=Andre= Posted September 17, 2015 Author Share Posted September 17, 2015 Hi there, Sorry to bother you Andre. Just wondering if anyone else has a constant wining noise when using this latest version, mainly with A10. I know the motors make noise but my seat has never made this before, its like the motors are stuck, and they make a humming type sound that goes up and down in pitch at a constant pace, I can feel all the motors vibrating if I put my hand on them, but its not noticeable when I'm sat on them. all the normal rattles and bumps work fine, its just this constant noise, never heard it before. Sorry I know its hard to explain. Just wondering if others have the same, or if theres a problem with my install or seat? Cowboy10uk Hi Dave, do you have that strange noise when SimShaker is not started up? Do you have that noise when SimShaker is started up but DCS mission is not running? Please answer at Gametrix-related thread http://forums.eagle.ru/showthread.php?t=134704&goto=newpost Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
GeneralDynamics Posted September 19, 2015 Share Posted September 19, 2015 Please try stall shudder attached sample. May be you will find it more suitable for your rig. Hi Andrey, sorry for the delay - I tested the stall module and it does feel more like what I'd expect, but then again, I'm not a "real" pilot. It seemed to me that a stall shudder should feel more like a bucking or buffetting sensation than a vibration. Maybe some of our real pilots could comment further on this? Also, I don't know what was going on when I tested the ground roll effect the first time when I mentioned it didn't seem to match the rolling speed. Since I got SimShaker working through the remote laptop, the ground roll effect seems spot on, scaling properly with speed, even when rolling very slowly. System Specs: Win 10 x64 Pro, ASUS Maximus X Formula, i9-9900K @ 4.7 GHz, 32GB Corsair Dominator Platinum 3200 MHz, NZXT Kraken X73 AIO Cooler, Titan X Pascal GPU, EVGA Supernova 1000W P2 PSU, C: 1TB Samsung 960 Pro m.2 PCIe SSD, D: 1TB Samsung 850 Pro SATA SSD, HT Omega Claro PCIe 7.1 Sound, Denon AVR-1709 7.1 Receiver, 46" Sharp Aquos Quattron Main Screen, 27" Acer T272HL TouchScreen + Helios, TrackIR 5, ThrustMaster HOTAS Warthog, Crosswinds pedals, SimShaker Link to comment Share on other sites More sharing options...
=Andre= Posted September 19, 2015 Author Share Posted September 19, 2015 Hi Andrey, sorry for the delay - I tested the stall module and it does feel more like what I'd expect, but then again, I'm not a "real" pilot. It seemed to me that a stall shudder should feel more like a bucking or buffetting sensation than a vibration. Maybe some of our real pilots could comment further on this? Also, I don't know what was going on when I tested the ground roll effect the first time when I mentioned it didn't seem to match the rolling speed. Since I got SimShaker working through the remote laptop, the ground roll effect seems spot on, scaling properly with speed, even when rolling very slowly. Hi Neil, thanks for the feedback. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Forrest Gimp Posted September 26, 2015 Share Posted September 26, 2015 (edited) Andre, I was hoping you may be able to assist me. I've just ordered a buttkicker and in preparation attempted to install Simshaker; however, whenever simshaker tries to run I get a "clickonce has stopped responding error". The error itself seems to have no obvious solution as far as I can tell, so I figured I'd ask. It must be noted that I don't actually have the buttkicker as of yet (I just like to be ready) and I have the 4.5 runtime+ installed. Thanks for your hard work, by the way :) edit: I have no anti-virus installed as well for what its worth. Edited September 26, 2015 by Forrest Gimp Link to comment Share on other sites More sharing options...
=Andre= Posted September 26, 2015 Author Share Posted September 26, 2015 Andre, I was hoping you may be able to assist me. I've just ordered a buttkicker and in preparation attempted to install Simshaker; however, whenever simshaker tries to run I get a "clickonce has stopped responding error". The error itself seems to have no obvious solution as far as I can tell, so I figured I'd ask. It must be noted that I don't actually have the buttkicker as of yet (I just like to be ready) and I have the 4.5 runtime+ installed. Thanks for your hard work, by the way :) edit: I have no anti-virus installed as well for what its worth. I've nerver encountered such an issue. It seems to be .Net Framework problem. May be you should try to refresh .Net Framework installed first of all. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Forrest Gimp Posted September 28, 2015 Share Posted September 28, 2015 Hmm, Do you think you could advise me on where to find the installed files for simshaker? I've managed to install and run it fine on my laptop, so I was thinking of perhaps copying it over and seeing if that helps. I doubt it will, considering it looks like a .net framework error, but this is all I can think of as this seems to be a very rare error. Link to comment Share on other sites More sharing options...
=Andre= Posted September 28, 2015 Author Share Posted September 28, 2015 Hmm, Do you think you could advise me on where to find the installed files for simshaker? I've managed to install and run it fine on my laptop, so I was thinking of perhaps copying it over and seeing if that helps. I doubt it will, considering it looks like a .net framework error, but this is all I can think of as this seems to be a very rare error. I think it may help as a temporary workaround. ClickOnce is just a deploying part of .Net. You can find SimShaker files somewere in %UserProfile%\AppData\Local\Apps\2.0\ Try to find ibaEffectsForDcsWorld_WF.exe The folder should look like this https://yadi.sk/i/ukgg777yjP3jF Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Forrest Gimp Posted September 28, 2015 Share Posted September 28, 2015 Good news. When I run the .exe directly from the install directory simshaker works fine, So i've made a new shortcut and copied that over to the desktop and now all is good. Thanks again for your help :) Link to comment Share on other sites More sharing options...
=Andre= Posted September 28, 2015 Author Share Posted September 28, 2015 Good news. When I run the .exe directly from the install directory simshaker works fine, So i've made a new shortcut and copied that over to the desktop and now all is good. Thanks again for your help :) You are welcome :) Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Kuky Posted October 5, 2015 Share Posted October 5, 2015 I have changed the way my seat is "fixed" to the MDF base of my "pit" to give the seat more shake (before it was screwed in meaning the vibrations were bit less intense as base sits on the floor and can't shake that much... but with these springs installed its another story :pilotfly: No longer active in DCS... Link to comment Share on other sites More sharing options...
f4l0 Posted October 6, 2015 Share Posted October 6, 2015 Kuky, nice Setup. I attached my basspump iii to my office chair and enhanced the power by adding 0.5kg of extra weight. In combination with my voicemeeter setup, this is really cool! f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
=Andre= Posted October 6, 2015 Author Share Posted October 6, 2015 I have changed the way my seat is "fixed" to the MDF base of my "pit" to give the seat more shake (before it was screwed in meaning the vibrations were bit less intense as base sits on the floor and can't shake that much... but with these springs installed its another story :pilotfly: Cool stuff :thumbup: Thanks you for sharing that, Kuky. Your BK Amp looks interesting, especially volume control. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
=Andre= Posted October 6, 2015 Author Share Posted October 6, 2015 Kuky, nice Setup. I attached my basspump iii to my office chair and enhanced the power by adding 0.5kg of extra weight. In combination with my voicemeeter setup, this is really cool! Hi Olaf, I've started to use Voice Meeter Banana with RoF and BK, thank you for sharing that :thumbup: Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
f4l0 Posted October 6, 2015 Share Posted October 6, 2015 Hi Olaf, I've started to use Voice Meeter Banana with RoF and BK, thank you for sharing that :thumbup: The new OpenBeta 1.5 provides more low end sounds thus the combination of SimShaker and ingame sound is really nice ;-). f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
=Andre= Posted October 6, 2015 Author Share Posted October 6, 2015 The new OpenBeta 1.5 provides more low end sounds thus the combination of SimShaker and ingame sound is really nice ;-). Yes, DCS low frequency sounds are pretty good. Can't say the same about RoF :( Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Tricky11 Posted October 6, 2015 Share Posted October 6, 2015 hey bud..im getting this error with dcs 1.5 MyVibroEffect.Load: Could not find file :ibaVibroEffects\p3_6_1_1.uwv Link to comment Share on other sites More sharing options...
=Andre= Posted October 6, 2015 Author Share Posted October 6, 2015 hey bud..im getting this error with dcs 1.5 MyVibroEffect.Load: Could not find file :ibaVibroEffects\p3_6_1_1.uwv Hi Chris, that's not dcs 1.5 related. For some reason Mustang guns fire effect file is missing at your PC. I would recommend to check file system and reinstall SimShaker to fix the problem. Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Chief1942 Posted October 7, 2015 Share Posted October 7, 2015 Andrey, I do not have the guns effect in the P-51 in 1.5 Beta. Everything works fine in the 1.2.6 install but not in the 1.5. I've checked the files for weapon sounds/effects in both installs and they appear to be the same. I also notice that even though I am firing the guns I get no sound, tracers, or any other effects. Is that something we have to expect what with 1.5 being Beta? Intel i5-4690K Devil's Canyon, GForce TitanX, ASUS Z-97A MB, 16GB GDDR3 GSkill mem, Samsung SSD X3,Track IR, TM Warthog, MFG Crosswind pedals, Acer XB280HK monitor,GAMETRIX KW-908 JETSEAT Link to comment Share on other sites More sharing options...
f4l0 Posted October 7, 2015 Share Posted October 7, 2015 I just got the L-39C. A few features are working already. I'll late take a look into the L-39C luas. Maybe I'm able to find the entries for gears/brakes f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums https://simshaker-for-aviators.github.io/SimShaker-for-Aviators-Releases/ Link to comment Share on other sites More sharing options...
=Andre= Posted October 17, 2015 Author Share Posted October 17, 2015 :poster_offtopic: http://forums.eagle.ru/showpost.php?p=2522024&postcount=6 Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Tricky11 Posted November 7, 2015 Share Posted November 7, 2015 Hi Chris, that's not dcs 1.5 related. For some reason Mustang guns fire effect file is missing at your PC. I would recommend to check file system and reinstall SimShaker to fix the problem. re-installed sim shaker but still doing the same buddy? Link to comment Share on other sites More sharing options...
=Andre= Posted November 7, 2015 Author Share Posted November 7, 2015 re-installed sim shaker but still doing the same buddy? Let's I have a look at your PC via Skype or Team Viewer. Is it OK for you? Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
=Andre= Posted November 7, 2015 Author Share Posted November 7, 2015 Gents, another update is published http://dreamsimteam.blogspot.ru/2015/11/simshaker-for-dcs-world-update-10627.html Gametrix JetSeats thread (in English) , SimShaker addon for bass-shakers thread (in English), Andre's blog, downloads, manuals (in English). [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Tricky11 Posted November 7, 2015 Share Posted November 7, 2015 Let's I have a look at your PC via Skype or Team Viewer. Is it OK for you? Yeah I can do team viewer on Sunday morning if you're about Link to comment Share on other sites More sharing options...
mr_mojo97 Posted November 7, 2015 Share Posted November 7, 2015 Nescafé, do you have have both motorsport (3in1)and sim shaker for DCS World installed? I had this exact error message. Only way around this that I found was to exit the 3in1 in the task bar as they both run on boot up. Then it seems to work (for me at least). Hope that helps. Les MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
Recommended Posts