Jump to content

Recommended Posts

Posted

Hi all

 

Im having trouble doing a vertical take off with the MI-8. Ive flown the huey a few times and can do vertical take off no probs but with the MI-8 I can get it off the ground but it seems to go forward like a fixed wing before it takes off? Am i doing something wrong?

 

It seems to travel forwards before take off

 

Thanks in advance

Posted

Help need with vertical take off with the MI-8

 

Hi all

 

Im having trouble doing a vertical take off with the MI-8. Ive flown the huey a few times and can do vertical take off no probs but with the MI-8 I can get it off the ground but it seems to go forward like a fixed wing before it takes off? Am i doing something wrong?

 

It seems to travel forwards before take off

 

Thanks in advance

Posted

Pull the Stick a bit backwards AND to the right.

Optionaly I use the Trimmer to hold this Position of the Stick.

Push the right Pedal a bit, when you raise the collective.

System Specs: AMD Ryzen 7 5800X, RX 6900 XT, 64GB RAM // Tobsen CM Kollektiv, VPC CM3 Throttle, VPC WarBRD Rudder Pedals, VPC T-50 CM2 + WarBRD Base  VR: HP Reverb G2

Helis: UH-1H / KA-50 3 / Mi-8 / Mi-24P / SA-342 / AH-64D / OH 58D / CH-47F  Jets: F-5E / F-14A/B / F/A-18C / MC-2000 / A-10C II / AV-8B / AJS 37 / MIG-21bis  / F-16C / F-15E / F-4E 

Maps: Nevada / Persian Gulf / Normandie 2.0 / Syria / South Atlantic / Sina / Cold War Germany  WWII: Spitfire / WWII Assets Pack  Tech.: Combined Arms / NS430 / Supercarrier    

Waiting for:  BO-105 / G.91R / Tornado IDS / Eurofighter

Posted (edited)

many thanks do you know what the keyboard shortcut key is for that? I tried an instant mission with engines on but this is where its happening. I raise the collective bit by bit but the copter just moves forward not up?

Edited by itye1970
Posted

one attempt at take off

 

Do you have stablisation turned on?

 

It might be worth including a track with the control position overlay turned on (RCtrl-Enter).

 

[ame]

[/ame]
Posted

As mentioned pitch stabilization is essential with the MI-8. Also trim the cyclic slightly back and slightly right before take off.

HP G2 Reverb (Needs upgrading), Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. set to OpenXR, but Open XR tool kit disabled.

DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), DLSS setting is quality at 1.0. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC... Everything needs upgrading in this system!.

Vaicom user and what a superb freebie it is! Virpil Mongoose T50M3 base & Mongoose CM2 Grip (not set for dead stick), Virpil TCS collective with counterbalance kit (woof woof). Virpil Apache Grip (OMG). MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound... goodbye VRS.

Posted
Hi all

 

Im having trouble doing a vertical take off with the MI-8. Ive flown the huey a few times and can do vertical take off no probs but with the MI-8 I can get it off the ground but it seems to go forward like a fixed wing before it takes off? Am i doing something wrong?

 

It seems to travel forwards before take off

 

Thanks in advance

 

Made this for you hope it helps

i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64

[sIGPIC][/sIGPIC]

Posted

I personally wouldn't recommend trimming at takeoff, simply because if you always start with neutral trim then you'll start off with the controls in the same place every time; but that's my preference.

 

Either way though, the way to lift in a helo is to SLOWLY raise the collective while rocking the collective (gently) forward/back, left/right (and pedals) to feel for the point where the helo will lift straight into the air.

 

Oh and the Mi-8 won't necessarily hover level with the horizon; this is normal, but can provide a bit of an illusion.

Posted

Perhaps a video or track of your method would be useful. I can't imagine not trimming to take off vertically. Or not trimming to come to a hover:huh:

i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64

[sIGPIC][/sIGPIC]

Posted
Perhaps a video or track of your method would be useful. I can't imagine not trimming to take off vertically. Or not trimming to come to a hover:huh:

 

No problem, I've attached a track to this thread. It's a quick circuit, no trimming at any point.

 

One thing I noticed when doing this, using the quick free flight mission, is that the wind is coming from behind you at the start. This will of course make the tendency to drift forward all that much stronger.

 

Helicopters can hover, but they should always be pointed into wind for takeoff and landing; it's easier and safer. Easy to forget when simming though.

mi8.trk

Posted

I guess the trk is corrupt, you took off,got clear of airport buildings, touched ground 3 times and then lost your rotor blades in a banking turn too close to the water:megalol:

i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64

[sIGPIC][/sIGPIC]

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...