Bucic Posted April 25, 2010 Posted April 25, 2010 The modification still didn't feel completely linear to me and now I know why 1 F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
JGr124_Romer50 Posted May 3, 2010 Posted May 3, 2010 All this old. Not linearity of the response of mechanics not eliminates. The iron mechanics on bearings, this advance for yours Х52. All is very simple. photo - http://www.sukhoi.ru/forum/showthread.php?t=61135&page=3 Fürchte dich von der Katzen JGr124 "Katze"
igorry Posted May 25, 2010 Posted May 25, 2010 Would like to ask those who have mod their x52pro. After using it for some time, it is still worth doing the mod? Does it give you the precision you require? Any cons about the mod? Any pros? I am still deciding whether to attempt the mod. BTW where can you download the precision tester? igorry
Bucic Posted May 25, 2010 Posted May 25, 2010 (edited) It is worth it any time. Your X52 (X52 Pro) will not get its characteristic more linear with age :D Yes, precision is improved significantly. Both in terms of linearity (more predictable aircraft response) and removal of sensor dead zone. The pros have been presented. The cons - maybe you loose your warranty? No more cons. Plus if you go for the glue only solution (some type of elastic glue) you will be able to restore your X52 to the original state with no problems. Joystick tester and other tools Edited May 25, 2010 by Bucic F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
astrospud Posted July 18, 2010 Posted July 18, 2010 Curious. Just did the mod on my 52 Pro and the pitch axis is inverted. Could this be due to the polarity being arse-about? It's no big deal. I just inverted the channels in game. Just curious about it. Any one else had this? Rectum non bustus
m0jo Posted July 18, 2010 Posted July 18, 2010 Curious. Just did the mod on my 52 Pro and the pitch axis is inverted. Could this be due to the polarity being arse-about? Reverse the magnet (polarity / North-South) on the pitch axis but don't touch to the polarity of the wiring, the hall effect sensors is not built to be wired incorrectly.
Bucic Posted July 18, 2010 Posted July 18, 2010 Curious. Just did the mod on my 52 Pro and the pitch axis is inverted. Could this be due to the polarity being arse-about? It's no big deal. I just inverted the channels in game. Just curious about it. Any one else had this? :music_whistling: I had a problem of inverted X axis so I had to flip the magnets. Also I had to delete calibration information from the registry F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
astrospud Posted July 18, 2010 Posted July 18, 2010 Dang! A case on not reading the whole thread....sorry. :) Rectum non bustus
Bucic Posted July 19, 2010 Posted July 19, 2010 No problemo! :) F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
Bucic Posted November 7, 2010 Posted November 7, 2010 I hope it will not be taken as hijacking the topic - an attempt on additional modding. I wouldn't shout about that if it succeeded but it didn't and so I give you a heads-up F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
KLR Rico Posted February 14, 2012 Posted February 14, 2012 I finally got around to doing the magnet and spring mods... I used this method: http://www.overclock.net/t/541354/fixed-the-crapness-of-the-x52 And holy crap, let me tell you what... it made a WORLD of difference. The stick is now virtually pressure sensitive. Right after buttoning the stick back together I jumped into an instant action mission and IMMEDIATELY noticed a huge difference when I did a gun run on the trucks. Like I said, the stick is nearly pressure sensitive now; making fine corrections to the flight path is a thousand times better than before. If you haven't done this mod, do it today!! Now, I think there's a tanker out there somewhere I have to go rendezvous with. :joystick: i5-4670K@4.5GHz / 16 GB RAM / SSD / GTX1080 Rift CV1 / G-seat / modded FFB HOTAS
mortdth Posted June 8, 2014 Posted June 8, 2014 Response to the physical shift decreased. 75% = 100% Sorry for necromancing this post but I need some advice from people who did the magnet mod. I've done it to my new X52 Pro in a way similar to the OP's. I've put those two original magnets on a 1mm metal washer (wiki says that's the proper english word for the metal ring you put under the nut) and used blue tack to attach this to the sprocket shape plastic part. The distance from the magnet to the sensor is roughly 2mm. In result I'm able to make circular traces in JoyTester2 but the joystick is now supper sensitive. JoyTester shows that the 3/4 of the physical stick shift translates into 100% software response. That's not really the way it should be because I loose the resolution of movement. What should I change to address this issues? Should I increase the distance between the magnets and the sensor? Use one magnet? Maybe the washer is to be blamed? I've ordered some different magnets, so I'll see if this helps, but right now I'm really sorry I went on with this mod and have voided my warranty. Thanks for any help
Pilotasso Posted June 8, 2014 Author Posted June 8, 2014 Maybe you should somehow tweak the distance between the sensor and the magnet. BTW my X52 is ancient history, last time I used it was just a pile of squeaking plastic :) .
Bucic Posted June 8, 2014 Posted June 8, 2014 (edited) I'd also check whether autocalibration works. Normally it should perform it every time you restart your computer. If not, removing the* registry key may be required. *see http://forums.eagle.ru/showthread.php?p=884966#post884966 Edited June 8, 2014 by Bucic F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
mortdth Posted June 10, 2014 Posted June 10, 2014 (edited) I'd also check whether autocalibration works. Normally it should perform it every time you restart your computer. If not, removing the* registry key may be required. Thanks for the tip. I've deleted those reg keys, the os has recreated them and that seems to help a bit. I can now draw circles in Joytester with more ease and confidence. So it's mandatory to reset the calibration data after the magnet mod. There's still room for improvement dough, because the software courser reaches 100% when I still have some space to move the stick. It's like 80-85% to 100% now. I'll try to see if different magnet sizes influence the resolution. Jeszcze raz serdeczne dzięki Bucic. Don't you just hate when you have to tweak everything you buy? Especially stuff thats a bit expensive. Edited June 10, 2014 by mortdth
Bucic Posted June 10, 2014 Posted June 10, 2014 (edited) There's still room for improvement dough, because the software courser reaches 100% when I still have some space to move the stick. It's like 80-85% to 100% now. I'll try to see if different magnet sizes influence the resolution. First try what Pilotasso has suggested. Don't you just hate when you have to tweak everything you buy? Especially stuff thats a bit expensive. One day the pimps of wobble and plastic will answer for their atrocities :sly: Nie ma sprawy! BTW, which arrangement did you go for? Edited June 10, 2014 by Bucic F-5E simpit cockpit dimensions and flight controls Kill the Bloom - shader glow mod Poor audio Doppler effect in DCS [bug] Trees - huge performance hit especially up close
mortdth Posted June 11, 2014 Posted June 11, 2014 First try what Pilotasso has suggested. I will definitely do that as soon as I have some after market magnets. The package is waiting for me at the post office, so I'll probably get to it during the weekend. BTW, which arrangement did you go for? As in how did I attach the magnets? As I wrote in my original post I went after what Pilotasso had originally posted here. Got rid of the plastic magnet mount and put them beneath the hall sensor leaving a gap off aprox. 2-3 mm. I'll make some pics next time I open the stick. BTW. I found this ready made, print it yourself plastic part to increase the spring tension. http://www.thingiverse.com/thing:19253 Don't you just love the world of 3D printing? Now to find a place to print it :)
Recommended Posts