fmedges Posted April 29, 2020 Posted April 29, 2020 (edited) This once is a little hard to explain and I have a track file which I’ll attach once I get back to my desktop. The radar started to act strangely in the air. Went from tws to rws and tried to undesignate but that wasn’t working so I put the radar in standby. I landed and on the runway turned off nws and then back on and my radar started tracking targets while I was on the ground and it was in standby. I had the shoot cue rolling down the runway. I’ll attached a track file soon. The server I was n cuts off the last 10 minutes, but hopefully this will still provide some good data. The file was too big to attach so here is the link. https://www.dropbox.com/s/72sabzc6zhu1am2/Gunslinger%20Training%20Command-20200429-203400.trk?dl=0 Edited April 30, 2020 by fmedges [sIGPIC][/sIGPIC] Allied Air Command Website | Allied Air Command Discord
Focha Posted May 2, 2020 Posted May 2, 2020 +1 I have this issue too. It is like when I press NWS switch, radar in TWS will display a target memory. It will never leave unless I switch radar OFF and back on. But still, it persists if I press NWS. ASUS N552VX | i7-6700HQ @ 2.59GHz | 16 GB DDR3 | NVIDIA GF GTX 950M 4 Gb | 250 Gb SSD | 1 Tb HD SATA II Backup | TIR4 | Microsoft S. FF 2+X52 Throttle+Saitek Pedals | Win 10 64 bits
fmedges Posted May 20, 2020 Author Posted May 20, 2020 +1 I have this issue too. It is like when I press NWS switch, radar in TWS will display a target memory. It will never leave unless I switch radar OFF and back on. But still, it persists if I press NWS. Exactly this. This is still a problem see attached photos. [sIGPIC][/sIGPIC] Allied Air Command Website | Allied Air Command Discord
Subferro Posted May 20, 2020 Posted May 20, 2020 I think I’ve had the same issue. I don’t get it all the time, but have had it consistently on the Dire Straits mission. As soon as I pull up TWS it locks a memory target no where near my scan zone. Reset doesn’t clear it. Haven’t tried turning the radar off and back on
Napa Posted May 29, 2020 Posted May 29, 2020 F-18 Radar turns ON after landing on SC Not sure if this was already reported and if this is a SC bug or an F-18 bug, but a few seconds after I land on SC the radar locks on a target and it stays locked even if I turn it off. Track file too large to attach. So I uploaded on dropbox. Link here: https://www.dropbox.com/s/w0qfq13wm7s03x1/F-18C_Intercept_PG.trk?dl=0 Intel i7 12700k / Corsair H150i Elite Capellix / Asus TUF Z690 Wifi D4 / Corsair Dominator 32GB 3200Mhz / Corsair HW1000W / 1x Samsung SSD 970 Evo Plus 500Gb + 1 Corsair MP600 1TB / ASUS ROG Strix RTX 3080 OC V2 / Fractal Design Meshify 2 / HOTAS Warthog / TFRP Rudder / TrackIR 5 / Dell U2515h 25" Monitor 1440p
Gianky Posted May 29, 2020 Posted May 29, 2020 It did that even before SC, once landed, after folding the wings when I pressed NWS to have hi gain, it would lock on a target. You have to press the reset OSB on the radar page to drop the contact, I hope they'll fix this thing soon.
pimp Posted May 29, 2020 Posted May 29, 2020 Yeah this happened to me many times before the SC as well after landing. Even happened on land AB's too. i9 14900k @5.6GHz NZXT Kraken |Asus ROG Strix Z790 A-Gaming | Samsung NVMe m.2 990 Pro 2TB | 64GB DDR5 6400MHz EVGA RTX 3090 FTW3 Ultra | PiMAX CRYSTAL LIGHT | HOTAS Warthog | Saitek Flight Pedals
fmedges Posted May 29, 2020 Author Posted May 29, 2020 All of these threads can be merged https://forums.eagle.ru/showthread.php?t=271739 https://forums.eagle.ru/showthread.php?t=274638 [sIGPIC][/sIGPIC] Allied Air Command Website | Allied Air Command Discord
Napa Posted June 1, 2020 Posted June 1, 2020 So funny that they labeled this thread with a [NEED TRACK REPLAY] even though I have provided one on my post above. Intel i7 12700k / Corsair H150i Elite Capellix / Asus TUF Z690 Wifi D4 / Corsair Dominator 32GB 3200Mhz / Corsair HW1000W / 1x Samsung SSD 970 Evo Plus 500Gb + 1 Corsair MP600 1TB / ASUS ROG Strix RTX 3080 OC V2 / Fractal Design Meshify 2 / HOTAS Warthog / TFRP Rudder / TrackIR 5 / Dell U2515h 25" Monitor 1440p
Gianky Posted June 1, 2020 Posted June 1, 2020 So funny that they labeled this thread with a [NEED TRACK REPLAY] even though I have provided one on my post above. Even fmedges provided one. Since both of you said that the track was too big to attach on the forum, I think they need a new one because big tracks in DCS always get corrupted and don't show what actually happened. We need to provide a short track, maybe from a premade mission with just a straight in landing, so that the track doesn't (hopefully) get corrupted.
Recommended Posts