Gman109 Posted September 25, 2020 Posted September 25, 2020 I can't find the thread I'd read here about USB hubs, so I'll just post and ask. What is the best USB hub that everyone uses/recommends for VR headsets and other controllers again? My D link ones I've used for a few years need replacement toute suite. Thanks in advance. Primary DCS System: AMD 9800x3d, MSI Tomahawk 870, 6TB m.2s (2x2t, 1x2tb), MSI Ventus 5080, Seasonic 1200 PSU, 64GB Gskill 6000mhz CL30. 32" Asus 4K OLED 240hz, 49"MSI OLDED Secondary System : 14600KF, z790 Tomahawk, 32GB Gskill 6000mhz CL32, Asus 4090, 2x2TB m.2. VR: Quest 3 for now. Virpil T50x2,T50CM2x2,Warbrd x2, VFX/Delta/Flankr/CM2/Alpha/Tm Hornet sticks, VKB GF3, Tm Warthog(many), Modded Cougar, VKB Pedals/MFG Pedals/Slaw Viper RX+109Cam Pedals/Virpil Pedals x2, Virpil T50+T50CM2+T50+T50CM3+VMAX Throttles/CH Fightersticksx2/CH Throttlesx2/CH peds, Quest 3. Virpil Rotor TCS Plus. All virpil grips, TM Grips, working on VKB GF Grips.
fitness88 Posted September 25, 2020 Posted September 25, 2020 (edited) I use a 4 input Orico with individual on/off blue light indicator buttons. I plug it into my 1000ma USB 3.x using my Rift, j-stick, throttle and multi-purpose controller...couldn't be happier! As it is not self-powered, you will need to use a powered USB port as mentioned. Very nice not to have to do plug-in/plug-out...simply press a button. Edited September 25, 2020 by fitness88
redcoat22 Posted September 25, 2020 Posted September 25, 2020 I had repeated issues with a 3.0 hub, but recently bought a 3.1 powered hub and all of the issues went away.
fitness88 Posted September 25, 2020 Posted September 25, 2020 I had repeated issues with a 3.0 hub, but recently bought a 3.1 powered hub and all of the issues went away. Was your USB port powered?
dburne Posted September 25, 2020 Posted September 25, 2020 I use a powered RSHTECH USB 3 Hub - 4 port - each port has individual on/off buttons. I plug my Rift S USB in it and when not in use just switch that port off. Powered meaning it has an A/C adapter to plug in. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|
Rogue Trooper Posted September 26, 2020 Posted September 26, 2020 buy the reverb G2, it takes care of its own power supply... as it should be. HP G2 Reverb (Needs upgrading), Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. set to OpenXR, but Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), DLSS setting is quality at 1.0. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC... Everything needs upgrading in this system!. Vaicom user and what a superb freebie it is! Virpil Mongoose T50M3 base & Mongoose CM2 Grip (not set for dead stick), Virpil TCS collective with counterbalance kit (woof woof). Virpil Apache Grip (OMG). MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound... goodbye VRS.
Gman109 Posted September 26, 2020 Author Posted September 26, 2020 buy the reverb G2, it takes care of its own power supply... as it should be. It's not just for the G2 (I have 2 pre ordered), I have typically 2 Virpil/VKB sticks per gaming station along with one of my Virpil throttles and pedals, on top of the usual kb/mouse/etc/etc things. Aurelius, no, I don't have any new PMs in my box, I"ll go check through some old ones, sometimes the youngster units get into my main game station and check things they aren't supposed to. Thanks! Primary DCS System: AMD 9800x3d, MSI Tomahawk 870, 6TB m.2s (2x2t, 1x2tb), MSI Ventus 5080, Seasonic 1200 PSU, 64GB Gskill 6000mhz CL30. 32" Asus 4K OLED 240hz, 49"MSI OLDED Secondary System : 14600KF, z790 Tomahawk, 32GB Gskill 6000mhz CL32, Asus 4090, 2x2TB m.2. VR: Quest 3 for now. Virpil T50x2,T50CM2x2,Warbrd x2, VFX/Delta/Flankr/CM2/Alpha/Tm Hornet sticks, VKB GF3, Tm Warthog(many), Modded Cougar, VKB Pedals/MFG Pedals/Slaw Viper RX+109Cam Pedals/Virpil Pedals x2, Virpil T50+T50CM2+T50+T50CM3+VMAX Throttles/CH Fightersticksx2/CH Throttlesx2/CH peds, Quest 3. Virpil Rotor TCS Plus. All virpil grips, TM Grips, working on VKB GF Grips.
wormeaten Posted September 27, 2020 Posted September 27, 2020 BTW guys G2 is USB 3.1 gen1. Have that in mind where you will plugged in your G2. You do not need to have type C on your MBO. HP including in box Type C to A connector. So just be sure your MBO got 3.1 gen1 USB. 3.2 gen2 will work as well but older standards could have issues.
stormrider Posted September 27, 2020 Posted September 27, 2020 Before you get an USB hub, check on your motherboard if you have any available USB port. If so, you can get a USB backplate connected directly to the motherboard. Banned by cunts.
.thumb.gif.b248e2f44794fc8307d17a24da00c566.gif)
Recommended Posts