Capt Zeen F/A-18C Beta Helios Profile ! ! !

[RightStuff]

Always glad, knowing to have made someone happy. :)

 

To be honest:

I don't know if it's still neccessary or if there might be better values.

[ac5]

Always glad, knowing to have made someone happy. :)

 

To be honest:

I don't know if it's still neccessary or if there might be better values.

 

IT IS still necessary... Thanks again.

[Ressay]

Thanks Zeen for the great work, and thank you Right Stuff for the help ..

Well, I have a sort of a strange issue, I run Zeen profile now and after struggling with entering all of the numbers on the monitor configuration file, I run the profile and only the DDI's and the AMPCD are working, RWR UFC and IFEI are not, besides the fonts of the DDI and the AMPCD is very huge and unreadable ....

I followed your steps to change the font, but I don't see FA18 C folder under mods, the only one I have is under Saved Games/DCS/aircraft/FA-18C/Cockpit/Scripts, and it contains three folders, "IFEI, TEWS, and UFC"

 

Really don't know what to do I'm stuck

 

PS: I'm using Steam DCS

[Capt Zeen]

If , RWR UFC and IFEI are ot working probably is because you don't use the modified .ini files.

Check yout installation and confirm that those files are installed

[bamagrad20]

Hey Capt Zeen, it appears that the F/A-18C profile is not compatible with the latest Export file dated Aug 15, 2019 even though the table indicates it is. Can you confirm this?

 

I had to revert back to the Export file located in the F/A-18C download for my controls to work within the Helios profile.

[Ressay]

If , RWR UFC and IFEI are ot working probably is because you don't use the modified .ini files.

Check yout installation and confirm that those files are installed

 

Man I checked all of the files in the Profile but I see no .ini file, the only one located in the DCS config folder called imgui.ini

[ofcross]

Hey, does anyone knows how to add a black background to the exported MFD's?

[Fusedspine33]

I am having a go at making a custom layout for my pit build. I have completed the basic layout by editing in Captain Zeen’s 16:9. I am trying making a full physical front dash mask with homage to the F-18 layout.

 

Would it be possible to get the F-18C RWR added to the gauges library?

 

How can I edit the IFEI to not have the switch panel at the bottom so I can move the bezel lower? The image isn’t in the library?

 

Can anyone share how to make the HSI, VVI, ALT, and Airspeed Indicator active. I have tried to mimic everything related to these gauges from the original file but the don’t register when the game is running. If I load the original they work fine. If there is a video I haven’t found as a tutorial that explains how to activate these gauges, please point me in that direction. Thanks in advance for any help offered.

Edited September 15, 2019 by Fusedspine33

[Ares63]

Hi Capt, about L39 profile, when i flight two or more MIX after the first the L39 profile is no more working ... i have to stop and run again HELIOS.

This it doesn't happen with other profile like FA18 or P51

[gunterlund21]

running into an issue with this as well. Ive got the new A-10c profile working perfectly other than I cant pull up the UFC, but my F18 profile doesnt work now. I did a fresh install on it as well.

A question I have on this is in the F18 profile it says a-10 interface. There is no F-18 interface. Is this correct? Is this an issue?

 

New update the helios scripts in the F-18 zip are not compatible with the new a-10 scripts.

Edited October 13, 2019 by gunterlund21

[Capt Zeen]

running into an issue with this as well. Ive got the new A-10c profile working perfectly other than I cant pull up the UFC, but my F18 profile doesnt work now. I did a fresh install on it as well.

A question I have on this is in the F18 profile it says a-10 interface. There is no F-18 interface. Is this correct? Is this an issue?

 

New update the helios scripts in the F-18 zip are not compatible with the new a-10 scripts.

 

- The ufc button is side by side with the Top and CDU buttons. You can see the button? or just dont work?

 

- My F18 profile uses the A10C original helios interface, yes, thats correct.

 

- To be compatible with all the profiles, always use the latest export.lua i got on my site.

 

-Tonight i am going to revise the F18 profile, I made some chanegs on the A10C interface for my latest profile, and is posible that F18 as been afected.

[gunterlund21]

Thanks for the reply Zeen. I found the UFC button. They were right in front of my face. Also thanks for updating the F18 zip so they work with the A-10. Now we need Blufin to fix his Av-8 profile. :-)

[Capt Zeen]

Hello all.

I am preparing the update 3 for the F18 profile.

I fixed the 3 flir switches, and some others that has been afected for the new A10C interface ( yes, the f18 profile uses the a10C interface)

if you remember something that dont work, and want it to be fixed.... this is your moment!

[gunterlund21]

Zeen I dont think the Helmet mounted display knob works with a touch screen.

[Capt Zeen]

UPDATE 3

 

HELIOS 1.4.2019.1005 or above REQUIRED

 

Hello everyone!

I just released the Update 3 for the F18 helios profile.

I fixed the issues due to my last changes on the Helios interface, and all the switches updated by ED

And at last i rework some of the art of the profile, extending the 16:9 background version to fill the full screen and adding new art for all the switch types.

 

Hope you like it !

 

 

Here you got the change log:

 

-LIR switch

-LTD/R switch

-LST/NFLR switch

-AntiIce/Rain switch

-HMD bright rotator

-Fixed all the isses due to the last A10C interface changes (yes, that profile uses the A10C helios interface).

-Extended the cockpit art to full screen on the 16x9 aspect resolution

-Changed the art of all the switches for the actual F18C cockpit ones

-Added the new kneeboard panel with all the existing maps on DCS

-New export files organization

 

 

 

 

 

 

..

Edited November 10, 2019 by Capt Zeen

[Snacko]

That is beautiful!!

 

EDIT:

I am getting an error loading the profile in the Editor and Control Center. The Helios Log says this:

 

11/10/2019 2:08:46 PM - All - Helios Version 1.4.2018.1008
11/10/2019 2:08:58 PM - Error - Error loading profile F:\My Documents\Helios\Profiles\FA-18C_b_beta.hpf
Exception Source:System.Xml
Exception Message:Element 'Children' was not found. Line 297, position 20.
Stack Trace:
  at System.Xml.XmlReader.ReadStartElement(String name)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeMonitor(XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeMonitors(MonitorCollection destination, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeProfile(HeliosProfile profile, XmlReader xmlReader)
  at GadrocsWorkshop.Helios.ProfileManager.LoadProfile(String path, Dispatcher dispatcher)

 

I looked at line 297 char 20 and it looks fine. So, I don't know what may be wrong.

I am using Blue Fin's new version of Helios. Your older profile works fine.

 

EDIT 2:

I also tried to run it in Gadroc's old version of Helios with the same results.

 

I edited the profile using Notepad++ and deleted many controls to try and narrow down the problem. I removed all controls except one control that had <MouseWheel>True</MouseWheel>. I noticed that if I removed that line of code, that it would load. So, I removed all of those from the original profile and then I no longer got the error in the log because the Editor crashed on loading. The Event Viewer log is below. It may be something to do with the Mouse Wheel code. I don't know if any of this helps you... But I was curious to try and get it working.. :thumbup:

 

Application: Profile Editor.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.NullReferenceException
  at GadrocsWorkshop.Helios.BaseDeserializer.DispCreateNewObject(System.String, System.String)

Exception Info: System.Reflection.TargetInvocationException
  at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
  at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
  at System.Delegate.DynamicInvokeImpl(System.Object[])
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
  at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
  at System.Windows.Threading.DispatcherOperation.InvokeImpl()
  at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
  at MS.Internal.CulturePreservingExecutionContext.Run(MS.Internal.CulturePreservingExecutionContext, System.Threading.ContextCallback, System.Object)
  at System.Windows.Threading.DispatcherOperation.Invoke()
  at System.Windows.Threading.Dispatcher.ProcessQueue()
  at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
  at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
  at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
  at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
  at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
  at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
  at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
  at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
  at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
  at System.Windows.Application.RunDispatcher(System.Object)
  at System.Windows.Application.RunInternal(System.Windows.Window)
  at GadrocsWorkshop.Helios.ProfileEditor.App.Main()

Edited November 10, 2019 by Snacko

[Capt Zeen]

Thanks for testing.

Please be sure to use the Helios 1.4.2019.1005

 

Thanks

[sobe]

Snacko I have had no issue loading the profile. Don't know what that means.

However, I have another issue. I have used CZ's monitor config file for me without any changes as he has the same size monitors as I do. However, in today's update, the monitor config file has different numbers that do not load properly with the "b" version of the profile. So I went back to my prior monitor config file and all viewports loaded fine except for the RWR. The viewport numbers for the RWR based on my prior monitor config file should have worked, but now I get a blank RWR. I did change the lua file to the following:

 

shaderLineParamsUpdatable = true

shaderLineDefaultThickness = 0.6

shaderLineDefaultFuzziness = 0.3

shaderLineDrawAsWire = true

--shaderLineDrawAsWire = false

shaderLineUseSpecularPass = true

but no joy.

 

 

 

UPDATE For some reason I have the RWR viewport name in the monitor config file different from the name in the RWR lua file. When I conformed the names, the RWR appears but really impossible to read whether I use true or false for shaderLineDraw

 

 

Update to Update: I got the RWR to work and am able to see it on the second screen although a blank on the main screen.

 

shaderLineParamsUpdatable = true

shaderLineDefaultThickness = 0.06

shaderLineDefaultFuzziness = 0.03

--shaderLineDrawAsWire = true

shaderLineDrawAsWire = false

shaderLineUseSpecularPass = true

Edited November 11, 2019 by sobe
Update to update

[Snacko]

Thanks for testing.

Please be sure to use the Helios 1.4.2019.1005

 

Thanks

 

Ahh... that was it. I hadn't updated it for a while.

 

Cheers!:thumbup:

[BigLCZ]

Hi,

I have problem to run Helios 1.4.2019.1005, older version is ok, but when I install Helios 1.4.2019.1005 I can run it, both Editor and Control Center don´t start :(

 

Pleas can you help me?

 

BigL

[Snacko]

In the Helios install folder look for a file called something like heliosSettings.xml. Open in notepad and see if it looks ok. If it gets corrupted delete it and try again.

 

Sent from my Moto Z Play using Tapatalk

[Capt Zeen]

Hello all.

123nd.Lion from my discord channel found a bug in the profile, in the comm1 channel selector.

I really don't know from when this bug is over there, but well, thats happens!

I fixed and reuploaded the UPDATE 3 profile to MEGA.

Anyway, if you want to fix it by hand just drag and drop this two outputs on the comm1 rot:

 

 

Thanks a lot for all your feedbacks !

 

 

 

 

..

[sobe]

I am having a really weird problem. I use notepad ++ to modify lua files with no problem. Now, all of a sudden, when I change a lua file such as the monitor config file for the F18, the revised lua file no longer appears in the list of monitor files available in the game drop down, although it continues to appear the the list of files in file explorer. Why?

Edited November 13, 2019 by sobe

[sobe]

Here is an example of a lua file that does NOT appear in the game drop down, but does appear in Windows file explorer.

2_monitors-FA18C.lua

[Capt Zeen]

you miss a "="