ramjet77 Posted March 28, 2020 Posted March 28, 2020 (edited) Could someone please clarify if the the Aim 120 Slave/Bore can be cycled on the HOTAS using the Cursor/Enable as written in the F16 EA guide, I find it works with the Aim 9 but not the Aim 120? From manual: Cursor/Enable (CURSOR/ENABLE) Control. This control is used for slewing of the fire control radar cursor or TGP/weapon video. Depressing the control changes the BORE/SLAVE option for the AIM-9 and AIM-120 I’m aware you need to press and hold in DGFT mode for Aim 9 and have tried both holding and single clicks in AA master for Aim 120 but no go. Thanks Edited March 28, 2020 by ramjet77
David OC Posted March 28, 2020 Posted March 28, 2020 (edited) My understanding is you just put the enemy aircraft in the big circle and maddog launch (Make sure there are no friendlies around). No slave available like the aim9x. Edit "Dodfight/ missile override" You can TMS up while using the HMD (Radar on with ellipse) Put this on the guy and TMS up again to lock. This is like Slaving the radar then launch the 120 You are limited to the radar elevation (less that aim9x) If no time maddog. Edited March 28, 2020 by David OC i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link
ramjet77 Posted March 28, 2020 Author Posted March 28, 2020 You can cycle Slave/Bore by pressing OSB on the MFD but not by the HOTAS switch which according to the manual you should be able to do. Still learning AA so wanting to know if it should /does work or whether I’m doing something wrong?
Svend_Dellepude Posted March 28, 2020 Posted March 28, 2020 not implemented yet. [sIGPIC][/sIGPIC] Win10 64, Asus Maximus VIII Formula, i5 6600K, Geforce 980 GTX Ti, 32 GB Ram, Samsung EVO SSD.
David OC Posted March 28, 2020 Posted March 28, 2020 (edited) You can cycle Slave/Bore by pressing OSB on the MFD but not by the HOTAS switch which according to the manual you should be able to do. Still learning AA so wanting to know if it should /does work or whether I’m doing something wrong? Bind "Dodfight/ missile override" Also bind "Enable switch - Depress" Hold this Enable switch down and the aim9x seeker will stay with your view. Put this on enemy hear sound and fire. I also have bound Right MFD OSB 7 on HOTAS to change to aim9 or 120s in Dogfight mode. See me do that here Aim9x slave Edited March 28, 2020 by David OC i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link
ramjet77 Posted March 28, 2020 Author Posted March 28, 2020 Thanks chaps, yes David OC my HOTAS is correctly bound and working correctly with Aim 9s so what Svend_Dellepude said makes sense that it is simply not implemented yet then. Yes I guess I could bind an OSB like you say, that would be a temp workaround. Thanks
Nealius Posted September 22, 2022 Posted September 22, 2022 Sorry to necro but this came up when searching for the Maddog switchology. Like OP mentioned, per the manual (and from other Viper sims) a press and hold of the cursor/enable should change 120s from SLAVE to BORE as long as cursor/enable is held down, but that doesn't seem to be working for me in AA master mode. The SMS still shows the missile in SLAVE. Am I missing a step, or is the cursor/enable function implemented and the visual SLAVE-->BORE change on the SMS isn't in yet?
_SteelFalcon_ Posted September 22, 2022 Posted September 22, 2022 10 minutes ago, Nealius said: Sorry to necro but this came up when searching for the Maddog switchology. Like OP mentioned, per the manual (and from other Viper sims) a press and hold of the cursor/enable should change 120s from SLAVE to BORE as long as cursor/enable is held down, but that doesn't seem to be working for me in AA master mode. The SMS still shows the missile in SLAVE. Am I missing a step, or is the cursor/enable function implemented and the visual SLAVE-->BORE change on the SMS isn't in yet? i think it's not fully there. it seems to work for aim9 but not for the 120 2
Recommended Posts