Megalax Posted December 14, 2020 Share Posted December 14, 2020 I ran into a similar issue with my RCAF numbers. You have to use guides and split the file down the middle and into 11 slots for all the numbers plus the empty. Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything... Link to comment Share on other sites More sharing options...
JayRoo Posted December 17, 2020 Share Posted December 17, 2020 how do you split the document into 11? The file I copied from another skin maker was 2048 pixels tall. Divided by 11 = 186.18 which cannot be snapped to or made into a box to lay on the document as guides to then place the text on. Can I change the document size to a multiple of 11 or does it have to be 2048? When you see the guide boxes i did, they are 187px tall and thus the bottom digit is off by a bit. Link to comment Share on other sites More sharing options...
Megalax Posted December 17, 2020 Share Posted December 17, 2020 No no it has to be the same size as what you started with. I'd go with boxes of 186 px and start from there. Adjust the numbers that aren't quite lined up. Use a panel finder as a guide. Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything... Link to comment Share on other sites More sharing options...
JayRoo Posted December 18, 2020 Share Posted December 18, 2020 5 hours ago, Megalax said: No no it has to be the same size as what you started with. I'd go with boxes of 186 px and start from there. Adjust the numbers that aren't quite lined up. Use a panel finder as a guide. Ok. Thank you for the help. That got me on the right path. The new problem I discovered is that the numbers apparently have a width limit as well, which I discovered after skewing my numbers at the angle to match the real airplane's side numbers. You can see from the following reference picture that the numbers are leaning quite a bit (I reckon about 24 degrees): So in photoshop, I was able to get all the heights to match and fit 11 times. 186px was the better number and I ended up having 2px short which I placed in the blank spot. Here's a sample: Because of the skewing, I end up with numbers which get cropped because of the aforementioned width limit. I see now why other designers just end up making a bunch of individual airplanes with side numbers painted on and their description file containing a bunch of "empties".... ***Also, dont try to dirty up the numbers. I didn't think it thru that it would be repeated with common numbers and that it might not match the planes dirt layer.*** Link to comment Share on other sites More sharing options...
Glow Posted February 5, 2021 Share Posted February 5, 2021 (edited) You can use more than one file with numbers in one livery. Edited February 5, 2021 by Glow 1 Link to comment Share on other sites More sharing options...
RaTzo Posted March 27, 2021 Share Posted March 27, 2021 On 9/13/2020 at 6:34 AM, Bones1775 said: Help with cockpit texture Help with cockpit texture. i have edited the BuNo previously on other hornet liveries with no issues but with a new install of PS and the latest DDS plugin from NVidia i get this when the instrument lights are on. any help would be greatly appreciated. I am having the same problem. The background is completely transparent so I don't know how to fix this. I've tried looking at the channels and there is no information anywhere outside of the white paint. Is there some setting for export to DDS (using the Nvidia plugin) that I should know about? F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Megalax Posted March 27, 2021 Share Posted March 27, 2021 7 hours ago, RaTzo said: I am having the same problem. The background is completely transparent so I don't know how to fix this. I've tried looking at the channels and there is no information anywhere outside of the white paint. Is there some setting for export to DDS (using the Nvidia plugin) that I should know about? Its the alpha channel. It has to be completely black with only the text you want showing. Thats how they get the backlighting to work. 1 Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything... Link to comment Share on other sites More sharing options...
RaTzo Posted March 28, 2021 Share Posted March 28, 2021 15 hours ago, Megalax said: Its the alpha channel. It has to be completely black with only the text you want showing. Thats how they get the backlighting to work. Thanks! 1 F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
RaTzo Posted March 29, 2021 Share Posted March 29, 2021 On 3/27/2021 at 7:29 PM, Megalax said: Its the alpha channel. It has to be completely black with only the text you want showing. Thats how they get the backlighting to work. OK I'm not able to fix this for some reason. I'm a photographer and skilled in photoshop and I've skinned just about every aircraft in the game but I cannot get the Alpha channel correct. Can you tell me how to do this like I'm stupid (because apparently I am! lol)? I've tried using a layer mask on the mip0 layer and then adding my art in that location, I've tried creating a whole new Alpha channel, I've tried using a tga instead... always various things are wrong. F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
RaTzo Posted March 30, 2021 Share Posted March 30, 2021 (edited) On 3/27/2021 at 7:29 PM, Megalax said: Its the alpha channel. It has to be completely black with only the text you want showing. Thats how they get the backlighting to work. OK so here is the problem I'm having. Previously I was able to get a graphic to show but when I turned the lights up all the panels glowed like the person showed above. Now every time I save a the tex01 file and use it in game it looks like this. Here is your file from your 401 SQN livery unaltered but exported from photoshop and then used in DCS. Also what happens when I use the ED file from the F18 cockpit textures and cut out the BUNO section without generating a new alpha channel. Then what happens when I cut out the section, add new text and graphics and a new alpha channel. Able to tell what is going wrong? Edited March 30, 2021 by RaTzo F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Bones1775 Posted April 9, 2021 Share Posted April 9, 2021 On 3/30/2021 at 11:20 AM, RaTzo said: OK so here is the problem I'm having. Previously I was able to get a graphic to show but when I turned the lights up all the panels glowed like the person showed above. Now every time I save a the tex01 file and use it in game it looks like this. Here is your file from your 401 SQN livery unaltered but exported from photoshop and then used in DCS. Also what happens when I use the ED file from the F18 cockpit textures and cut out the BUNO section without generating a new alpha channel. Then what happens when I cut out the section, add new text and graphics and a new alpha channel. Able to tell what is going wrong? what plug in do you use, NVIDIA or Intell Link to comment Share on other sites More sharing options...
RaTzo Posted April 14, 2021 Share Posted April 14, 2021 On 4/9/2021 at 2:21 PM, Bones1775 said: what plug in do you use, NVIDIA or Intell nvidia Is there a setting I should know about? F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Bones1775 Posted April 16, 2021 Share Posted April 16, 2021 On 4/14/2021 at 11:21 AM, RaTzo said: nvidia Is there a setting I should know about? i switched to intel for this reason. couldn't figure out the settings Link to comment Share on other sites More sharing options...
RaTzo Posted April 17, 2021 Share Posted April 17, 2021 6 hours ago, Bones1775 said: i switched to intel for this reason. couldn't figure out the settings So are you saying if I use the Intel plugin that the problem will just go away? F-14B, A-10C,F-18C Lot 20, F-16C, UH-1H, SA342, Spitfire LF Mk IX, F-15C, Mig-29, Supercarrier, Nevada, Persian Gulf i9 9900k 5.0GHz, 32GB RAM, 1080Ti, Rift S, Warthog HOTAS, MFG Crosswind pedals, Dual Monitors 4K & 1080 Every Day, Someone Uses Cute Krispy Snacks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Bones1775 Posted April 20, 2021 Share Posted April 20, 2021 it did for me Link to comment Share on other sites More sharing options...
Tubesnake Posted July 15, 2021 Share Posted July 15, 2021 (edited) Text elements: Hi all! Does anyone know, if it is possible, to ie. have a pilot name in a .dds file, and use only that on an existing skin? Like an overlay, so you would only have to change the 'pilotname.dds' to customize a generic skin, used by a whole squadron. Edited July 15, 2021 by Tubesnake Link to comment Share on other sites More sharing options...
Megalax Posted July 15, 2021 Share Posted July 15, 2021 5 hours ago, Tubesnake said: Text elements: Hi all! Does anyone know, if it is possible, to ie. have a pilot name in a .dds file, and use only that on an existing skin? Like an overlay, so you would only have to change the 'pilotname.dds' to customize a generic skin, used by a whole squadron. Unfortunately no. The only way to do that is to edit the skin directly. Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything... Link to comment Share on other sites More sharing options...
Tubesnake Posted July 15, 2021 Share Posted July 15, 2021 2 hours ago, Megalax said: Unfortunately no. The only way to do that is to edit the skin directly. Thanx Megalax! Link to comment Share on other sites More sharing options...
Grey Hawk Posted December 15, 2021 Share Posted December 15, 2021 I have a problem when I editing the cockpit texture, the cockpit become white, and the picture 2 is how I edit the texture, how can I solve this problem ? Link to comment Share on other sites More sharing options...
AngryEchoSix Posted January 23, 2022 Share Posted January 23, 2022 That's because you aren't editing the texture file, you are editing the Roughmet, which determines what physical texture for the file to represent, i.e. glossiness, roughness/smoothness, or metallic sheen. The file(s) you'll want to play around with are "f18c_cpt-texXX" (XX being the associated numeric identifier). Link to comment Share on other sites More sharing options...
Grey Hawk Posted January 23, 2022 Share Posted January 23, 2022 10小时前,AngryEchoSix说: That's because you aren't editing the texture file, you are editing the Roughmet, which determines what physical texture for the file to represent, i.e. glossiness, roughness/smoothness, or metallic sheen. The file(s) you'll want to play around with are "f18c_cpt-texXX" (XX being the associated numeric identifier). This problem has been solved by myself before your reply.Thanks. Link to comment Share on other sites More sharing options...
AngryEchoSix Posted January 24, 2022 Share Posted January 24, 2022 On 1/23/2022 at 8:04 AM, Grey Hawk said: This problem has been solved by myself before your reply.Thanks. No worries....I guess I should have looked at the date of the post before replying. LOL Glad you got it sorted though! Link to comment Share on other sites More sharing options...
RayBurge Posted April 26, 2023 Share Posted April 26, 2023 I really hope the texture files get updated so they are a bit more realistic. this way the official ones can be downloaded and not require folks to do it for the community. the 2018 download is ok just the tails has more detail than the rest of the bird. 1 Link to comment Share on other sites More sharing options...
Crater_1 Posted December 21, 2023 Share Posted December 21, 2023 Hello fellow aviators, I'm trying to get back into skinning and noticed a huge change. Way back in the hood days the textures were labeled 1_DIF, but when I download the templates via ED they are only Texture1/2/3 ect... I use GIMP to skin my airframes and I cannot figure out which texture goes where. As you can see below, all the textures are in the incorrect locations. Is this a description.lua change, if so could I get some help please Thanks for the assist! Link to comment Share on other sites More sharing options...
Megalax Posted December 22, 2023 Share Posted December 22, 2023 14 hours ago, Crater_1 said: Hello fellow aviators, I'm trying to get back into skinning and noticed a huge change. Way back in the hood days the textures were labeled 1_DIF, but when I download the templates via ED they are only Texture1/2/3 ect... I use GIMP to skin my airframes and I cannot figure out which texture goes where. As you can see below, all the textures are in the incorrect locations. Is this a description.lua change, if so could I get some help please Thanks for the assist! I'm going to assume you're using the old C model template set that has 6 files. You have to use the Lot 20 template that only has 2 files. Megalax's Livery Studio My Liveries in the User Files I'll stick a maple leaf on anything... Link to comment Share on other sites More sharing options...
Recommended Posts