Lucky Posted January 1, 2016 Posted January 1, 2016 Having a problem with the first Hammerfall mission. I anchor south of the target area. The Alpha team says "it's a trap", they get attacked. I'm told I can't go help," AAA threat too high". Then, all 3 BMP's get destroyed. I never get an option to send in the other team. I orbit for another 15 min and get nothing. This has happened 4 times in a row. Not sure If I'm doing something wrong. [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
tintifaxl Posted January 1, 2016 Posted January 1, 2016 If you have the radio tuned correctly to Overlord, you get further instructions. Windows 10 64bit, Intel i9-9900@5Ghz, 32 Gig RAM, MSI RTX 3080 TI, 2 TB SSD, 43" 2160p@1440p monitor.
baltic_dragon Posted January 1, 2016 Posted January 1, 2016 Having a problem with the first Hammerfall mission. I anchor south of the target area. The Alpha team says "it's a trap", they get attacked. I'm told I can't go help," AAA threat too high". Then, all 3 BMP's get destroyed. I never get an option to send in the other team. I orbit for another 15 min and get nothing. This has happened 4 times in a row. Not sure If I'm doing something wrong. What tintifaxl says, although if you get message that AAA threat is too high you probably hear the OL correctly. For option to send Bravo or Hueys in you first need to destroy both MANPADs if I recall correctly. You should get their position from Axeman via Overlord. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Yurgon Posted January 1, 2016 Posted January 1, 2016 I just exited my aircraft after flying this mission. ;) As Baltic Dragon says, if you heard the first calls from Overlord, the radios are probably set up correctly, so that shouldn't be a problem. Anyway, just to be sure: In this mission, Overlord transmits on 33 MHz on the VHF FM radio. Also maintain altitude (I've been at 18,000 ft) in order not to break line of sight with Overlord or the calls might not get through (I'm not sure where Overlord is located in this mission, though). After the destruction of the 3 APCs, I circled as instructed and made mental notes and set a couple of markpoints of enemies in the AO. I think it took much less than 15 minutes for Overlord to give the go-ahead to engage the enemy MANPADs, from which point the mission progressed smoothly. In case it happens again, can you save and upload the track? That should help with figuring out what's wrong.
Lucky Posted January 1, 2016 Author Posted January 1, 2016 (edited) I do have the right frequencies set as I have heard Uzi flight, Overlord and Alpha. I heard the message about Axeman being on station in 7 minutes. I started the timer in the A-10 and waited more then 15 minutes. One possibility is I did not maintain 18000 ft as I know I dropped below 17000' a couple of times if that makes a difference. I have the coords of the Mosque, camp and the area where the APC's get destroyed already plugged into the CDU before I arrive on station. Edited January 1, 2016 by Lucky Added info [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
baltic_dragon Posted January 1, 2016 Posted January 1, 2016 Are you both (Yurgon and Lucky) on the latest version of DCS? Unfortunately I am away fro home for few more days so I can't check it myself, but that part of the mission relies on simple time triggers, so I doubt it was broken by the latest version. Lucky, if nothing happens next time just go ahead and destroy both MANPADs even if you don't hear the message from the Overlord. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Yurgon Posted January 1, 2016 Posted January 1, 2016 I flew it on 1.5.2 (Release, not OpenBeta, although I still have the OpenBeta installed).
Lucky Posted January 2, 2016 Author Posted January 2, 2016 Are you both (Yurgon and Lucky) on the latest version of DCS? Unfortunately I am away fro home for few more days so I can't check it myself, but that part of the mission relies on simple time triggers, so I doubt it was broken by the latest version. Lucky, if nothing happens next time just go ahead and destroy both MANPADs even if you don't hear the message from the Overlord. I'm using the current open beta. Thanks for your help and thanks for creating this campaign. I'll try your suggestion when I get home. [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
baltic_dragon Posted January 6, 2016 Posted January 6, 2016 Hey Lucky, did it work? For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Lucky Posted January 6, 2016 Author Posted January 6, 2016 Hey Lucky, did it work? No, not on the open beta. Took out the 2 manpads and still nothing. Did this 2 more times and still nothing. When I ran the mission in 1.5.2 release version it worked. Don't know why. I didn't do anythinng different. Finally got the call to take out the manpads and then destroy the vehicles leaving the area. [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
baltic_dragon Posted January 6, 2016 Posted January 6, 2016 Funny, as it was upgraded and tested in Open Beta.. still glad you managed to move on! Please let me know how it goes from time to time! For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Lucky Posted January 7, 2016 Author Posted January 7, 2016 Funny, as it was upgraded and tested in Open Beta.. still glad you managed to move on! Please let me know how it goes from time to time! Will do, thanks. [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
Ganesh Posted January 7, 2016 Posted January 7, 2016 (edited) Finished yesterday with 1.5.2.48726 no problem (with tweaked terrain.lua) on my openbeta. Edited January 7, 2016 by Ganesh sidesweep regards Ganesh She: "Your orders from ED have reached a total amount of $ 1.168,94 and your hardware expenses are countless..." Me: "I can´t invest my money much better until i wait for Germanys Next Top Model": The Bo-105 PAH1A1 + Vulkan & continuous work on multithread & VR optimization! Asus Z490E - 10900k@5,3GHz - 64GB 3600 DDR4 - 4090FE - Reverb G2 - MFG Crosswinds +DamperMod - Selfmade TableMounts - Centered VirPil T-50 Base with 20cm Extension - TM Warthog & Hornet Grip - TM Throttle +SlewMod - Pimped MSFFB2 for Huey - JetSeat SE on a sawn out office Chair - PointCTRL
Lucky Posted January 14, 2016 Author Posted January 14, 2016 I may have been playing the the freeware version of the mission under the open beta. The payware missions under 1.5.2 are different. I cleaned up the files and only have the payware version installed now. [sIGPIC][/sIGPIC] Lian Li 011 Dynamic Evo, Core i9 11900K @ 5.0GHz, Corsair H150i CPU cooler, Asus Prime Z590-A, Radeon RX6800 XT64GB, Team T-Force Delta DDR4 3600, Corsair RM1000X PSU, Win 11 x64
bzhnono Posted January 14, 2016 Posted January 14, 2016 Made this mission yesterday and no rpoblem like that. My problem is that the trucks escaped (tried to get them with my mav but couldn't get a lock on them... and by the time I decided to go to bombing they vanish). In the debrief it says that I killed the boss in the truck even if I did not... I landed safely so mission was successful, is there a way to do it again anyway ? [sIGPIC][/sIGPIC]
baltic_dragon Posted January 14, 2016 Posted January 14, 2016 Made this mission yesterday and no rpoblem like that. My problem is that the trucks escaped (tried to get them with my mav but couldn't get a lock on them... and by the time I decided to go to bombing they vanish). In the debrief it says that I killed the boss in the truck even if I did not... I landed safely so mission was successful, is there a way to do it again anyway ? Thanks for letting me know, I will know about the bug, will be fixed with the upcoming patch :) Well, you can re-fly it as an option when you finish it... After that only if you extract the mission and open it as a single one. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
bzhnono Posted January 14, 2016 Posted January 14, 2016 Thanks for letting me know, I will know about the bug, will be fixed with the upcoming patch :) Well, you can re-fly it as an option when you finish it... After that only if you extract the mission and open it as a single one. Sorry, I didn't understand your answer. Will I be provided with options to re-fly missions next time I'll fly the campaign ? At the end of the campaign ? Otherwise I will just do the whole campaign again later, no problem :D [sIGPIC][/sIGPIC]
baltic_dragon Posted January 14, 2016 Posted January 14, 2016 No, the only option to re-fly the mission within the campaign is to choose the option in the briefing screen just after you finish it :) For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
bzhnono Posted January 14, 2016 Posted January 14, 2016 No, the only option to re-fly the mission within the campaign is to choose the option in the briefing screen just after you finish it :) Ah ok, no problem, I'll refly the whole thing once completed :) [sIGPIC][/sIGPIC]
Cherrug Posted January 14, 2016 Posted January 14, 2016 (edited) Having a problem with the first Hammerfall mission. I anchor south of the target area. The Alpha team says "it's a trap", they get attacked. I'm told I can't go help," AAA threat too high". Then, all 3 BMP's get destroyed. I never get an option to send in the other team. I orbit for another 15 min and get nothing. This has happened 4 times in a row. Not sure If I'm doing something wrong. I played the free version of the campaign. Two time happened that after the destruction of the first 3 BMP's one of the troops, (or crew?) survived the attack, and started in crouch position to move upstream by the river. I had to drop a bomb on his head :). Right after that I got the F10 option and I was able to finish the mission. Edited January 14, 2016 by Cherrug
bolek Posted January 14, 2016 Posted January 14, 2016 No, the only option to re-fly the mission within the campaign is to choose the option in the briefing screen just after you finish it :) AFAIK, the "Fly Again" option is normally always disabled when flying missions as part of the campaign. Does TEW do something special to enable it?
baltic_dragon Posted January 14, 2016 Posted January 14, 2016 AFAIK, the "Fly Again" option is normally always disabled when flying missions as part of the campaign. Does TEW do something special to enable it? Really? LOL, long time since I've flown the full campaign then. My bad! I will edit the previous post! Then what is left is to extract single missions and try them again. For more information, please visit my website. If you want to reach me with a bug report, feedback or a question, it is best to do this via my Discord channel. Details about the WinWing draw can be found here. Also, please consider following my channel on Facebook.
Yurgon Posted January 14, 2016 Posted January 14, 2016 I think a viable workaround might be to save the track, replay it, and immediately take control. ;)
Recommended Posts