Silvern Posted September 5, 2019 Share Posted September 5, 2019 Can anyone please help me with a small issue? I have a group patrolling a zone, but it ignores the formation and just drives around in a column. Alpha = GROUP:FindByName( "Mechanized Alpha" ) Alpha:PatrolZones( { ZONE:New( "ZONE1" ) }, 30, "Cone" ) Link to comment Share on other sites More sharing options...
Galm99 Posted September 8, 2019 Share Posted September 8, 2019 Hey all, Im very new to MOOSE, basically I am looking to create a range location with player scoring much like seen in this video, but I couldn't find how to achieve it, can anyone help? ${1} Many thanks! RAF Air UK Website http://www.rafairuk-dcs.co.uk/ Mike Alpha Tango's YouTube Channel http://www.youtube.com/channel/UC9oKDSVDDDErRVjRFqgu3bA Intel i7-6700k RTX 2080TI Gigabyte Z170-gaming K3 32gb DDR4 RAM Hotas Warthog CV1 Link to comment Share on other sites More sharing options...
Habu_69 Posted September 8, 2019 Share Posted September 8, 2019 Search for Goldwater Range in this thread. Open the .miz file with a zip or RAR program. Find the MOOSE script. Should be some help to you. Link to comment Share on other sites More sharing options...
fargo007 Posted September 8, 2019 Share Posted September 8, 2019 Can anyone please help me with a small issue? I have a group patrolling a zone, but it ignores the formation and just drives around in a column. Alpha = GROUP:FindByName( "Mechanized Alpha" ) Alpha:PatrolZones( { ZONE:New( "ZONE1" ) }, 30, "Cone" ) Just for fun - try "Vee" and see if that works. Have fun. Don't suck. Kill bad guys. https://discord.gg/blacksharkden/ Link to comment Share on other sites More sharing options...
Silvern Posted September 10, 2019 Share Posted September 10, 2019 Just for fun - try "Vee" and see if that works. Nope, doesn't seem to work. Tried Vee, Cone, Diamond... Link to comment Share on other sites More sharing options...
Lonewolf73 Posted September 11, 2019 Share Posted September 11, 2019 Hi everyone, I have little issue with Airboss... I’d like to make messages from marshall and LSO little longer. I mean subtitle. I found “message.duration” in airboss.lua but it affect only few messages. Is the subduration in moose.lua the correct parameter? Thanks! Lonewolf Link to comment Share on other sites More sharing options...
mono6020 Posted September 11, 2019 Share Posted September 11, 2019 Hello, is there a way to add something like a "Stop" and "Resume" Command to the airboss Skipper Menu? the Stennis on our Server steams a fixed set of waypoints across the map with the recovery windows in between, when nobody is online we want to manually stop the carrier and resume its route again the next day when commanded. Link to comment Share on other sites More sharing options...
normre14232 Posted September 28, 2019 Share Posted September 28, 2019 ok clearly I have a syntax problem....script fails if run as written. However if I comment out the REDTASK = REDAIR:Engagetargets line, the script runs fine oops see copied txt....--Inbound Cargo Aircraft local C17=RAT:New("RAT_C17") C17:SetTakeoff("air") C17:SetDeparture("Inbound") C17:SetDestination("Al Dhafra AB") C17:SetSpawnDelay(300) C17:SetSpawnInterval(300) C17:NoRespawn() C17:Spawn(5) --Randomize Selection on REDCAP Templates = { "RED Template1","RED Template2" } GroupSize = {2,4} PickedGroupSize = GroupSize[math.random(1,2)] RED_SPAWN1 = SPAWN:New( "RED AIR1" ):InitLimit( 4, 1 ):InitGrouping(PickedGroupSize):InitRandomizeTemplate(Templates):InitDelayOn():SpawnScheduled(0,0) --See if REDAIR becomes agressive REDAIR = GROUP:FindByName("RED AIR1#001") REDTask = REDAIR:EnRouteTaskEngageTargets(100000,{},1) Messager = SCHEDULER:New( nil, function() -- TaskRandom = math.random(1,4) -- if TaskRandom == 1 then -- REDAIR:OptionROEWeaponFree() -- REDAIR:PushTask(REDTask,10 ) CrazyRed = MESSAGE:New( "All Players...All Players, Overlord. REDFOR Patrol observed leaving station. Be Alert for Possible Hostile Intent", 20):ToAll() -- end end, {}, 30, 1 ) Link to comment Share on other sites More sharing options...
BoneDust Posted September 30, 2019 Share Posted September 30, 2019 Could someone tell me what's is wrong with the script. Most of it works but I'm not seeing the Airboss in the F10 menu. The log is giving me this error: :50: attempt to call method 'SetMenuRecovery' (a nil value) stack traceback: [C]: in function 'SetMenuRecovery' Any thoughts? local AirbossStennis=AIRBOSS:New("USS Stennis") AirbossStennis:SetSoundfilesFolder("Airboss Soundfiles/") AirbossStennis:SetMenuSingleCarrier() AirbossStennis:SetMenuRecovery(30, 20, false) AirbossStennis:SetDespawnOnEngineShutdown() AirbossStennis:Load() AirbossStennis:SetAutoSave() AirbossStennis:SetTrapSheet() AirbossStennis:SetTACAN(74, "X", "MOM") AirbossStennis:SetICLS(11, "MOM") AirbossStennis:SetMarshalRadio(127.5, "AM") AirbossStennis:SetLSORadio(266, "AM") AirbossStennis:SetPatrolAdInfinitum() AirbossStennis:SetRadioRelayLSO("Wizard") AirbossStennis:SetRadioRelayMarshal("Rescue Helo Group") local CarrierExcludeSet=SET_GROUP:New():FilterPrefixes("Wizard"):FilterStart() AirbossStennis:SetExcludeAI(CarrierExcludeSet) -- Recovery window setting (time start, time end, CASE, day, Carrier turn into wind T/F ship speed -- Case I from 9 to 10 am. local window1=AirbossStennis:AddRecoveryWindow( "05:00", "14:55", 1, nil, true, 18) -- Case II with +15 degrees holding offset from 15:00 for 60 min. local window2=AirbossStennis:AddRecoveryWindow("15:00", "20:55", 2, nil, true, 18) -- Case III with +30 degrees holding offset from 2100 to 2200. local window3=AirbossStennis:AddRecoveryWindow("21:00", "23:59", 3, nil, true, 18) AirbossStennis:Start() Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
funkyfranky Posted October 2, 2019 Share Posted October 2, 2019 Any thoughts? AirbossStennis:SetMenuRecovery(30, 20, false) If you take that line out and the script works, your Moose.lua is too old as this feature was add later. A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
BoneDust Posted October 2, 2019 Share Posted October 2, 2019 If you take that line out and the script works, your Moose.lua is too old as this feature was add later. I'm using 2.4.13. Is that not the latest? Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
funkyfranky Posted October 2, 2019 Share Posted October 2, 2019 I'm using 2.4.13. Is that not the latest? Well, that's the latest release version, yes. But it's ancient. The good stuff is in the development version :) https://github.com/FlightControl-Master/MOOSE_INCLUDE/tree/develop/Moose_Include_Static Try the example mission https://github.com/FlightControl-Master/MOOSE_MISSIONS/tree/develop/OPS%20-%20Airboss/Caucasus/BOS-100%20-%20Stennis%20Hornet%20and%20Tomcat A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
BoneDust Posted October 2, 2019 Share Posted October 2, 2019 (edited) edit: Ok, I got it...thanks bud. Edited October 2, 2019 by BoneDust Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
BoneDust Posted October 2, 2019 Share Posted October 2, 2019 (edited) Using the static Moose.lua file it is not working. I get the user settings menu but nothing else; no airboss menu. Edited October 2, 2019 by BoneDust Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
Hardcard Posted October 3, 2019 Share Posted October 3, 2019 @BoneDust Post the script file that's erroring (should be specified in the dcs.log error, along with the line) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
BoneDust Posted October 6, 2019 Share Posted October 6, 2019 This is the new script: -- Rescue Helo @ USS John C. Stennis. rescueheloStennis = RESCUEHELO:New("USS Stennis", "Rescue Helo Group") rescueheloStennis:SetRescueOn() -- Helo will rescue downed pilot rescueheloStennis:SetTakeoffAir() rescueheloStennis:SetModex(54) -- Helo will be spawned and respawn in air. rescueheloStennis:Start() -------------------------------- -- NOTE: The RESCUE helo object has to be a GLOBAL variable or the lua garbage collector will deallocate it for unknown reasons. -- Rescue Helo @ USS Tarawa. rescueheloCg = RESCUEHELO:New("OHP1", "Rescue Helo Group CG") rescueheloCg:SetRescueOn() -- Helo will rescue downed pilot rescueheloCg:SetTakeoffAir() rescueheloStennis:SetModex(51) -- Helo will be spawned and respawn in air. rescueheloCg:Start() -- E-2D @ USS Stennis spawning in air. awacsStennis = RECOVERYTANKER:New("USS Stennis", "E2D Group") -- Custom settings: awacsStennis:SetAWACS() awacsStennis:SetCallsign(CALLSIGN.AWACS.Wizard) awacsStennis:SetTakeoffAir() awacsStennis:SetAltitude(25000) awacsStennis:SetSpeed(275) awacsStennis:SetRadio(254) awacsStennis:SetTACAN(55, "WIZ") awacsStennis:SetRacetrackDistances(40, 20) awacsStennis:SetHomeBase("USS Stennis") awacsStennis:SetModex(526) awacsStennis:Start() ------------------------------------------------------------------- -- S3 RECOVERY TANKER SCRIPT S3Stennis = RECOVERYTANKER:New(UNIT:FindByName("USS Stennis"), "TankerS3") --carrier unit name and tanker group name S3Stennis:SetTACAN(42,"ARC")--sets TACAN to 42, defaults to Y S3Stennis:SetRadio(257) --sets radio to 254, defaults to AM S3Stennis:SetTakeoffAir() --sets take off from carrier once, then respawn in the air S3Stennis:SetAltitude(7000) --change number to whatever altitude you want S3Stennis:SetSpeed(300) -- change number to whatever speed you want the tanker to fly S3Stennis:SetRacetrackDistances(20,5) --sets the racetrack distance from the carrier in NM S3Stennis:SetHomeBase ("USS Stennis") S3Stennis:SetModex(56) S3Stennis:Start() --------------------------------------------- -- KC130 Respawn Spawn_tanker1 = SPAWN:NewWithAlias("KC130 Tanker","TEXACO") Spawn_tanker1:InitRepeatOnEngineShutDown() Spawn_tanker1:InitLimit(1,6) Spawn_tanker1:SpawnScheduled(300,0) Spawn_tanker1:InitRadioFrequency(251) Spawn_tanker1:SpawnAtAirbase( AIRBASE:FindByName( AIRBASE.Caucasus.Kobuleti ), SPAWN.Takeoff.Hot ) Spawn_tanker1:OnSpawnGroup() Spawn_tanker1:EnRouteTaskTanker() Spawn_tanker2 = SPAWN:NewWithAlias("KC135 MPRS Tanker","SHELL") Spawn_tanker2:InitRepeatOnEngineShutDown() Spawn_tanker2:InitLimit(1,6) Spawn_tanker2:SpawnScheduled(300,0) Spawn_tanker2:InitRadioFrequency(256) Spawn_tanker2:SpawnAtAirbase( AIRBASE:FindByName( AIRBASE.Caucasus.Batumi ), SPAWN.Takeoff.Hot ) Spawn_tanker2:OnSpawnGroup() Spawn_tanker2:EnRouteTaskTanker() ----------------------------------AIRBOSS-------------- local AirbossStennis=AIRBOSS:New("USS Stennis") -- Add recovery windows: -- Case I from 9 to 10 am. local window1=AirbossStennis:AddRecoveryWindow( "9:00", "10:00", 1, nil, true, 25) -- Case II with +15 degrees holding offset from 15:00 for 60 min. local window2=AirbossStennis:AddRecoveryWindow("15:00", "16:00", 2, 15, true, 23) -- Case III with +30 degrees holding offset from 2100 to 2200. local window3=AirbossStennis:AddRecoveryWindow("21:00", "22:00", 3, 30, true, 21) -- Set folder of airboss sound files within miz file. AirbossStennis:SetSoundfilesFolder("Airboss Soundfiles/") -- Single carrier menu optimization. AirbossStennis:SetMenuSingleCarrier() -- Skipper menu. AirbossStennis:SetMenuRecovery(30, 20, false) -- Remove landed AI planes from flight deck. AirbossStennis:SetDespawnOnEngineShutdown() -- Load all saved player grades from your "Saved Games\DCS" folder (if lfs was desanitized). AirbossStennis:Load() -- Automatically save player results to your "Saved Games\DCS" folder each time a player get a final grade from the LSO. AirbossStennis:SetAutoSave() -- Enable trap sheet. AirbossStennis:SetTrapSheet() -- Start airboss class. AirbossStennis:Start() --- Function called when recovery tanker is started. function tanker:OnAfterStart(From,Event,To) -- Set recovery tanker. AirbossStennis:SetRecoveryTanker(tanker) -- Use tanker as radio relay unit for LSO transmissions. AirbossStennis:SetRadioRelayLSO(self:GetUnitName()) end --- Function called when AWACS is started. function awacs:OnAfterStart(From,Event,To) -- Set AWACS. AirbossStennis:SetRecoveryTanker(tanker) end --- Function called when rescue helo is started. function rescuehelo:OnAfterStart(From,Event,To) -- Use rescue helo as radio relay for Marshal. AirbossStennis:SetRadioRelayMarshal(self:GetUnitName()) end --- Function called when a player gets graded by the LSO. function AirbossStennis:OnAfterLSOGrade(From, Event, To, playerData, grade) local PlayerData=playerData --Ops.Airboss#AIRBOSS.PlayerData local Grade=grade --Ops.Airboss#AIRBOSS.LSOgrade ---------------------------------------- --- Interface your Discord bot here! --- ---------------------------------------- local score=tonumber(Grade.points) local name=tostring(PlayerData.name) -- Report LSO grade to dcs.log file. env.info(string.format("Player %s scored %.1f", name, score)) end This is the log errors: 2019-10-05 23:54:18.678 INFO SCRIPTING: 92940( -1)/I: RESCUEHELO00394.function(RESCUEHELO USS Stennis_Rescue Helo Group_01 | Starting Rescue Helo Formation v1.0.5 for carrier unit USS Stennis of type Stennis.) 2019-10-05 23:54:18.678 INFO SCRIPTING: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: attempt to call method 'InitModex' (a nil value) 2019-10-05 23:54:18.678 INFO SCRIPTING: stack traceback: [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20598: in function 'InitModex' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92936> (tail call): ? [C]: in function 'xpcall' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20606: in function '_call_handler' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20702: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20612> (tail call): ? [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:11: in main chunk 2019-10-05 23:54:18.679 INFO SCRIPTING: 92940( -1)/I: RESCUEHELO00399.function(RESCUEHELO OHP1_Rescue Helo Group CG_02 | Starting Rescue Helo Formation v1.0.5 for carrier unit OHP1 of type PERRY.) 2019-10-05 23:54:18.679 INFO SCRIPTING: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: attempt to call method 'InitModex' (a nil value) 2019-10-05 23:54:18.679 INFO SCRIPTING: stack traceback: [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20598: in function 'InitModex' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92936> (tail call): ? [C]: in function 'xpcall' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20606: in function '_call_handler' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20702: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20612> (tail call): ? [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:20: in main chunk 2019-10-05 23:54:18.679 INFO SCRIPTING: 91405( -1)/I: RECOVERYTANKER00404.function(Starting Recovery Tanker v1.0.6 for carrier unit USS Stennis of type Stennis for tanker group E2D Group.) 2019-10-05 23:54:18.679 INFO SCRIPTING: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91418: attempt to call method 'InitRadioCommsOnOff' (a nil value) 2019-10-05 23:54:18.679 INFO SCRIPTING: stack traceback: [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20598: in function 'InitRadioCommsOnOff' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91418: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91402> (tail call): ? [C]: in function 'xpcall' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20606: in function '_call_handler' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20702: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20612> (tail call): ? [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:37: in main chunk 2019-10-05 23:54:18.679 INFO SCRIPTING: 91405( -1)/I: RECOVERYTANKER00408.function(Starting Recovery Tanker v1.0.6 for carrier unit USS Stennis of type Stennis for tanker group TankerS3.) 2019-10-05 23:54:18.679 INFO SCRIPTING: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91418: attempt to call method 'InitRadioCommsOnOff' (a nil value) 2019-10-05 23:54:18.679 INFO SCRIPTING: stack traceback: [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20598: in function 'InitRadioCommsOnOff' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91418: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:91402> (tail call): ? [C]: in function 'xpcall' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20606: in function '_call_handler' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20702: in function <[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00006E83.lua"]:20612> (tail call): ? [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:51: in main chunk 2019-10-05 23:54:18.680 ERROR DCS: Mission script error: : [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:60: attempt to call method 'InitRadioFrequency' (a nil value) stack traceback: [C]: in function 'InitRadioFrequency' [string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis000040BF.lua"]:60: in main chunk Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
SGT Coyle Posted October 6, 2019 Share Posted October 6, 2019 Using the latest Moose.lua (3-10-19) and ai_a2a_dispatch, I assign my squadron (group of 2 F14)to takeoff form runway (Stennis), but I get one hooked up and ready to launch and one not. The one not hooked up to the cat, tries to launch anyway. Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
Hardcard Posted October 8, 2019 Share Posted October 8, 2019 (edited) @BoneDust You're getting different kinds of errors there (they might have a common cause, though). I'd say that the script that's erroring is probably Moose.lua, but I can't be sure. Go to C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta and see if you can find the temporary lua file called ~mis00001EAF.lua (Btw, the folder AppData is hidden by default in Windows, you'll need to make it visible by checking "Hidden items") If you find it, make a copy of it and post it here. However, it's quite likely that the temporary lua file ~mis00001EAF.lua has been automatically removed from your pc at this point, but you can always rerun your script in DCS while checking dcs.log, you'll get the errors again and new temporary lua files will be generated in that same folder (make a copy of the referenced lua file(s) BEFORE closing DCS). When you check the errors in dcs.log, pay attention to the following info: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: attempt to call method 'InitModex' (a nil value) Green --> Location of the temporary lua script file that's erroring (in this case, the error happened somewhere inside the file ~mis00001EAF.lua) Purple --> Specific line number where the error happened (in this case, the problematic method can be found in line 92955) Red --> Description of the error (in this case, the problematic method is InitModex) Simply post a copy of the temporary script file referenced in the error(s). On another note, after a quick look at your script, I've noticed some potential issues (I might be wrong, ofc): Spawn_tanker1 = SPAWN:NewWithAlias("KC130 Tanker","TEXACO") Spawn_tanker1:InitRepeatOnEngineShutDown() Spawn_tanker1:InitLimit(1,6) Spawn_tanker1:SpawnScheduled(300,0) -- I'd call this method at the end, after EnRouteTaskTanker() Spawn_tanker1:InitRadioFrequency(251) Spawn_tanker1:SpawnAtAirbase( AIRBASE:FindByName(AIRBASE.Caucasus.Kobuleti), SPAWN.Takeoff.Hot ) -- FindByName requires a string value, which must match the valid airbase name... I'm not sure AIRBASE.Caucasus.Kobuleti will provide it. Try "Kobuleti" instead, it should work Spawn_tanker1:OnSpawnGroup() -- This method is meant for you to call a function when the SPAWN object spawns... you're calling no function, so I don't see why you're using it Spawn_tanker1:EnRouteTaskTanker() Spawn_tanker2 = SPAWN:NewWithAlias("KC135 MPRS Tanker","SHELL") Spawn_tanker2:InitRepeatOnEngineShutDown() Spawn_tanker2:InitLimit(1,6) Spawn_tanker2:SpawnScheduled(300,0) -- I'd call this method at the end, after EnRouteTaskTanker() Spawn_tanker2:InitRadioFrequency(256) Spawn_tanker2:SpawnAtAirbase( AIRBASE:FindByName( AIRBASE.Caucasus.Batumi ), SPAWN.Takeoff.Hot ) -- FindByName requires a string value, which must match the valid airbase name... I'm not sure AIRBASE.Caucasus.Batumi will provide it. Try "Batumi" instead, it should work Spawn_tanker2:OnSpawnGroup() -- This method is meant for you to call a function when the SPAWN object spawns... you're calling no function, so I don't see why you're using it Spawn_tanker2:EnRouteTaskTanker() --- Function called when recovery tanker is started. function tanker:OnAfterStart(From,Event,To) -- I don't see tanker defined anywhere in your script. If it doesn't exist, this line will cause an error -- Set recovery tanker. AirbossStennis:SetRecoveryTanker(tanker) -- Use tanker as radio relay unit for LSO transmissions. AirbossStennis:SetRadioRelayLSO(self:GetUnitName()) end --- Function called when AWACS is started. function awacs:OnAfterStart(From,Event,To) -- I don't see awacs defined anywhere in your script. If it doesn't exist, this line will cause an error -- Set AWACS. AirbossStennis:SetRecoveryTanker(tanker) end --- Function called when rescue helo is started. function rescuehelo:OnAfterStart(From,Event,To) -- I don't see rescuehelo defined anywhere in your script. If it doesn't exist, this line will cause an error -- Use rescue helo as radio relay for Marshal. AirbossStennis:SetRadioRelayMarshal(self:GetUnitName()) end Edited October 8, 2019 by Hardcard [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
SGT Coyle Posted October 8, 2019 Share Posted October 8, 2019 After spawning a E2D for a AWACS patrol via wapoints. How can I repeat the spawn once he starts to RTB? I have him in the ME as a template, starting on carrier parking hot. I want to do the same for a tanker. Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
BoneDust Posted October 8, 2019 Share Posted October 8, 2019 @BoneDust You're getting different kinds of errors there (they might have a common cause, though). I'd say that the script that's erroring is probably Moose.lua, but I can't be sure. Go to C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta and see if you can find the temporary lua file called ~mis00001EAF.lua (Btw, the folder AppData is hidden by default in Windows, you'll need to make it visible by checking "Hidden items") If you find it, make a copy of it and post it here. However, it's quite likely that the temporary lua file ~mis00001EAF.lua has been automatically removed from your pc at this point, but you can always rerun your script in DCS while checking dcs.log, you'll get the errors again and new temporary lua files will be generated in that same folder (make a copy of the referenced lua file(s) BEFORE closing DCS). When you check the errors in dcs.log, pay attention to the following info: Error in SCHEDULER function:[string "C:\Users\dwigh\AppData\Local\Temp\DCS.openbeta\/~mis00001EAF.lua"]:92955: attempt to call method 'InitModex' (a nil value) Green --> Location of the temporary lua script file that's erroring (in this case, the error happened somewhere inside the file ~mis00001EAF.lua) Purple --> Specific line number where the error happened (in this case, the problematic method can be found in line 92955) Red --> Description of the error (in this case, the problematic method is InitModex) Simply post a copy of the temporary script file referenced in the error(s). On another note, after a quick look at your script, I've noticed some potential issues (I might be wrong, ofc): Spawn_tanker1 = SPAWN:NewWithAlias("KC130 Tanker","TEXACO") Spawn_tanker1:InitRepeatOnEngineShutDown() Spawn_tanker1:InitLimit(1,6) Spawn_tanker1:SpawnScheduled(300,0) -- I'd call this method at the end, after EnRouteTaskTanker() Spawn_tanker1:InitRadioFrequency(251) Spawn_tanker1:SpawnAtAirbase( AIRBASE:FindByName(AIRBASE.Caucasus.Kobuleti), SPAWN.Takeoff.Hot ) -- FindByName requires a string value, which must match the valid airbase name... I'm not sure AIRBASE.Caucasus.Kobuleti will provide it. Try "Kobuleti" instead, it should work Spawn_tanker1:OnSpawnGroup() -- This method is meant for you to call a function when the SPAWN object spawns... you're calling no function, so I don't see why you're using it Spawn_tanker1:EnRouteTaskTanker() Spawn_tanker2 = SPAWN:NewWithAlias("KC135 MPRS Tanker","SHELL") Spawn_tanker2:InitRepeatOnEngineShutDown() Spawn_tanker2:InitLimit(1,6) Spawn_tanker2:SpawnScheduled(300,0) -- I'd call this method at the end, after EnRouteTaskTanker() Spawn_tanker2:InitRadioFrequency(256) Spawn_tanker2:SpawnAtAirbase( AIRBASE:FindByName( AIRBASE.Caucasus.Batumi ), SPAWN.Takeoff.Hot ) -- FindByName requires a string value, which must match the valid airbase name... I'm not sure AIRBASE.Caucasus.Batumi will provide it. Try "Batumi" instead, it should work Spawn_tanker2:OnSpawnGroup() -- This method is meant for you to call a function when the SPAWN object spawns... you're calling no function, so I don't see why you're using it Spawn_tanker2:EnRouteTaskTanker() --- Function called when recovery tanker is started. function tanker:OnAfterStart(From,Event,To) -- I don't see tanker defined anywhere in your script. If it doesn't exist, this line will cause an error -- Set recovery tanker. AirbossStennis:SetRecoveryTanker(tanker) -- Use tanker as radio relay unit for LSO transmissions. AirbossStennis:SetRadioRelayLSO(self:GetUnitName()) end --- Function called when AWACS is started. function awacs:OnAfterStart(From,Event,To) -- I don't see awacs defined anywhere in your script. If it doesn't exist, this line will cause an error -- Set AWACS. AirbossStennis:SetRecoveryTanker(tanker) end --- Function called when rescue helo is started. function rescuehelo:OnAfterStart(From,Event,To) -- I don't see rescuehelo defined anywhere in your script. If it doesn't exist, this line will cause an error -- Use rescue helo as radio relay for Marshal. AirbossStennis:SetRadioRelayMarshal(self:GetUnitName()) end Thanks, I'll take a look. Alienware New Aurora R15 | Windows® 11 Home Premium | 64bit, 13thGen Intel(R) Core(TM) i9 13900KF(24-Core, 68MB| NVIDIA(R) GeForce RTX(TM) 4090, 24GB GDDR6X | 1 X 2TB SSD, 1X 1TB SSD | 64GB, 2x32GB, DDR5, 4800MHz | 1350W PSU, Alienware Cryo-tech (TM) Edition CPU Liquid Cooling power supply | G2 Rverb VR Link to comment Share on other sites More sharing options...
SGT Coyle Posted October 8, 2019 Share Posted October 8, 2019 Very stumped. Can't figure out why this isn't working. Using AI_A2A_DISPATCHING and the latest dev version Moose.lua 3-10-19 has a errorin the A2ADispatcher:SetSqudron function. This is the script: -- Define a SET_GROUP object that builds a collection of groups that define the EWR network. -- Here we build the network with all the groups that have a name starting with DF CCCP AWACS and DF CCCP EWR. DetectionSetGroup = SET_GROUP:New() DetectionSetGroup:FilterPrefixes( "EWR" ) DetectionSetGroup:FilterStart() Detection = DETECTION_AREAS:New( DetectionSetGroup, 80000 ) -- Setup the A2A dispatcher, and initialize it. A2ADispatcher = AI_A2A_DISPATCHER:New( Detection ) -- Enable the tactical display panel. A2ADispatcher:SetTacticalDisplay( true ) -- Initialize the dispatcher, setting up a border zone. This is a polygon, -- which takes the waypoints of a late activated group with the name CCCP Border as the boundaries of the border area. -- Any enemy crossing this border will be engaged. BLUE_Border_Zone = ZONE_POLYGON:New( "BLUE Border", GROUP:FindByName( "BLUE Border" ) ) A2ADispatcher:SetBorderZone( BLUE_Border_Zone ) -- Initialize the dispatcher, setting up a radius of 100km where any airborne friendly -- without an assignment within 100km radius from a detected target, will engage that target. A2ADispatcher:SetEngageRadius( 80000 ) -- Setup the squadrons. A2ADispatcher:SetSquadron( "CAP F14b", Stennis, { "CAP F14b" } , 20 ) A2ADispatcher:SetSquadron( "INTERCEPT F18c", Steniss, { "INTERCEPT F18c" } , 20 ) -- Setup the overhead A2ADispatcher:SetSquadronOverhead( "CAP F14b", 1.2 ) A2ADispatcher:SetSquadronOverhead( "INTERCEPT F18c", 1 ) -- Setup the Grouping A2ADispatcher:SetSquadronGrouping( "CAP F14b", 1 ) A2ADispatcher:SetSquadronGrouping( "INTERCEPT F18c", 2 ) -- Setup the Takeoff methods A2ADispatcher:SetSquadronTakeoffFromParkingCold( "CAP F14b" ) A2ADispatcher:SetSquadronTakeoffFromParkingCold( "INTERCEPT F18c" ) -- Setup the Landing methods A2ADispatcher:SetSquadronLandingAtEngineShutdown( "CAP F14b" ) A2ADispatcher:SetSquadronLandingAtEngineShutdown( "INTERCEPT F18c" ) -- Set the Squadron visible before startup of dispatcher. A2ADispatcher:SetSquadronVisible( "CAP F14b" ) A2ADispatcher:SetSquadronVisible( "INTERCEPT F18c" ) -- CAP Squadron execution. CAPZone1 = ZONE:New( "CAP Zone 1", GROUP:FindByName( "CAP Zone 1" ) ) A2ADispatcher:SetSquadronCap( "CAP F14b", CAPZone1, 4000, 10000, 500, 600, 800, "BARO" ) A2ADispatcher:SetSquadronCapInterval( "CAP F14b", 2, 30, 60, 1 ) CAPZone2 = ZONE:New( "CAP Zone 2", GROUP:FindByName( "CAP Zone 2" ) ) A2ADispatcher:SetSquadronCap( "INTERCEPT F18c", CAPZone2, 4000, 8000, 600, 800, 800, 1200, "BARO" ) A2ADispatcher:SetSquadronCapInterval( "INTERCEPT F18c", 2, 30, 120, 1 ) -- GCI Squadron execution. A2ADispatcher:SetSquadronGci( "CAP F14b" , 900, 1200 ) A2ADispatcher:SetSquadronGci( "INTERCEPT F18c" , 900, 1200 ) --CleanUp = CLEANUP_AIRBASE:New( { AIRBASE.Caucasus.Novorossiysk } ) -- Red attack simulation local Frequency = 300 RedSpawn1 = SPAWN :New( "RED Fighter 2" ) :InitLimit( 2, 10 ) :InitRandomizeRoute( 0, 0, 30000 ) --:InitDelayOn() :SpawnScheduled( Frequency, 0.4 ) RedSpawn2 = SPAWN :New( "RED Fighter" ) :InitLimit( 2, 10 ) :InitRandomizeRoute( 0, 0, 30000 ) --:InitDelayOn() :SpawnScheduled( Frequency, 0.4 ) Here's the log: 2019-10-08 19:00:18.883 INFO Dispatcher: loadMission C:\Users\Chris\AppData\Local\Temp\DCS\tempMission.miz 2019-10-08 19:00:18.884 INFO WORLDGENERAL: loading mission from: "C:\Users\Chris\AppData\Local\Temp\DCS\tempMission.miz" 2019-10-08 19:00:18.987 INFO EDCORE: (dDispatcher)enterToState_:4 2019-10-08 19:00:18.991 INFO Dispatcher: Start 2019-10-08 19:00:19.013 INFO Dispatcher: Terrain theatre Caucasus 2019-10-08 19:00:19.013 INFO TERRAIN: lSystem::load(./Mods/terrains/Caucasus\terrain.cfg.lua) 2019-10-08 19:00:19.013 INFO TERRAIN: lSystem::CleanScenes() 2019-10-08 19:00:19.013 INFO TERRAIN: lSystem::InitScenes() 2019-10-08 19:00:19.013 INFO EDTERRAIN4: lTerraDispatchImpl::setDate( day=1, month=6) 2019-10-08 19:00:19.023 WARNING GRAPHICSCORE: already registered Renderer callback 2019-10-08 19:00:19.036 INFO VISUALIZER: StartSimulation 2019-10-08 19:00:19.310 INFO GRAPHICSCORE: cascade shadows init (preset:'default' quality:4 layers:4 size:4096) 2019-10-08 19:00:19.319 ERROR_ONCE DX11BACKEND: render target 'fftw_foam' not found 2019-10-08 19:00:19.688 INFO Dispatcher: initial random seed = 1220220 2019-10-08 19:00:19.688 INFO Dispatcher: apply random seed = 1220220 2019-10-08 19:00:19.723 INFO WORLDGENERAL: loaded from mission Scripts/World/GPS_GNSS.lua 2019-10-08 19:00:20.160 INFO WORLDGENERAL: loaded from mission Config/View/SnapViewsDefault.lua 2019-10-08 19:00:20.161 INFO WORLDGENERAL: loaded from mission Config/View/View.lua 2019-10-08 19:00:20.162 INFO WORLDGENERAL: loaded from mission Config/View/Server.lua 2019-10-08 19:00:20.297 INFO Config: netview started 2019-10-08 19:00:20.355 INFO VISUALIZER: CameraIndependedPreload() 2019-10-08 19:00:20.355 INFO VISUALIZER: CameraIndependedPreload() finished 2019-10-08 19:00:20.355 INFO DCS: use_xRay: no 2019-10-08 19:00:20.799 INFO DCS: MissionSpawn:spawnShips 2 2019-10-08 19:00:20.800 ERROR WEAPONS: Can't get the fire position connector FIRE_CENTER_L_02: there is no connector with such name. 2019-10-08 19:00:20.801 ERROR woShip: connector 'SHIP_NOSE_ON_WATERLINE_CENTER_1' is not specified in model 'cvn74' 2019-10-08 19:00:20.801 ERROR woShip: connector 'SHIP_TAIL_ON_WATERLINE_CENTER_1' is not specified in model 'cvn74' 2019-10-08 19:00:20.806 WARNING EFFECTS2: BowwaveEmitter: unknown parameter 2019-10-08 19:00:20.903 INFO DCS: MissionSpawn:initScript 2019-10-08 19:00:20.903 INFO DCS: MissionSpawn:spawnCoalition red 2019-10-08 19:00:20.903 INFO DCS: MissionSpawn:spawnPlanes 0 2019-10-08 19:00:20.911 INFO DCS: MissionSpawn:spawnCoalition blue 2019-10-08 19:00:20.911 INFO DCS: MissionSpawn:spawnHelicopters 8 2019-10-08 19:00:20.915 INFO DCS: MissionSpawn:spawnPlanes 2 2019-10-08 19:00:21.024 INFO SCRIPTING: *** MOOSE GITHUB Commit Hash ID: 2019-10-03T10:15:26.0000000Z-7aa91ef1427e4ff8dbe8d63fc87710a29c8fd829 *** 2019-10-08 19:00:21.024 INFO SCRIPTING: *** MOOSE STATIC INCLUDE START 2019-10-03*** 2019-10-08 19:00:21.024 INFO SCRIPTING: Init: Scripts Loaded v1.1 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=0,[Group]=EWR E2D AWACS,[Country]=2,[units]={[1]=EWR E2D AWACS,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=0,[Group]=CAP F14b,[Country]=2,[units]={[1]=CAP F14b,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=0,[Group]=Tanker,[Country]=2,[units]={[1]=Tanker,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=0,[Group]=INTERCEPT F18c,[Country]=2,[units]={[1]=INTERCEPT F18c,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=3,[Group]=Stennis,[Country]=2,[units]={[1]=Stennis,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=2,[Category]=1,[Group]=BLUE Border,[Country]=8,[units]={[1]=BLUE Border,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=1,[Category]=0,[Group]=RED Fighter,[Country]=0,[units]={[1]=RED Fighter,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11882( 12484)/I: DATABASE00003._RegisterGroupTemplate({[Coalition]=1,[Category]=0,[Group]=RED Fighter 2,[Country]=0,[units]={[1]=RED Fighter 2,},}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=RED Fighter 2,}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=RED Fighter 2,}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=RED Fighter 2,}) 2019-10-08 19:00:21.027 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=RED Fighter 2,}) 2019-10-08 19:00:21.028 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=RED Fighter,}) 2019-10-08 19:00:21.028 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=RED Fighter,}) 2019-10-08 19:00:21.028 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=RED Fighter,}) 2019-10-08 19:00:21.028 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=RED Fighter,}) 2019-10-08 19:00:21.028 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=Tanker,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=Tanker,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=Tanker,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=Tanker,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=INTERCEPT F18c,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=INTERCEPT F18c,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=INTERCEPT F18c,}) 2019-10-08 19:00:21.029 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=INTERCEPT F18c,}) 2019-10-08 19:00:21.030 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=CAP F14b,}) 2019-10-08 19:00:21.030 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=CAP F14b,}) 2019-10-08 19:00:21.030 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=CAP F14b,}) 2019-10-08 19:00:21.030 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=CAP F14b,}) 2019-10-08 19:00:21.030 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=EWR E2D AWACS,}) 2019-10-08 19:00:21.031 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=EWR E2D AWACS,}) 2019-10-08 19:00:21.031 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=EWR E2D AWACS,}) 2019-10-08 19:00:21.031 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=EWR E2D AWACS,}) 2019-10-08 19:00:21.031 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=BLUE Border,}) 2019-10-08 19:00:21.031 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=BLUE Border,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=BLUE Border,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=BLUE Border,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 12015( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Group:,[2]=Stennis,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 11693( 12016)/I: DATABASE00003.AddGroup({[1]=Add GROUP:,[2]=Stennis,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 12021( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Register Unit:,[2]=Stennis,}) 2019-10-08 19:00:21.032 INFO SCRIPTING: 11371( 12022)/I: DATABASE00003.AddUnit({[1]=Add UNIT:,[2]=Stennis,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12031( 11313)/I: DATABASE00003._RegisterGroupsAndUnits(Groups:) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=INTERCEPT F18c,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=Tanker,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=CAP F14b,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=RED Fighter,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=EWR E2D AWACS,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=Stennis,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=RED Fighter 2,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12033( 11313)/I: DATABASE00003._RegisterGroupsAndUnits({[1]=Group:,[2]=BLUE Border,}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12056( 11315)/I: DATABASE00003._RegisterStatics({[statics]={[GroupsRed]={},[GroupsBlue]={},},}) 2019-10-08 19:00:21.033 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Anapa-Vityazevo,[3]=12,}) 2019-10-08 19:00:21.034 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Krasnodar-Center,[3]=13,}) 2019-10-08 19:00:21.034 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Novorossiysk,[3]=14,}) 2019-10-08 19:00:21.034 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Krymsk,[3]=15,}) 2019-10-08 19:00:21.035 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Maykop-Khanskaya,[3]=16,}) 2019-10-08 19:00:21.035 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Gelendzhik,[3]=17,}) 2019-10-08 19:00:21.035 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Sochi-Adler,[3]=18,}) 2019-10-08 19:00:21.036 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Krasnodar-Pashkovsky,[3]=19,}) 2019-10-08 19:00:21.036 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Sukhumi-Babushara,[3]=20,}) 2019-10-08 19:00:21.037 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Gudauta,[3]=21,}) 2019-10-08 19:00:21.037 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Batumi,[3]=22,}) 2019-10-08 19:00:21.037 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Senaki-Kolkhi,[3]=23,}) 2019-10-08 19:00:21.038 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Mineralnye Vody,[3]=26,}) 2019-10-08 19:00:21.038 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Nalchik,[3]=27,}) 2019-10-08 19:00:21.038 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Mozdok,[3]=28,}) 2019-10-08 19:00:21.039 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Tbilisi-Lochini,[3]=29,}) 2019-10-08 19:00:21.039 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Soganlug,[3]=30,}) 2019-10-08 19:00:21.040 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Vaziani,[3]=31,}) 2019-10-08 19:00:21.040 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Beslan,[3]=32,}) 2019-10-08 19:00:21.040 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Kobuleti,[3]=24,}) 2019-10-08 19:00:21.041 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Kutaisi,[3]=25,}) 2019-10-08 19:00:21.041 INFO SCRIPTING: 12083( 11317)/I: DATABASE00003._RegisterAirbases({[1]=Register Airbase:,[2]=Stennis,[3]=1,}) 2019-10-08 19:00:21.042 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=INTERCEPT F18c,}) 2019-10-08 19:00:21.042 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=CAP F14b,}) 2019-10-08 19:00:21.043 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=RED Fighter,}) 2019-10-08 19:00:21.043 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=Tanker,}) 2019-10-08 19:00:21.043 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=EWR E2D AWACS,}) 2019-10-08 19:00:21.044 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=Stennis,}) 2019-10-08 19:00:21.044 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=RED Fighter 2,}) 2019-10-08 19:00:21.044 INFO SCRIPTING: 11610(142545)/I: DATABASE00003.?({[Cargo]=BLUE Border,}) 2019-10-08 19:00:21.045 INFO SCRIPTING: 11500(142546)/I: DATABASE00003.?({[1]=Register ZONE:,[Name]=CAP Zone 1,}) 2019-10-08 19:00:21.045 INFO SCRIPTING: 11500(142546)/I: DATABASE00003.?({[1]=Register ZONE:,[Name]=CAP Zone 2,}) 2019-10-08 19:00:21.045 INFO SCRIPTING: *** MOOSE INCLUDE END *** 2019-10-08 19:00:21.049 ERROR DCS: Mission script error: : [string "C:\Users\Chris\AppData\Local\Temp\DCS\/~mis00002CCF.lua"]:110993: attempt to index field 'Airbase' (a nil value) stack traceback: [C]: ? [string "C:\Users\Chris\AppData\Local\Temp\DCS\/~mis00002CCF.lua"]:110993: in function 'SetSquadron' [string "C:\Users\Chris\AppData\Local\Temp\DCS\/~mis000073B7.lua"]:27: in main chunk 2019-10-08 19:00:21.091 INFO TACVIEW.EXPORT: Loading C++ flight data recorder from [C:\Users\Chris\Saved Games\DCS\Mods\tech\Tacview\bin\] 2019-10-08 19:00:21.092 INFO TACVIEW.EXPORT: Tacview 1.8.0 C++ flight data recorder successfully loaded 2019-10-08 19:00:21.114 INFO VISUALIZER: Preload() camera=-331009.229076, 21.226591, 392835.156250 radius=100000.000000 2019-10-08 19:00:21.114 INFO EDTERRAINGRAPHICS41: ITerrainGraphicsImpl4::forceLoading(): pos=(-331009, 21.2266, 392835), radius=100000 2019-10-08 19:00:21.154 INFO EDTERRAINGRAPHICS41: surface5 clean up LOD 0: left 1 released 6 2019-10-08 19:00:21.154 INFO EDTERRAINGRAPHICS41: surface5 clean up LOD 1: left 1 released 6 2019-10-08 19:00:21.154 INFO EDTERRAINGRAPHICS41: surface5 clean up 0.457400 ms 2019-10-08 19:00:21.199 INFO EDTERRAINGRAPHICS41: forestDistanceFactor has been changed to 0.500000. Update lod buffers. 2019-10-08 19:00:21.199 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectDeclBuffer() 2019-10-08 19:00:21.200 INFO EDTERRAINGRAPHICS41: InstanceManager2::updateObjectLodDeclBuffer() 2019-10-08 19:00:21.640 INFO VISUALIZER: Preload() finished 2019-10-08 19:00:21.646 INFO TACVIEW.DLL: Tacview Flight Data Recorder 1.8.0 Loaded 2019-10-08 19:00:21.646 INFO TACVIEW.DLL: Config={bookmarkShortcut=0, clientTelemetryPassword="", compressionLevel=1, dataRecordingEnabled=1, debugModeEnabled=0, hostTelemetryPassword="", playbackDelay=600, profilingPeriod=600, realTimeTelemetryPort=42674, recordClientsSessionsEnabled=0, remoteControlPassword="", remoteControlPort=42675} 2019-10-08 19:00:21.648 INFO DCS: Screen: mission_offline 2019-10-08 19:00:21.648 INFO Dispatcher: precache units resources in slots 2019-10-08 19:00:21.680 INFO Lua: Lua CPU usage: metric: average mission loading: 16.0580 % 2019-10-08 19:00:21.680 INFO Dispatcher: loadMission Done: Сontrol passed to the player 2019-10-08 19:00:23.173 INFO TACVIEW.DLL: Recording flight data in [C:\Users\Chris\Documents\Tacview\Tacview-20191008-150023-DCS-CTF_Protection_Ops.zip.acmi] Mission attached Any thoughts appreciated.CTF_Protection_Ops.miz Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
gunterlund21 Posted October 9, 2019 Share Posted October 9, 2019 did you spell Stennis right in this line A2ADispatcher:SetSquadron( "INTERCEPT F18c", Steniss, { "INTERCEPT F18c" } , 20 ) I was in Art of the Kill D#@ it!!!! Link to comment Share on other sites More sharing options...
Neon Posted October 9, 2019 Share Posted October 9, 2019 Is anyone else having a problem with some functions just not doing anything? In my case it’s AI_CARGO_APC AND ZONE_CAPTURE_COALITION. Logs don’t through any errors all the Ai units just sit there doing nothing. They won’t board or move to capture the zone. The system shows that it is filtering for my sets and also places the zone marker on the map but none of the units move. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
SGT Coyle Posted October 9, 2019 Share Posted October 9, 2019 (edited) did you spell Stennis right in this line A2ADispatcher:SetSquadron( "INTERCEPT F18c", Steniss, { "INTERCEPT F18c" } , 20 ) No. But fixing that made no difference. Neither did fixing the spelling of "CAP F14" to "CAP F14b" like it should be. Edited October 9, 2019 by SGT Coyle Night Ops in the Harrier IYAOYAS Link to comment Share on other sites More sharing options...
funkyfranky Posted October 9, 2019 Share Posted October 9, 2019 This is the new script: Your error messages say version of the recovery tanker is 1.0.5, while the current version is 1.0.9. You get errors because you are using a Moose.lua version which does not include the functions you are using. A warrior's mission is to foster the success of others. i9-12900K | MSI RTX 3080Ti Suprim X | 128 GB Ram 3200 MHz DDR-4 | MSI MPG Edge Z690 | Samung EVO 980 Pro SSD | Virpil Stick, Throttle and Collective | MFG Crosswind | HP Reverb G2 RAT - On the Range - Rescue Helo - Recovery Tanker - Warehouse - Airboss Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now