Sn8ke Posted October 7, 2020 Posted October 7, 2020 (edited) -Laser codes set -LTD/R armed I select a static target with the TGP, sensor select right for Area Track mode, TDC depress to designate. Laser on, sensor select left to maverick display, uncage. The HUD indicates missile in range, the triangle is on target, however mav is crossed out and not locked. Never got a lock. I did some trouble shooting, and found it only works when I select and designate a target, sensor select left, uncage missile, sensor select right back to TGP display, fire laser. Missile then licks and i successfully fire. Is this the correct sequence? Edited November 19, 2020 by [ED]Obi Asus Prime Gaming Wifi7 // Intel 14900K @5.5GHz // 64Gb DDR5 6000MHz // 3090 RTX // 4TB Samsung NVME M.2
maxTRX Posted October 7, 2020 Posted October 7, 2020 It kinda makes sense. If you use your LTD/R to lase you want to be on the Tpod page, you may have to make corrections also... but, I really don't know:noexpression:
MarcT-NL Posted October 8, 2020 Posted October 8, 2020 Yeah, I found that too. It's a bug in my opinion. Have used many laser-mavericks, but since update I have this issue. Laser is firing, lasercodes are all the same, in A2Gmode, masterarm on, but mav is not firing. I can cage and uncage, mav wil find the laser again but not firing. :(
ArteSSmart Posted October 8, 2020 Posted October 8, 2020 Yeah, I found that too. It's a bug in my opinion. Have used many laser-mavericks, but since update I have this issue. Laser is firing, lasercodes are all the same, in A2Gmode, masterarm on, but mav is not firing. I can cage and uncage, mav wil find the laser again but not firing. :( + my problem too!!!!:helpsmilie: i5 9600k; rtx 2070super 8gb by "gygabite" gddr6; 32gb2(16x2dual) DDR4
BarTzi Posted October 9, 2020 Posted October 9, 2020 As a workaround , pickle once to get the pod to fire the laser, and pickle again to let the 65E off the rail.
Willie Nelson Posted October 11, 2020 Posted October 11, 2020 (edited) I am having this problem too, I seem to get it to work only when the sensor select goes back to the FLIR page after uncaging, only then will my Laser target designator lined up with the target when I pickle and a few seconds later the rocket will come off the rails nicely. Edited October 11, 2020 by Willie Nelson i7700k OC to 4.8GHz with Noctua NH-U14S (fan) with AORUS RTX2080ti 11GB Waterforce. 32GDDR, Warthog HOTAS and Saitek rudders. HP Reverb.
imacken Posted October 11, 2020 Posted October 11, 2020 As a workaround , pickle once to get the pod to fire the laser, and pickle again to let the 65E off the rail. Or just hold the pickle button down. I believe this is correct behaviour. Changed a while ago. Been discussed several times before. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
MarcT-NL Posted October 12, 2020 Posted October 12, 2020 Yeah, but that's just the bug. Pickle twice or hold the button doesn't make a difference. The mav just won't lock. The mav-trianle on the hud will move to the target designated when uncaged, but it just wont get a lock. That is.... most of the time. Sometimes it just locks and fires like normal, but that is rare. Can't figure out how to bypass this.
imacken Posted October 12, 2020 Posted October 12, 2020 Yeah, but that's just the bug. Pickle twice or hold the button doesn't make a difference. The mav just won't lock. The mav-trianle on the hud will move to the target designated when uncaged, but it just wont get a lock. That is.... most of the time. Sometimes it just locks and fires like normal, but that is rare. Can't figure out how to bypass this. The Mav does lock by pressing the pickle button. Are you sure you have the laser switched on? Does it show on the HUD as being armed? Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
Burner1111 Posted October 12, 2020 Posted October 12, 2020 I can shoot stationary targets (target x with TGP->Mav SOI->Mav uncage->pickle to fire the laser->pickle again to fire Mav. Works 85-95%. But it does not work with moving targets. I cannot get laser lock on target. TGP is following, but no laser and Mav, its always behind the target. I hate it. Intel Core i7 9700k, MSI MEG Z390 ACE, 2 x 16GB HyperX DDR4 Fury, RTX 2080Ti, Corsair PSU RM750, Samsung SSD 970 Evo Plus + SSD 860 EVO (DCS), NZXT CPU cooler Kraken X62, Fractal Design R6 black. Thrustmaster Hotas Warthog, Thrustmaster F-18 HOTAS, RealSimulator FSDB-R3 Lighting, Sim Gears F-16 ICP LT, 3x Thrustmaster MFD's, TrackIR5, VoiceAttack+Vaicom PRO, DCS UFC app in Samsung 10" tablet.
imacken Posted October 13, 2020 Posted October 13, 2020 I can shoot stationary targets (target x with TGP->Mav SOI->Mav uncage->pickle to fire the laser->pickle again to fire Mav. Works 85-95%. But it does not work with moving targets. I cannot get laser lock on target. TGP is following, but no laser and Mav, its always behind the target. I hate it. Are you sure you are doing TDC depress on the TGP. Just locking the moving target with point track isn't enough. The Mav will slave to it, but until you press TDC depress, it will not lock. I've attached a track to demonstrate. Hard to see, I know, but when looking at the target, the lock occurs after I do TDC depress.mav e moving target.trk Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
MarcT-NL Posted October 13, 2020 Posted October 13, 2020 The Mav does lock by pressing the pickle button. Are you sure you have the laser switched on? Does it show on the HUD as being armed? Yes. The HUD says ARMED or L/ARM or something. After I press the trigger it switches to flashing LTD/R. So laser is firing. This is bug is very easy to test. Just try to fire an AGM65-E. Don't you have this bug ?
imacken Posted October 13, 2020 Posted October 13, 2020 Yes. The HUD says ARMED or L/ARM or something. After I press the trigger it switches to flashing LTD/R. So laser is firing. This is bug is very easy to test. Just try to fire an AGM65-E. Don't you have this bug ? No, I don't. See my track in post above. Are you sure you have done TDC depress? It will track without doing that, but will not lock. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
Burner1111 Posted October 13, 2020 Posted October 13, 2020 Thanks imacken! I will take a look on this. I think I have tried the TDC depress on the TGP too but i will try once more. Will give feedback! Cheers! Intel Core i7 9700k, MSI MEG Z390 ACE, 2 x 16GB HyperX DDR4 Fury, RTX 2080Ti, Corsair PSU RM750, Samsung SSD 970 Evo Plus + SSD 860 EVO (DCS), NZXT CPU cooler Kraken X62, Fractal Design R6 black. Thrustmaster Hotas Warthog, Thrustmaster F-18 HOTAS, RealSimulator FSDB-R3 Lighting, Sim Gears F-16 ICP LT, 3x Thrustmaster MFD's, TrackIR5, VoiceAttack+Vaicom PRO, DCS UFC app in Samsung 10" tablet.
Burner1111 Posted October 13, 2020 Posted October 13, 2020 (edited) Are you sure you are doing TDC depress on the TGP. Just locking the moving target with point track isn't enough. The Mav will slave to it, but until you press TDC depress, it will not lock. I've attached a track to demonstrate. Hard to see, I know, but when looking at the target, the lock occurs after I do TDC depress. You were right imacken. I was missing or not correctly using the TDC depress in E deployment. Your track helped, it was very easy to follow and recognize the issue!! Thanks, much appreciated your help! Now I'm back in business! :) Edited October 13, 2020 by Burner1111 Intel Core i7 9700k, MSI MEG Z390 ACE, 2 x 16GB HyperX DDR4 Fury, RTX 2080Ti, Corsair PSU RM750, Samsung SSD 970 Evo Plus + SSD 860 EVO (DCS), NZXT CPU cooler Kraken X62, Fractal Design R6 black. Thrustmaster Hotas Warthog, Thrustmaster F-18 HOTAS, RealSimulator FSDB-R3 Lighting, Sim Gears F-16 ICP LT, 3x Thrustmaster MFD's, TrackIR5, VoiceAttack+Vaicom PRO, DCS UFC app in Samsung 10" tablet.
imacken Posted October 13, 2020 Posted October 13, 2020 You were right imacken. I was missing or not correctly using the TDC depress in E deployment. Your track helped, it was very easy to follow and recognize the issue!! Thanks, much appreciated your help! Now I'm back in business! :) Glad you got it sorted out! Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
MarcT-NL Posted October 16, 2020 Posted October 16, 2020 No, I don't.... Right ! I have done some more testing. I found that: 1] In single-player the locking works much better then in multi-player. So maybe it has something to do with connection or synchronisation or so. Although the bug still appears in single-player sometimes, it is really noticable in multi-player. (I use a cable-connection, not Wifi). 2] It seems that the first mav fires fine most of the time. It's not realy consistent, but in 99% it is the 2nd, 3rd and 4th mav that wont lock. To demonstratie what I am doing I made a recording I hope this helps.
imacken Posted October 16, 2020 Posted October 16, 2020 Right ! I have done some more testing. I found that: 1] In single-player the locking works much better then in multi-player. So maybe it has something to do with connection or synchronisation or so. Although the bug still appears in single-player sometimes, it is really noticable in multi-player. (I use a cable-connection, not Wifi). 2] It seems that the first mav fires fine most of the time. It's not realy consistent, but in 99% it is the 2nd, 3rd and 4th mav that wont lock. To demonstratie what I am doing I made a recording I hope this helps. Can you please post a track. So much easier to see what is going on. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
MarcT-NL Posted October 16, 2020 Posted October 16, 2020 Don't know.what a track is. I found a map called savedgames\dcs\tracks, but that's empty...
imacken Posted October 16, 2020 Posted October 16, 2020 At the end of a mission, one of the options is ‘save track’. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
MarcT-NL Posted October 17, 2020 Posted October 17, 2020 OK, done that. Problem is..... the mavericks worked fine !!!! Aaaaaahhhh. Well, allmost. I made a SinglePlayer track, in which you can see the 2nd MAV won't fire. I am so hoping now, that it was because of a bug and not that I did something wrong... The track is too big to attach apparently, so get it here: http://www.marctelkamp.nl/SP.trk
MarcT-NL Posted October 17, 2020 Posted October 17, 2020 OMG !!! So I just watched my own track, right ? First I watched it on DCS 2.5.6.54046. Then I watched it on the latest DCS 2.5.6.55960. If you watch it on the older DCS, the maverick locked fine ! If you watch it on the newest DCS, the maverick won't lock. The first mav will lock fine, but after that, I make an inverted dive towards the targets and try to fire the second mav. If you watch it on the older DCS, you will see that the maverick will lock fine, but I don't shoot. That is because it DIDNOT lock when I was recording it. In fact, I made again a movie where you can see how it went on the newest DCS. 1
imacken Posted October 17, 2020 Posted October 17, 2020 I’m away for a few days, but hopefully, someone else will have a look. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box
Predator-78 Posted October 18, 2020 Posted October 18, 2020 I also have a problem with the LST mode of the TGP, the maverick does not lock onto the target illuminated by an external laser source. CPU: 12th Gen Intel(R) Core(TM) i7-12700K 3.60 GHz - DDR4 64,0 GB - MSI RTX3080ti - Win 11 64bit
Bearfoot Posted October 18, 2020 Posted October 18, 2020 This has been marked and [CAN NOT REPRODUCE]. Unfortunately, it was all too easy to reproduce for me, and I cannot NOT reproduce it! I did not realize that this had been reported as a bug, and was asking if this was working as intended here: https://forums.eagle.ru/showthread.php?t=289156 As can be seen, it depends on map, version, and some other conditions.
Recommended Posts