them here?

I got it started (CVN Hornet caucasus), but the mission debriefing stops and I get error in missionscript global 'io' nil value. Can I fix it somehow.

I have the F/A-18C campaign over Caucasus (CVN-74 Stennis) and installed the navy mod (although I don't see any difference in the other missions I fly from CVN Stennis) in my Saved Games\DCS-Beta\Mods\tech Folder as described. I can start the first Mission but after a few seconds in the Cockpit on the deck I get a CTD. Do you have an idea? Maybe because I have a german version?

Thanks, will try that. Can I Change from sparrow to Aim120 in the stock campaign too?

Thanks. Actually I'm looking for a campaign without startup procedure but with AIM-120 and not too experienced AI-enemies.

I fly only SP without cold start, can taxi, take off and land on a CVN-vessel and did all the other tutorials, also AIM120. Which is an easy campaign that you can recomend for me?

When coming from RWS mode to ACM Mode and then going to vertical scan, I usually have the vertical radar beam not centered but on the right side, sometimes also a little less off the center. When I enter ACM directly (for example when I select AIM-9) it is centered. Is there a button / wheel on my logitech 940 not centered or is it a known bug? SOLVED: an axis was assigned wrongly so there was a permanent input

I almost always get the vertical scan on the left side and not centered when being in ACM-mode pressing aft. The boresight modes wide and narrow work fine. What do I do wrong. How is the vertical mode shifted, maybe a button / axis on my logitech 940 (throttle, pedal and stick) is set wrong but I don't find it? It happens when I was in BVR mode before or when I switch to RWS. When I start in ACM (when selecting Sidewinder at the start of a mission for example) I get it centered. Thanks

Thanks for sharing. I saw your labels.lua is only 3 KB and original is 8 KB, so: can I replace the original file or do I have to edit in the original file?

I have the same issue with the cockpit colors on the runway (external lights seem to be too strong) but when I take off, this is gone.

There is a new dynamic campaign available. https://forums.eagle.ru/showthread.php?t=214834 Does anyone have experience with it with the KA50. Some tips for good settings/customizing ?