DCS A-10C QUESTIONS

So I have to have this pressed while moving the mouse? Sorry I'm not on the PC right now so I can't test it.

Nope, the LAlt-C is a toggle. Press it once and moving your mouse will move the camera. Scrolling the wheel will zoom in or out. You can't however click anything. So you'd press LAlt-C again to interact with things. Possibly map the LAlt-C to an additional mouse button so you can do the move and toggle all with the mouse?

The what and what now?

Please... tell us more!

(No, seriously...)

PS, I went to the IFFCC and played around with some options like turning on the Tapes in the display, where it makes it look like an F15 HUD, pretty cool, then there was one option I cannot remember, that each time I would press the weapons release on a bomb or maverick, the hud would flash twice with weird writing for under a second, and then go back to normal. LOL, what the hell??

About the IFFCC and the metric setting. The flight manual says: METRIC. Select Y to display HUD data values in Metric. Select N to display in imperial values.

Exactly what data values on the HUD are displayed in metric? Only distances, or speed and altitude too?

Ok, thanks. For a while there, I was hoping this could be used to get away from the feets and knots and get some useful metric values on the HUD. Too bad.

Ok, thanks. For a while there, I was hoping this could be used to get away from the feets and knots and get some useful metric values on the HUD. Too bad.

lol me too :)

- IFF alert. IFF is still non functional in A-10C, but starting from 1.1.1.1 you will be able to hear IFF voice warning, if IFF alert has been set up. This is a reminder for the pilot to change IFF codes.

Does that mean that the IFF panel will be working in one of the upcoming patches?

I went to the IFFCC and played around with some options like turning on the Tapes in the display, where it makes it look like an F15 HUD, pretty cool

About speed tape. Why is it so that the bigger figures are on the bottom of the tape and smaller on top? I feel like it is upside down, somehow. I think I've seen pics of F-16 HUD, and the tape is just vice versa. More natural way.

I don't know. This how it works IRL.

Funny how the military does things. Looking forward to the next patch. Till then i have some new avionics to play with.

Is there any way to stop the aircraft from rolling by itself on ramp start?

It has been happening on multiple servers with many friends online in random areas and spots. It has nothing to do with our throttle... I know the A10 does not have a parking break, and IRL they put the slippers on the wheels, but I also heard a rumor that there is a parking break at the foot pedals somewhere, might not be true.

Usually when I engage the nose wheel steering on start up, it stops it from rolling, but that doesnt always work. I find myself in the field quite a lot.... Im pretty sure it's the wind but... Any plans on a work around for this?

Is there any way to stop the aircraft from rolling by itself on ramp start?

Just gotta hold the wheel brakes. I think there's been some discussion about this as it seems more of an issue in 1.1.1.0 than it has been before, but not sure if it's something they have any view on changing.

If you've got a controller with a switch that sends a continuous "button down" event then that can make do as a parking brake. I use a switch on a VRinsight panel for this. Exactly the same as just holding the toe brakes down, but without the strain. :)

Other than that I don't think there's anything you can do in MP. In SP you can hold 'w' to apply the brakes, pause it, release 'w', then unpause it - and the game will act as if you're still holding 'w' down. That obviously doesn't work in MP.

You might be able to use something like AutoHotKeys or your joystick profiling software to have it "hold down" the W key when you press a button.

Hello!

What is the touch for flares?

http://pic.beinig.be/upload/98/f-16-belge-flare.jpg

Thanks!

Good day!

What is the touch for flares?

If you mean what key/control it is to expend flares, then it's not quite that simple.

There's no command specifically to "expend flare" or "expend chaff" - you can set up the programs however you like and then the countermeasure system can be instructed to start the currently selected program with CMS FWD (and to stop it prematurely with CMS AFT). Program C expends lots of flares, typically what I use if I want to use them up real quick.

Hello!

I speak just of flares of fighter sweep to deflect missile. There isn't key/control for this flares?

Thanks!

Good evening!

Hello!

 

I speak just of flares of fighter sweep to deflect missile. There isn't key/control for this flares?

 

Thanks!

 

Good evening!

If you are with defaults:

Press key 0 (= zero, located about below F8 function key on your keyboard) 2 times to get a countermeasures prog with decent flares. Then press button 7 (below function keys again). Then if you press F2, you should see flares. (I suppose you have countermeasures active, not standby or off)

not targeting

for a while the a-10c would not sart from off to idle i was advised or rather was suggested i delete all folder DCS WARTHOG in order for the warthog to start.'c:/users/dave/savegames/dcswarthog, etc,now, having done that all was successfull and it worked perfecly and has fixed th issue,however having done that, another problem has arisen.no hotas targeting aquisision.all targets still appear red and visible but no 'wedding cake symbol'all settings via the mfcd's both work perfectly up to the this point.have tried deleting the entire dcs eagle dynamics folder with a clean install.i have the two patches 1.1.0.9 and 8 but nothing.any suggestions?:cry:

for a while the a-10c would not sart from off to idle i was advised or rather was suggested i delete all folder DCS WARTHOG in order for the warthog to start.'c:/users/dave/savegames/dcswarthog, etc,now, having done that all was successfull and it worked perfecly and has fixed th issue,however having done that, another problem has arisen.no hotas targeting aquisision.all targets still appear red and visible but no 'wedding cake symbol'all settings via the mfcd's both work perfectly up to the this point.have tried deleting the entire dcs eagle dynamics folder with a clean install.i have the two patches 1.1.0.9 and 8 but nothing.any suggestions?:cry:

Ensure you select the 'SIMULATION' tab in the SP GUI/Options/Gameplay screen, alternatively at least the 'GAME AVIONICS MODE' box unticked at the top of the selections:

Hello!

Ok, thanks!

And it will be possible in the next version, when we begin at ramp, to have red banner:

http://www.airliners.net/photo/USA---Air/Fairchild-A-10C-Thunderbolt/2007166/L/&sid=371110f64e6d8676b494076400d934c2

Thanks!

Good evening!

Most of those flags will be removed by the ground crew before the pilot walks to the aircraft.

Just gotta hold the wheel brakes. I think there's been some discussion about this as it seems more of an issue in 1.1.1.0 than it has been before, but not sure if it's something they have any view on changing.

 

If you've got a controller with a switch that sends a continuous "button down" event then that can make do as a parking brake. I use a switch on a VRinsight panel for this. Exactly the same as just holding the toe brakes down, but without the strain. :)

 

Other than that I don't think there's anything you can do in MP. In SP you can hold 'w' to apply the brakes, pause it, release 'w', then unpause it - and the game will act as if you're still holding 'w' down. That obviously doesn't work in MP.

 

You might be able to use something like AutoHotKeys or your joystick profiling software to have it "hold down" the W key when you press a button.

Huum, i remember have got the issue ( 1.08 ) by the past, but strangely i have never get the issue again then... The only thing i see is i allways check the throttle are in lower position before the game load.

I remember the plane was start movine when the first engine start, but now it is ok. ( i use the keyboard for pass in idle, not the throttle ( my x52 don't have dual throttle ) ... Left engine first