dave76 Posted August 15, 2019 Posted August 15, 2019 (edited) i still have to watch wags videos about flir and jdam , but meantime may i ask 1 which command do you use to lock a target with flir 2 how do you move flir fov cross ? (meaning up, down, left and right......should not be the TDC?) 3 how do you set laser code thank you much :) :) Edited August 15, 2019 by dave76
fitness88 Posted August 15, 2019 Posted August 15, 2019 1 I use enter as in locking an air to air 2 using the same button you use to slew your TDC over a radar tgt 3 ?
KittyVCAW-1 Posted August 15, 2019 Posted August 15, 2019 1. TDC depress 2. use TDC 3. use UFC 4. plz watch the video Nobody likes me because I'm unsafe.
ArcLite Posted August 15, 2019 Posted August 15, 2019 What Jonnie said, and if your TDC isn’t moving the FLIR cursor then you probably forgot to select that DDI with your sensor select switch. i9-9900K | 1080Ti 11GB | 32GB DDR4 | TM Warthog | Oculus Rift S | gametrix JetSeat F/A-18C | F-16C | F-14B | A-10C | F-86F | P-51D | P-47D | Spitfire | Fw 190A-8 | Bf 109K-4
dave76 Posted August 16, 2019 Author Posted August 16, 2019 (edited) 1. TDC depress 2. use TDC 3. use UFC 4. plz watch the video jonnie if i tdc depress (my point 1) it does not seem to me it locks target? :(...thank you again sure now i assigned sensor control switch to move flir fov and laser is on...... as soon as i can i watch tutorials :) Edited August 16, 2019 by dave76
fitness88 Posted August 16, 2019 Posted August 16, 2019 1. TDC depress 2. use TDC 3. use UFC 4. plz watch the video Do you have a specific link...lots of vids out there, thanks?
fagulha Posted August 16, 2019 Posted August 16, 2019 After the last update the "SCS Depress no longer controls Point/Area Track selection", how to enable Point Track? Thanks, F. About carrier ops: "The younger pilots are still quite capable of holding their heads forward against the forces. The older ones have been doing this too long and know better; sore necks make for poor sleep.' PC: 14th I7 14700KF 5.6ghz | 64GB RAM DDR5 5200 CL40 XMP | Gigabyte RTX 4080 Super Aero OC 16 GB RAM GDDR6X | Thermalright Notte 360 RGB | PSU Thermaltake Though Power GF A3 Snow 1050W ATX 3.0 PCIE 5.0 / 1 WD SN770 1TB M.2 NVME + 1 SSD M.2 2TB + 2x SSD SATA 500GB + 1 Samsung 990 PRO 4TB M.2 NVME (DCS only) | Valve Index| Andre´s JeatSeat.
kengou Posted August 16, 2019 Posted August 16, 2019 After the last update the "SCS Depress no longer controls Point/Area Track selection", how to enable Point Track? Thanks, F. Use Sensor Select switch in the direction of the DDI on which the TGP is open. That should toggle area and point track. Virpil WarBRD | Thrustmaster Hornet Grip | Foxx Mount | Thrustmaster TWCS Throttle | Logitech G Throttle Quadrant | VKB T-Rudder IV | TrackIR 5 AMD Ryzen 5 3600 | Nvidia GTX 1060 6GB | 32GB DDR4 3200 | SSD
dave76 Posted August 17, 2019 Author Posted August 17, 2019 (edited) well, scs right does not lock target for me........:(:(.... SORRY DOUBLE POST Edited August 17, 2019 by dave76
dave76 Posted August 17, 2019 Author Posted August 17, 2019 (edited) Thanks i watched the videos......scs right or where the pod is does not lock or point track target for me.......so don't really know :(:(......... WELL, NOW SEEMS TO BE WORKING Edited August 17, 2019 by dave76
Recommended Posts