Since V1.2.8 impossible to use my radio with the ATC...

[Skulleader]

Hello,

 

Since the V1.2.8 I can't use my radio, my home base is Kutaisi 134.00 but when I enter the good frequency impossible to speak with the ATC idem when I want landing or obtain one approach vector I can't call my ATC but impossible to hear his answer.

 

With the V1.2.7 everything was OK or more simple ?

 

Please can you give me the good settings or metod for have these communications ?

 

A great thanks in advance, Skull.

[Agent_wolf]

Is your radio-selector switch set on 3?

 

EDIT: sorry, I was thinking of the huey

Edited May 15, 2014 by Agent_wolf

[Teo]

Check the AM/FM selector. IIRC it defaults to the "wrong" position at the moment.

[Skulleader]

Hello guys,

 

Super, I would like to thank you for your answer and your assistance.

After few long minutes I've discovered the author of my problem, here I join you one screenshot of the guilty:

 

 

Bye and thanks again, Skull.

[joey45]

Check the AM/FM selector. IIRC it defaults to the "wrong" position at the moment.

 

Pre start up check list..

[thinkr]

thank you. this helped

[grabby]

Hi i have the same problem, but in the custom missions i assign the airport on the right coalition side, i set the frequency on the right one, i select the am switch but all the atc frequencies are black what i'm mistaking

[Cibit]

You need to flip the intercom/ radio switch down from intercom to radio on the radio selector panel.

Also you need to assign pilot radio trigger radio instead of pilot radio trigger intercom in options

[gospadin]

Hi i have the same problem, but in the custom missions i assign the airport on the right coalition side, i set the frequency on the right one, i select the am switch but all the atc frequencies are black what i'm mistaking

 

I made a post with pictures, hopefully it helps:

 

http://forums.eagle.ru/showpost.php?p=2565013&postcount=23

[grabby]

Solved it was the radio assist and the radio trigger... Thank you very much...

[grabby]

I have another question please, i'm using v1.5 i set the presets in the mission editor channel 1 on 124 i hear the squelch but not the atc if i put it in manual everything works fine what could be the problem?

[Cibit]

Use anything other than channel 1. That defaults to 127.500 IIRC and will revert back when entered in via ME. If you look down list of presets 124 is already entered for channel 19. Try that:)

[grabby]

Ok i'll give a try

[Cibit]

Link to a post and template I made a while ago. When it was really beta and no presets where assigned but you may find it useful

http://forums.eagle.ru/showpost.php?p=2293582&postcount=15