Jump to content

Recommended Posts

Posted

My Brother uses the TMWH HOTAS, mapped to DCS defaults. I have been training him on the A-10CII, and he seems to have the hardest time with his DMS hat presses.

 

He swears up and down that he is pressing DMS left (to turn HMCS off/on), or DMS right to cycle through profiles, but he mostly gets DMS up or down.

 

Are the THWH hats switches 4 or 8 way? If so, is the a way to configure them to be 4 way only?

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | Quest 3 |  Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Posted
34 minutes ago, Sr. said:

My Brother uses the TMWH HOTAS, mapped to DCS defaults. I have been training him on the A-10CII, and he seems to have the hardest time with his DMS hat presses.

 

He swears up and down that he is pressing DMS left (to turn HMCS off/on), or DMS right to cycle through profiles, but he mostly gets DMS up or down.

 

Are the THWH hats switches 4 or 8 way? If so, is the a way to configure them to be 4 way only?


 

its a 4 way HAT switch, to turn on/ff HMCS it is a long press left, the only 8 way is the POV switch (H1)

Asus ROG IX | Intel i7-9700K | RTX 2080TI | G.SKILL 32GB DDR4 3200MHz RAM | Samsung 970 EVO 2TB M2 | LG 43” 4K Monitor | TrackiR | Stream Deck XL | Warthog HOTAS | Cougar MFDs x 3 | Saitek Rudder Pedals | Logitech G13| Corsair Virtuoso Wireless Headset |

Posted
46 minutes ago, Oilman100 said:


 

its a 4 way HAT switch, to turn on/ff HMCS it is a long press left, the only 8 way is the POV switch (H1)

 

I kinda figured it was... to be fair, he does have rather fat thumbs  🙂

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | Quest 3 |  Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Posted

Seems his issue is, it sounds like the switch/button itself may not be installed correctly.

 

Says instead of getting responses at 12/3/6/9 o'clock, they are closer to 2/5/8/11

 

pressing 3 or 9 left/right ... nothing

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | Quest 3 |  Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Posted

Go to controls and a10cII and check if the joy input shows up

i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | Orion 2 throttle base w/ Viper & Hornet grips| VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 2x TM MFDs & 1x WW DDI | 2x Bass shakers | SIMple SIMpit chair | WW TakeOff panel | Andre JetSeat | WW Hornet UFC | WW Viper ICP

FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle - Phantom - Mirage F1 - Afghanistan - Irak

Posted
2 hours ago, Ala12Rv-Tundra said:

Go to controls and a10cII and check if the joy input shows up

They do. Just not in the expected area of the button when pressed.

Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC  | Samsung 970 Evo 2TB NVME | Quest 3 |  Logitech X-56 throttle | VKB NXT Premium |  Win 11

"Any sufficiently advanced technology is indistinguishable from magic."

--Arthur C Clark

Posted (edited)

Red points are the area's to be pressed. So 12, 3, 6 and 9 o'clock. Otherwise you press 2 buttons at the same time. Check the event tester.

 

image.png

Edited by Lange_666

Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind pedals, TrackIR4, Rift-S, Elgato Streamdeck XL.

Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance!

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...