laertesson Posted June 22, 2020 Posted June 22, 2020 I would love to hear the engine buzzsaw on takeoff and the spool down sound, it's been a while since I read they may be getting updated.
Dunx Posted June 23, 2020 Posted June 23, 2020 There are some new sounds in the works. Check the Razbam bug tracker web site. ROG Z690 Hero ● i9-12900K 5.5GHz ● Giggy RTX 3090 OC ● 32GB 4800MHz ● Firecuda M.2s ● Reverb G2 ● Win11Pro //// A10CII ● AH64D ● AJS37 ● AV8BNA ● C101 ● CEII ● F16C ● F5EII ● F86F ● FA18C ● FC3 ● I16 ● KA50 ● M2000C ● MI8 ● P47D ● SA342 ● SPIT ● UH1H ● Y52
=DECOY= Posted June 23, 2020 Posted June 23, 2020 Hi, the spool down sounds have been added - WIP some new engine sounds but we have more to add, some from the community : ) Water cooled i9-9900K | Maximus Code XI MB | RTX3090 | 64GB | HP Reverb G2
laertesson Posted June 23, 2020 Author Posted June 23, 2020 Hi, the spool down sounds have been added - WIP some new engine sounds but we have more to add, some from the community : ) Thanks for the news decoy - and thanks even more for the GPWS sound updates. The harrier’s audio is nearing perfection.
=DECOY= Posted June 26, 2020 Posted June 26, 2020 Just an update. We have a sound engineer joining our team to work on the harrier sounds:) Water cooled i9-9900K | Maximus Code XI MB | RTX3090 | 64GB | HP Reverb G2
laertesson Posted June 30, 2020 Author Posted June 30, 2020 Just an update. We have a sound engineer joining our team to work on the harrier sounds:) Can't wait to hear his plans. Thanks for the extra update!
Captain Orso Posted June 30, 2020 Posted June 30, 2020 Can't wait to hear his plans. Thanks for the extra update! Can't wait to hear his work :) This sounds like the start of something good :D I'm such a child at heart :music_whistling: When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1
Ratfink Posted July 16, 2020 Posted July 16, 2020 Spool down sound added! CORSAIR 5000D AIRFLOW Mid Tower | AMD RYZEN 7 9800X3D | G.Skill Trident Z5 Neo EXPO RGB 64GB (2x32GB) DDR5 PC5-48000C30 6000MHz | ASUS ROG X870E-E GAMING WIFI | Gigabyte RTX5080 Gaming OC 16GB | 4TB Lexar NM790 M.2 PCIe 4.0 | Seasonic Prime TX-1000 1000W 80 Plus Titanium Modular Power Supply | Lian Li Galahad II Trinity AIO 360mm | Meta Quest Pro | TM HOTAS Warthog | Saitek Combat Rudder Pedals | Win 11 Home | Asus PG348Q 34" 3440x1440 Monitor | Bose Companion 3 2.1 Sound
Elof Posted July 16, 2020 Posted July 16, 2020 New sound just killed module for me. High pitched whine that will send me deaf...horrible
laertesson Posted July 16, 2020 Author Posted July 16, 2020 (edited) New sound just killed module for me. High pitched whine that will send me deaf...horrible It seems like theyre trying to add the buzzsaw sound on mid RPM, but the fact that it persists through high RPM is not at all realistic and also sounds awkward. The old high RPM sound (when takeoff water is on full tilt) was much better, but I really appreciate them attempting to add the buzzsaw sounds. Once they are refined a bit this will absolutely be a worthwhile addition to the sound of the airplane. In real life, buzzsaw seems to only be audible at a very specific RPM range, and I don't think what's just been added is right. Maybe we can get an update from the new sound engineer if RAZBAM/Decoy is reading? Edited July 16, 2020 by laertesson
Shrike88 Posted July 18, 2020 Posted July 18, 2020 It seems like theyre trying to add the buzzsaw sound on mid RPM, but the fact that it persists through high RPM is not at all realistic and also sounds awkward. The old high RPM sound (when takeoff water is on full tilt) was much better, but I really appreciate them attempting to add the buzzsaw sounds. Once they are refined a bit this will absolutely be a worthwhile addition to the sound of the airplane. In real life, buzzsaw seems to only be audible at a very specific RPM range, and I don't think what's just been added is right. Maybe we can get an update from the new sound engineer if RAZBAM/Decoy is reading? +1 as an improvement would be welcome. Looking forward to the Fast idle solenoid As well
Thebaron45 Posted July 18, 2020 Posted July 18, 2020 The "buzzsaw" sound you're referring to has to do with the Inlet Guide Vanes opening and changing airflow into the HP compressor. Can hear it on this video I made many years ago. Do note. with a helmet on, this sound would be drastically reduced.
bkthunder Posted July 20, 2020 Posted July 20, 2020 (edited) So this seems to be just a sound effect, while the actual RPM still drops too slowly. Exactly what I warned about in other threads, when I was told not to worry, they will also rework the RPM behavior... sure. Nice "cosmetic" addition anyway, adds to the immersion. Edited July 20, 2020 by bkthunder spelling Windows 10 - Intel i7 7700K 4.2 Ghz (no OC) - Asus Strix GTX 1080 8Gb - 16GB DDR4 (3000 MHz) - SSD 500GB + WD Black FZEX 1TB 6Gb/s
laertesson Posted July 20, 2020 Author Posted July 20, 2020 The "buzzsaw" sound you're referring to has to do with the Inlet Guide Vanes opening and changing airflow into the HP compressor. Can hear it on this video I made many years ago. Do note. with a helmet on, this sound would be drastically reduced. Thanks for the video, that surely is the sound I'm talking about. It's a bit like the WIP sounds we're hearing now to me, just needs a bit of refinement.
Recommended Posts