[REPORTED] Autopilot altitude setting issue

If I set autopilot to hold 30000ft, it will climb to 40000ft and hold. If I then change the setting from 30000ft to 31000ft, it will climb to 42000ft. Seems it adds a value of one to every setting.

DCS:W Version 2.0.0.48763.61

I can confirm that

Confirmed.

Thanks - reported (ticket #33170).

[DUPLICATE] Autopilot Altitude

Hi

On selecting 20000 feet the aircraft keeps climbing. Selecting 10000 feet it will descend to 20000.

9000 for 19000 feet etc

It seems the alts are out by 10000 feet.

Cheers

Kiwi

already reported: http://forums.eagle.ru/showthread.php?t=156630

Selected Altitude for AP differs from actual Altitude

When dialing in a desired altitude using the Autopilot Altitude Selector, and then enabling AP along with the Selected Altitude Hold Button, the actual altitude that is being held and displayed on the HUD is way different from the altitude I entered into the Autopilot Altitude Selector.

See screenshot attached.

In this exampled, I entered 10,000 ft, and the aircraft climbed to more than 20,000 ft; see HUD vs. Altitude Selector.

According to CptSmiley, this is now fixed, but not released yet.

http://forums.eagle.ru/showthread.php?t=156925

ALTITUDE SELECT

Seems the AP Altitude select tumblers result in a 1000ft error.

If you set it say to 3000ft it will fly to and level at 4000ft. If you set all the tumblers to 0 the AP will fly to 1000ft

That is a known issue, and it looks like it will get fixed in the upcoming patch.

From the patch notes: " - Fixed Select altitude off by one"