Looney Posted March 4, 2020 Posted March 4, 2020 Looking to mod a FLCS stick and TQS at the end of march if all comes in. Will contact you later for replacement parts. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
dsx2b Posted April 2, 2020 Posted April 2, 2020 Interested Waiting for an email reply.:music_whistling:
Looney Posted April 28, 2020 Posted April 28, 2020 Got my stuff in, will connect everything to a Leobodnar board. Will that work with the contactless sensors? [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
Sokol1_br Posted April 28, 2020 Posted April 28, 2020 Bodnar board work with any contacless sensor that work in analog mode, just don't support in digital mode, e.g. TLE5010, VKB, VPC, Kommaroff.
Looney Posted April 29, 2020 Posted April 29, 2020 Thanks Sokol, I'll shoot Rel4y a PM. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
rel4y Posted June 2, 2020 Author Posted June 2, 2020 (edited) Sadly, there is no basis for operation at the moment. I can only ship within the EU, because the german mail service doesnt allow to ship outside the EU for some unknown reason. And then even that isnt working properly as one package to Sweden is stuck "due to Corona"... Absolute abysmal service! Deutsche Post tells me, but you can ship within Germany no problem. That is too kind, thank you! Edit: Resolved, world wide shipping is possible again! Edited April 28, 2021 by rel4y Cougar, CH and Saitek PnP hall sensor kits + shift registers: https://forums.eagle.ru/showthread.php?t=220916 Shapeways store for DIY flight simming equipment and repair: https://www.shapeways.com/shops/rel4y-diy-joystick-flight-simming
Rick50 Posted June 3, 2020 Posted June 3, 2020 Ok, well thank you for your efforts!! Do please let us all know when you are able to do business again, and able to ship to Canada / USA!
Looney Posted June 17, 2020 Posted June 17, 2020 If you're able to ship to the Netherlands please let me know and I'll order parts. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
stormrider Posted June 18, 2020 Posted June 18, 2020 CAM gimbal for CH's. Wow, tell me more about that. Banned by cunts.
Looney Posted July 3, 2020 Posted July 3, 2020 Any news regarding Relay's mods? [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
rel4y Posted July 25, 2020 Author Posted July 25, 2020 (edited) I have made ten CH sensors and three CH mainboards today. If anybody is interested send me an email over at mtwsims@tutamail.com :) As a reminder, this is how they look: Edited July 25, 2020 by rel4y Cougar, CH and Saitek PnP hall sensor kits + shift registers: https://forums.eagle.ru/showthread.php?t=220916 Shapeways store for DIY flight simming equipment and repair: https://www.shapeways.com/shops/rel4y-diy-joystick-flight-simming
Salt Peanuts Posted July 29, 2020 Posted July 29, 2020 My apologies if you’ve stated this elsewhere, but I assume you’re still restricted from shipping to US?
rel4y Posted July 31, 2020 Author Posted July 31, 2020 Yes, thats correct. I still cant ship to the US. Only via UPS which is like 25€. :( Cougar, CH and Saitek PnP hall sensor kits + shift registers: https://forums.eagle.ru/showthread.php?t=220916 Shapeways store for DIY flight simming equipment and repair: https://www.shapeways.com/shops/rel4y-diy-joystick-flight-simming
The Burrito Posted August 6, 2020 Posted August 6, 2020 Damn, still no international shipping. Unless you're saying that you can, but it's expensive? Would it be possible for you to direct us to what parts you used so we can order them ourselves, for those of us that can't order from you?
rel4y Posted August 6, 2020 Author Posted August 6, 2020 (edited) I cant direct you to any parts, because the sensors are completely hand made. The cases are my designs 3D SLS printed from Shapeways and the PCBs are also my designs hand assembled by me. Edited April 28, 2021 by rel4y Cougar, CH and Saitek PnP hall sensor kits + shift registers: https://forums.eagle.ru/showthread.php?t=220916 Shapeways store for DIY flight simming equipment and repair: https://www.shapeways.com/shops/rel4y-diy-joystick-flight-simming
Looney Posted August 24, 2020 Posted August 24, 2020 Mail sent. [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
IAF.Cheetah Posted August 30, 2020 Posted August 30, 2020 I have made ten CH sensors and three CH mainboards today. If anybody is interested send me an email over at mtwsims@tutamail.com :) As a reminder, this is how they look: I sent you an eMail. :joystick:
GPatricks Posted August 31, 2020 Posted August 31, 2020 (edited) I have made ten CH sensors and three CH mainboards today. If anybody is interested send me an email over at mtwsims@tutamail.com :) As a reminder, this is how they look: I can say moving to MTW's CH sensors/mainboards was the best thing i've done for this old gear. Super accurate, no more jitters/bounces, my Pro Throttle and Fighterstick reacts to the slightest pressure. Love it. Only caveat for any still using the CH Control Manager (which has long outlived its design without it going to open source) the mainboard installation will require it's removal once and for all. The sensors will work fine with it, but I had little use for it anyway. I (and MTW AFAIK) found no way for the new boards to communicate with it. I use JoyToKey for any programming I cant do in the sim itself, easy peasy.. Edited August 31, 2020 by GaryR GIGABYTE X870E AORUS Elite WIFI7, Thermaltake 1200w PS \AMD Ryzen 7 9800X3D - Corsair iCue Titan Liquid CPU cooler \ 64GB G.Skill Z5 DDR5 \ SBlasterX G6 \ 4TB NvMe M.2 Boot Drive \ Zotac GeForce RTX 4090 Trinity 24GB - Nvidia 576.02 drivers \ 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz Gsync \ Win11 Pro Ver. 24H2 - Build 26100.3775 \ TIR 5 \ Warthog HOTAS with VirPil stick base \ MFG V3 Pedals \ TM MFDs on 2 8" Lilliputs \ Simgears ICP \ Varjo XR-3 VR
IAF.Cheetah Posted August 31, 2020 Posted August 31, 2020 I'm already convinced.. since 2019 actually. Just waiting for this Covid19 situation to clear up so MTW can ship it to me.
ron533 Posted September 17, 2020 Posted September 17, 2020 Hi r4lay, Is it possible for you to map the new board to match the old CH throttle buttons ID's? I have many planes mapped and it would take me forever to re-map them again exactly as they were. If I had another CH throttle side by side - I could have compared them and re-map them... Thank you! Callsign SETUP
rel4y Posted September 17, 2020 Author Posted September 17, 2020 Hi r4lay, Is it possible for you to map the new board to match the old CH throttle buttons ID's? I have many planes mapped and it would take me forever to re-map them again exactly as they were. If I had another CH throttle side by side - I could have compared them and re-map them... Thank you! I am pretty sure the button IDs are mapped exactly as the original layout. GaryR (from this thread) did the mapping and sent me his config files. I cant really check myself since I only own (converted) gameport CH devices. Gary? Could you please comment on this? :joystick: Cougar, CH and Saitek PnP hall sensor kits + shift registers: https://forums.eagle.ru/showthread.php?t=220916 Shapeways store for DIY flight simming equipment and repair: https://www.shapeways.com/shops/rel4y-diy-joystick-flight-simming
GPatricks Posted September 17, 2020 Posted September 17, 2020 Hi r4lay, Is it possible for you to map the new board to match the old CH throttle buttons ID's? I have many planes mapped and it would take me forever to re-map them again exactly as they were. If I had another CH throttle side by side - I could have compared them and re-map them... Thank you! The mapping is done in MMJoy under the "Joystick buttons" tab. The pics are for my Pro Throttle. You simply hit the button and it lights up red, put that number next to the corresponding Button #, done. In your case simply copy my setup or I can send you the file to upload. Is the Fighterstick ok? GIGABYTE X870E AORUS Elite WIFI7, Thermaltake 1200w PS \AMD Ryzen 7 9800X3D - Corsair iCue Titan Liquid CPU cooler \ 64GB G.Skill Z5 DDR5 \ SBlasterX G6 \ 4TB NvMe M.2 Boot Drive \ Zotac GeForce RTX 4090 Trinity 24GB - Nvidia 576.02 drivers \ 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz Gsync \ Win11 Pro Ver. 24H2 - Build 26100.3775 \ TIR 5 \ Warthog HOTAS with VirPil stick base \ MFG V3 Pedals \ TM MFDs on 2 8" Lilliputs \ Simgears ICP \ Varjo XR-3 VR
ron533 Posted September 17, 2020 Posted September 17, 2020 (edited) If it's mapped like the original CH throttle (which I'm interseted in upgrading with r4lay. I'm using FF2 as a stick), then it should be pretty much 'plug n play'? or the upgraded throttle has to be re-mapped all together again anyway, since it's identified as a new device in windows and the old mappings won't fit Sorry if i'm not being very clear... Thanks for your replies! EDIT: from looking again at the pictures, seems you mapped it to look exactly like a USB CH throttle pro, with all the buttons?... then it should do the trick... :) cheers! Edited September 17, 2020 by ron533 Callsign SETUP
Recommended Posts