Jump to content

Recommended Posts

Posted

Yes got this working , few days ago .

Look at Slughead post i followed that .

However make sure you tick dX11 and openXR . and choose VR toolkit and some effects i left default ones . 

Home page will only show on flat screen not in VR remove headset to adjust effects . 

i used fake HDR as this cleans up the fog in DCS . 

Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit . No longer Supporting DCS . 

Posted
45 minutes ago, KoN said:

Yes got this working , few days ago .

Look at Slughead post i followed that .

However make sure you tick dX11 and openXR . and choose VR toolkit and some effects i left default ones . 

Home page will only show on flat screen not in VR remove headset to adjust effects . 

i used fake HDR as this cleans up the fog in DCS . 

The menu shows fine in the 2D window however there is zero change to the visuals in the HMD. What version of Varjo Base are you using?

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted

He is using a Pico Nero 3 according to his sig line

SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero
SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO

YOUTUBE CHANNEL: @speed-of-heat

1569924735_WildcardsBadgerFAASig.jpg.dbb8c2a337e37c2bfb12855f86d70fd5.jpg

Posted
4 minutes ago, speed-of-heat said:

He is using a Pico Nero 3 according to his sig line

Good spot, thanks!

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted
8 hours ago, zildac said:

The menu shows fine in the 2D window however there is zero change to the visuals in the HMD. What version of Varjo Base are you using?

Have you assigned a key bind for effects on and off .

I use scroll lock key .

And have you ticked the two add-on sysc. Next to home tab . This what is needed. 

Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit . No longer Supporting DCS . 

Posted (edited)
6 hours ago, KoN said:

Have you assigned a key bind for effects on and off .

I use scroll lock key .

And have you ticked the two add-on sysc. Next to home tab . This what is needed. 

Hi, you last point appears to be the issue. The add-on sync option does not appear to show, this was the case when I tried a few weeks back. Another Varjo use had the same issue.

Edited by zildac

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted (edited)
38 minutes ago, zildac said:

Hi, you last point appears to be the issue. The add-on sync option does not appear to show, this was the case when I tried a few weeks back. Another Varjo use had the same issue.

 

Ok do uninstall of reshade . 

And then do clean up of DCS and repair. Delete all files on clean up.

Reshade . 

Start dcs, close down once run . 

Reinstall reshade latest version. 

Tick dx11 and openxr 

Effects vrtoolkit and the top two default. 

Open home page add-on tab hopefully your get the two options to sys . 

First time I tried I didn't get two sys options , and reshade  didn't work in VR. 

That all I can say . 

Edited by KoN

Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit . No longer Supporting DCS . 

Posted
4 minutes ago, KoN said:

Ok do uninstall of reshade . 

And then do clean up of DCS and repair. Delete all files on clean up.

Reshade . 

Start dcs, close down once run . 

Reinstall reshade latest version. 

Tick dx11 and openxr 

Effects vrtoolkit and the top two default. 

Open home page add-on tab hopefully your get the two options to sys . 

First time I tried I didn't get two sys options , and reshare didn't work in VR. 

I'll have another try 👍

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted

all i can say is it doesn't work with Varjo... 

 

  • Like 1

SYSTEM SPECS: Hardware AMD 9800X3D, 64Gb RAM, 4090 FE, Virpil T50CM3 Throttle, WinWIng Orion 2 & F-16EX + MFG Crosswinds V2, Varjo Aero
SOFTWARE: Microsoft Windows 11, VoiceAttack & VAICOM PRO

YOUTUBE CHANNEL: @speed-of-heat

1569924735_WildcardsBadgerFAASig.jpg.dbb8c2a337e37c2bfb12855f86d70fd5.jpg

Posted
On 7/30/2024 at 8:44 PM, IR.Clutch said:

Ok, short guide

1. Install to MT folder image.png

2. Select DirectX and OpenXR and desired effects

3. Make sure to check these boxes.

image.png

That's it.

 

Do you get this in 2D . ? 

 

Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit . No longer Supporting DCS . 

Posted
12 minutes ago, KoN said:

Do you get this in 2D . ? 

 

Neither of those options are present in the 2D mirror, I’ve not fired it up in 2D, I suspect it is a Varjo specific issue.

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted

OK, so I still have the exact same problem as I did previously, only one of those checkboxes is availble, I have to assume this is a Varjo (Varjo Base issue)

null

image.png

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted
4 hours ago, zildac said:

Neither of those options are present in the 2D mirror, I’ve not fired it up in 2D, I suspect it is a Varjo specific issue.

I'm confused by your reply . You haven't fired it up in 2D ..??? 

2 hours ago, zildac said:

OK, so I still have the exact same problem as I did previously, only one of those checkboxes is availble, I have to assume this is a Varjo (Varjo Base issue)

null

image.png

Had the same thing i uninstalled reshade , then  did a clean and repair of DCS . removing any files that should not be there , then reinstalled reshade .I then got the two options . 

Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER -  XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 .

I'm a dot . Pico Nero 3 link VR . @ 4k

Win 11 Pro 64Bit . No longer Supporting DCS . 

Posted
1 hour ago, KoN said:

I'm confused by your reply . You haven't fired it up in 2D ..??? 

Had the same thing i uninstalled reshade , then  did a clean and repair of DCS . removing any files that should not be there , then reinstalled reshade .I then got the two options . 

I fired it up in 2D and the menu doesn't even open, I'm assuming this is because it is specifically looking to hook OpenXR.

In VR the menu opens in the 2D mirror, but I do not have the additional sync option. Clean and repair makes no difference. It is as far as I can see a Varjo issue.

 

 

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted

Hooking OpenXR with the Varjo seems to be a challenge.  You may want to try this ReShade Add-On (not shaders, but an add-on).  The author has a Varjo Aero.

 

  • Like 1
Posted
1 hour ago, Dunska said:

Hooking OpenXR with the Varjo seems to be a challenge.  You may want to try this ReShade Add-On (not shaders, but an add-on).  The author has a Varjo Aero.

 

Thanks, yes have seen it. Must get around to trying it out soon.

14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero

Posted (edited)

Hello, this mod will not allow you to apply reshade post processing on game display. This is an autonomous "addon", it can only do its own effects to game output, at least for the moment. It should work for all VR headsets, even if I tested it for Varjo only.

The "color" effects done by the mod are basic :

  • Color addition or multiplication on all components (for cockpit or external)
  • Color saturation (for cockpit or external)
  • Sharpen (for cockpit only)
  • Haze control (from 0 to 100%)
  • Deband for sky and sea

 

Edited by lefuneste01
  • Like 2

Intel i5 10400K @4.8 GHz, 3080ti, 32 GB RAM, Varjo Areo.

I spend my time making 3dmigoto VR mods for BoS and DCS instead of flying, see https://www.patreon.com/lefuneste

Posted
On 9/17/2024 at 2:02 AM, KoN said:

Yes got this working , few days ago .

Look at Slughead post i followed that .

However make sure you tick dX11 and openXR . and choose VR toolkit and some effects i left default ones . 

Home page will only show on flat screen not in VR remove headset to adjust effects . 

i used fake HDR as this cleans up the fog in DCS . 

One thing to be aware of with VRToolkit is that they have a number of preset files documented on their site. For those preset files we have found that you have to download their Zip file, open it up, and then copy the preset files to your "bin-mt\reshade-reshaders\Presets" directory (create this if it doesn't exist). Then within the ReShade config menu at the top beside the Preset dropdown click the folder icon to browser to those preset files, can then select the one you want, e.g. generic_filmic_vr++

AMD 7800x3D, 4080Super, 64Gb DDR5 RAM, 4Tb NVMe M.2, Quest 2

Posted
59 minutes ago, slughead said:

Вам нужно установить клавишу, чтобы включать и выключать его в настройках reshade. По умолчанию она не установлена.

I have installed the key, it only works in single missions, it does not work on the server.

Posted
1 hour ago, slughead said:

You need to set a key to toggle it on and off on the reshade settings. It’s not set by default.

I have one set and I'll see it on in the VR headset and screen but if I try to toggle it it won't turn on or off in the headset but will on screen.

Posted
18 minutes ago, GarrettJMorgan said:

I have one set and I'll see it on in the VR headset and screen but if I try to toggle it it won't turn on or off in the headset but will on screen.

That's how it works for me also, set it in the menu screen and leave it... I can't see any changes while in VR...

GIGABYTE X870E AORUS Elite WIFI7, Thermaltake 1200w PS \AMD Ryzen 7 9800X3D - Corsair iCue Titan Liquid CPU cooler \ 64GB G.Skill Z5 DDR5 \ SBlasterX G6 \ 4TB NvMe M.2 Boot Drive \ Zotac GeForce RTX 4090 Trinity 24GB - Nvidia 576.88 drivers \ 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz Gsync \ Win11 Pro Ver. 24H2 - Build 26100.4652 \ TIR 5 \ Warthog HOTAS  with VirPil stick base \ MFG V3 Pedals \ TM MFDs  on 2 8" Lilliputs \ Simgears ICP \ Varjo XR-3 VR

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...