FoxTwo Posted February 8, 2021 Posted February 8, 2021 (edited) 8 hours ago, f4l0 said: Only the AB? With latest beta you mean the DCS beta or SSA beta? Yeah sorry I wasn't clear. I'm on the SSA beta (2.1.7.0 at the moment), and for the last two updates going into AB in the F-18 results in the engine rumble basically just... stopping. DCS openbeta too, if that matters. I just tried it again, forget what I said... it does appear to be technically working. But compared to the engine rumble/beat it's so high frequency that it feels like you're transitioning from pavement to smooth glass in a car. There's not a lot of felt effect in afterburner, at least with a transducer attached to a chair. Edited February 8, 2021 by FoxTwo
nobuttons Posted February 8, 2021 Posted February 8, 2021 Ok, I just borrowed a Jet Seat from a friend and am eager to try it. I hooked it up and the self test for the Shaker, and SSA both work! It seems to get support for the F-14 I need a beta build though? Where can I download that, and I need any special config files too? Thanks in advance! SYS : RYZEN 9 5950X + Crosshair VIII Hero + RTX 3090 FE 32GB + TridentZ NEO 32GB 3600MHz + FireCuda 520 1TB VR : Pimax 8KX : DCS 1.0, VR, Steam 100% (3148x3160), FOV 120 degrees || Quest2 || Index || Reverb G2 SIM : DCS || Star Wars Squadrons || Rise of Flight || IL2 Battle of Stalingrad || Elite Dangerous || Star Citizen DCS: Textures & Terrain High, Water & Vis Medium, Heat Blur Low, Shadows Medium, MSAA 2x, DoF OFF, Lens Flare Only, Motion Blur Off, SSAA & SSLR Off, Clutter 170, Trees 66%, Smoke 0, Anisotropic 2x, Terrain Shadows Flat, Cockpit Global Illumination On PIT : VKB Gunfighter base + VKB F14 grip || VKB Kosima grip + Virpl TC50 CM3 throttle + Logitch G pedals + Pimax Leap Motion hand tracking + SimShaker feedback
boschdi Posted February 9, 2021 Posted February 9, 2021 Hi there I got the same problem that simshaker is not working anymore due to framework.net error. I also cannot download the beta from the onedrive link. Could someone upload the beta to another provider? THX -boschdi
epolta Posted February 9, 2021 Posted February 9, 2021 Love the new JF-17 effects in beta!! Jet feels alive!! Thanks @f410 1
f4l0 Posted February 9, 2021 Author Posted February 9, 2021 13 hours ago, nobuttons said: Ok, I just borrowed a Jet Seat from a friend and am eager to try it. I hooked it up and the self test for the Shaker, and SSA both work! It seems to get support for the F-14 I need a beta build though? Where can I download that, and I need any special config files too? Thanks in advance! https://1drv.ms/u/s!AldPAmClTeGqgQlC2IVQGgGkRXqf?e=cW0R9X 5 hours ago, boschdi said: Hi there I got the same problem that simshaker is not working anymore due to framework.net error. I also cannot download the beta from the onedrive link. Could someone upload the beta to another provider? THX -boschdi So you can not download this file: https://1drv.ms/u/s!AldPAmClTeGqgQlC2IVQGgGkRXqf?e=cW0R9X Which errors do you get? 15 hours ago, FoxTwo said: Yeah sorry I wasn't clear. I'm on the SSA beta (2.1.7.0 at the moment), and for the last two updates going into AB in the F-18 results in the engine rumble basically just... stopping. DCS openbeta too, if that matters. I just tried it again, forget what I said... it does appear to be technically working. But compared to the engine rumble/beat it's so high frequency that it feels like you're transitioning from pavement to smooth glass in a car. There's not a lot of felt effect in afterburner, at least with a transducer attached to a chair. Did you increase the AB effect strength? 1 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
FoxTwo Posted February 9, 2021 Posted February 9, 2021 (edited) 9 hours ago, f4l0 said: Did you increase the AB effect strength? Nevermind, I think it's a sound module thing. The output for afterburner seems really low when the audio is set to stereo but it's fine in mono. That said, the A-4E-C 2.0/EFM beta isn't currently working. https://github.com/heclak/community-a4e-c/releases/tag/v2.0.0-beta-1 Edited February 9, 2021 by FoxTwo
Raven (Elysian Angel) Posted February 10, 2021 Posted February 10, 2021 On 2/9/2021 at 1:38 AM, boschdi said: I got the same problem that simshaker is not working anymore due to framework.net error. Me too, I'm on the latest "stable" version. What I found though, is that manually launching SimShaker works just fine: I only get the error spam if I let DCS auto-launch it. Spoiler Ryzen 9 5900X | 64GB G.Skill TridentZ 3600 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X570-E GAMING | Samsung 990Pro 2TB + 960Pro 1TB NMVe | VR: Varjo Aero Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Icaro_07 Posted February 11, 2021 Posted February 11, 2021 Hello, i was reading a book and says that at different aoa the airplane start to make vibration (buffet) depending on the amount of aoa, is there a way to replicate this with the simshaker, I know there is the stall effect, but this just happens when this condition is present, is there a way to replicate this ? Or mod something to make simshaker even better and give a better experience in DCS.
f4l0 Posted February 11, 2021 Author Posted February 11, 2021 11 hours ago, Raven (Elysian Angel) said: Me too, I'm on the latest "stable" version. What I found though, is that manually launching SimShaker works just fine: I only get the error spam if I let DCS auto-launch it. I need some more details about the error, I also implemented some extended logging capabilities, thus SSA writes a log.log file in the installation folder. These information might help me to narrow down the issue... 3 hours ago, Icaro_07 said: Hello, i was reading a book and says that at different aoa the airplane start to make vibration (buffet) depending on the amount of aoa, is there a way to replicate this with the simshaker, I know there is the stall effect, but this just happens when this condition is present, is there a way to replicate this ? Or mod something to make simshaker even better and give a better experience in DCS. The stall effect is the buffet effect and it is dependent on the AoA and for most of the planes fine tuned with feedback of former fighter pilots. Some planes have a long curve from weak to strong buffeting, some are very fast till the effect reaches it's maximum... f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
Raven (Elysian Angel) Posted February 11, 2021 Posted February 11, 2021 (edited) 7 hours ago, f4l0 said: I need some more details about the error, I also implemented some extended logging capabilities, thus SSA writes a log.log file in the installation folder. These information might help me to narrow down the issue... It might be an incompatibility issue with Windows 10, since it was a spam of .NET errors and disabling "auto start with Windows" seems to have fixed it: now I don't get them even when I Iet DCS auto-launch SSA: log.log Edited February 11, 2021 by Raven (Elysian Angel) Spoiler Ryzen 9 5900X | 64GB G.Skill TridentZ 3600 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X570-E GAMING | Samsung 990Pro 2TB + 960Pro 1TB NMVe | VR: Varjo Aero Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
f4l0 Posted February 12, 2021 Author Posted February 12, 2021 16 hours ago, Raven (Elysian Angel) said: It might be an incompatibility issue with Windows 10, since it was a spam of .NET errors and disabling "auto start with Windows" seems to have fixed it: now I don't get them even when I Iet DCS auto-launch SSA: log.log Thx for the log, I spotted an issue there But unrelated to your issue 1 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
Avenger31 Posted February 12, 2021 Posted February 12, 2021 @f4l0any chance to make simshaker profile for Hercules mod by Anubis and new version of A-4? thanks in advance Asus TUF RTX 3080 10g GAMING; Intel i9 10900K; Asus B460 TUF GAMING PLUS; 2x32GB DDR4 3200Mhz HyperX Predator RGB; SSD 1TB Samsung EVO Plus
nobuttons Posted February 12, 2021 Posted February 12, 2021 On 2/8/2021 at 9:52 PM, f4l0 said: On 2/8/2021 at 8:28 AM, nobuttons said: Ok, I just borrowed a Jet Seat from a friend and am eager to try it. I hooked it up and the self test for the Shaker, and SSA both work! It seems to get support for the F-14 I need a beta build though? Where can I download that, and I need any special config files too? Thanks in advance! https://1drv.ms/u/s!AldPAmClTeGqgQlC2IVQGgGkRXqf?e=cW0R9X Works now, thanks! SYS : RYZEN 9 5950X + Crosshair VIII Hero + RTX 3090 FE 32GB + TridentZ NEO 32GB 3600MHz + FireCuda 520 1TB VR : Pimax 8KX : DCS 1.0, VR, Steam 100% (3148x3160), FOV 120 degrees || Quest2 || Index || Reverb G2 SIM : DCS || Star Wars Squadrons || Rise of Flight || IL2 Battle of Stalingrad || Elite Dangerous || Star Citizen DCS: Textures & Terrain High, Water & Vis Medium, Heat Blur Low, Shadows Medium, MSAA 2x, DoF OFF, Lens Flare Only, Motion Blur Off, SSAA & SSLR Off, Clutter 170, Trees 66%, Smoke 0, Anisotropic 2x, Terrain Shadows Flat, Cockpit Global Illumination On PIT : VKB Gunfighter base + VKB F14 grip || VKB Kosima grip + Virpl TC50 CM3 throttle + Logitch G pedals + Pimax Leap Motion hand tracking + SimShaker feedback
BMGZ06 Posted February 12, 2021 Posted February 12, 2021 (edited) I am running the 2.1.7 beta aviators and Sound module 2.26 and I noticed that some effects like wing fold in the F18 do not always work. I have to check and uncheck the box and sometimes restart sound module and aviators software for it to start working again. Then it will just randomly stop working. Other effects always work like gear and buffet, AB and fuel probe. Edited February 12, 2021 by BMGZ06 System Specs: 13900K, Strix Z790 Gaming E, MSI 4090 Sprim Liquid X OC'd, 64gb Gskill Trident Z DDR5, Samsung 980 PRO M.2 SSD,. Winwing throttle, Winwing panels/MIPs and VKB GF3/MCGU stick, MFG Crosswind V2, HP REVERB G2.
fUnk3mUnk3 Posted February 13, 2021 Posted February 13, 2021 (edited) HI I am running "SimShaker Sound Module Setup v 2.26" and "SimShaker for Aviators Installer v2.2.0" and when I try open "SimShaker Sound Module" by clicking on the desktop shortcut nothing happens it aslo does not open when DCS s running. I have tried multiple times uninstalling the programs and reinstalling but nothing seems to work. Things went wrong after an update of the software. What is the best way to do a complete uninstall and re-install as I see there is also old remanence of files left after uninstalling through "Programs and Features". Thanks in advance for any help. Windows startup still showing "Simshaker for Aviators beta" after uninstall. Edited February 13, 2021 by fUnk3mUnk3
fUnk3mUnk3 Posted February 13, 2021 Posted February 13, 2021 45 minutes ago, fUnk3mUnk3 said: HI I am running "SimShaker Sound Module Setup v 2.26" and "SimShaker for Aviators Installer v2.2.0" and when I try open "SimShaker Sound Module" by clicking on the desktop shortcut nothing happens it aslo does not open when DCS s running. I have tried multiple times uninstalling the programs and reinstalling but nothing seems to work. Things went wrong after an update of the software. What is the best way to do a complete uninstall and re-install as I see there is also old remanence of files left after uninstalling through "Programs and Features". Thanks in advance for any help. Windows startup still showing "Simshaker for Aviators beta" after uninstall. Just FYI an older version of SSM works. "SimShaker Sound Module Setup v 2.22" 1
adrianstealth Posted February 13, 2021 Posted February 13, 2021 hi andre I've use sim shaker for some time with DCS its brill I have new PC and wondered if it also works with msfs2020 ? also I cant find my code to activate sim shaker when I come to installing it on new PC
ChrisCo Posted February 14, 2021 Posted February 14, 2021 I am trying to activate Simshaker Sound but it says store is currently down. Is this correct?
f4l0 Posted February 14, 2021 Author Posted February 14, 2021 (edited) 14 hours ago, adrianstealth said: hi andre I've use sim shaker for some time with DCS its brill I have new PC and wondered if it also works with msfs2020 ? also I cant find my code to activate sim shaker when I come to installing it on new PC MSFS2020 is supported in SSA. 28 minutes ago, ChrisCo said: I am trying to activate Simshaker Sound but it says store is currently down. Is this correct? This is the thread for Simshaker for Aviators and not the Sound Module please contact @=Andre=or use the correct thread... Edited February 14, 2021 by f4l0 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
qvdg Posted February 14, 2021 Posted February 14, 2021 (edited) Hi, Looking forward to an update to cover the new A4C v2.0. It now shakes, rattles and thumps it will be great to have a F14 like simshaker experience. In any case I think SSA is an excellent product and I really can't fly without it (using Realteus forcefeell -also excellent). Keep up the great work (happy to donate to help the A4 roadmap). Cheers Edited February 14, 2021 by qvdg
f4l0 Posted February 15, 2021 Author Posted February 15, 2021 I just released a new beta (2.2.1) which should fix the A4C. So please test it and provide feedback... 1 f4l0 Developer of Simshaker for Aviators Feel the brrrrttt: [Official] SimShaker for Aviators Forums thread at ED forums SimShaker for Aviators (simshaker-for-aviators.github.io)
qvdg Posted February 15, 2021 Posted February 15, 2021 Wow that was quick ! Will try tonight. Many thanks Cheers
Avenger31 Posted February 15, 2021 Posted February 15, 2021 (edited) 16 hours ago, f4l0 said: I just released a new beta (2.2.1) which should fix the A4C. So please test it and provide feedback... I didnt get any answer regarding Hercules mod? Any time or never? I know you @f4l0 are bussy even with regular dcs modules but i asume if a4 is gatting attention as a community mod than herc should too (on my planet of apes) anyway thanks for your great work! Edited February 15, 2021 by Avenger31 Asus TUF RTX 3080 10g GAMING; Intel i9 10900K; Asus B460 TUF GAMING PLUS; 2x32GB DDR4 3200Mhz HyperX Predator RGB; SSD 1TB Samsung EVO Plus
qvdg Posted February 15, 2021 Posted February 15, 2021 Just had quick A4 v2.0 launch and trap on super carrier, launch ,flaps ,spoilers, hook , touchdown all feel great. I need to check the shudders at high AOA suspect there is a small delay between when you start to hear the shake and feel them but only first impression. In any case many thanks this is fantastic ! cheers
Recommended Posts