tmansteve Posted June 25, 2022 Share Posted June 25, 2022 Using stable version latest update. Everything working fine until the last moment when she is just a little high and misses the wires to Bolter. All operations are fine. Tried three attempts then landed manually. Not sure if this is already being looked at or fixed for next update. 4 Link to comment Share on other sites More sharing options...
DoubleP99 Posted July 6, 2022 Share Posted July 6, 2022 (edited) Yep I notice the same thing, I did multiple case 3 landings with acls in different missions and it always overshoots the wires Edited July 6, 2022 by DoubleP99 Link to comment Share on other sites More sharing options...
IronMike Posted July 11, 2022 Share Posted July 11, 2022 Is this on a calm sea state/ low winds, or high winds/ high sea state? Currently the ACLS is not capable to compensate for a pitching deck when the 10 seconds light comes on as it should. This is something we have yet to find a solution for. If it happens on low sea state, this is clearly a bug though. Also, would you be so kind please and attach a short track? Our AP dev can then directly debug it - it would help a lot! Thank you! Please do not interact with Jester for the track, or it will break it. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
DSplayer Posted July 11, 2022 Share Posted July 11, 2022 When using the ACLS with the Case 1 Recovery instant action mission, it seems like the ACLS doesn't move your plane at all. I'd assume this is similar to the AP in general degraded when the latest OB patch released. ACLSF14Test1.trkACLSF14Test2.trk 1 -Tinkerer, Certified F-14 and AIM-54 Nut | Discord: @dsplayer Setup: i7-8700k, GTX 1080 Ti, 32GB 3066Mhz, Lots of Storage, Saitek/Logitech X56 HOTAS, TrackIR + TrackClipPro Modules: F-14, F/A-18, JF-17, F-16C, Mirage 2000C, FC3, F-5E, Mi-24P, AJS-37, AV-8B, A-10C II, AH-64D, MiG-21bis, F-86F, MiG-19P, P-51D, Mirage F1, L-39, C-101, SA342M, Ka-50 III, Supercarrier, F-15E Maps: Caucasus, Marianas, South Atlantic, Persian Gulf, Syria, Nevada Mods I've Made: F-14 Factory Clean Cockpit Mod | Modern F-14 Weapons Mod | Iranian F-14 Weapons Pack | F-14B Nozzle Percentage Mod + Label Fix | AIM-23 Hawk Mod for F-14 Link to comment Share on other sites More sharing options...
IronMike Posted July 12, 2022 Share Posted July 12, 2022 20 hours ago, DSplayer said: When using the ACLS with the Case 1 Recovery instant action mission, it seems like the ACLS doesn't move your plane at all. I'd assume this is similar to the AP in general degraded when the latest OB patch released. ACLSF14Test1.trk 838.82 kB · 0 downloads ACLSF14Test2.trk 722.33 kB · 0 downloads Could be. try setting a slightly higher deadzone and try again please. We hope to have a fix the coming patch. 1 Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
DarkHelmet Posted July 15, 2022 Share Posted July 15, 2022 On 7/12/2022 at 7:44 PM, IronMike said: try setting a slightly higher deadzone Confirmed! Changed from 0 to 2 for both x- and y-axis on my X56 and ACLS worked again. Cheers Dark Link to comment Share on other sites More sharing options...
Goodwin Posted July 28, 2022 Share Posted July 28, 2022 (edited) 06.07.2022 в 23:06, DoubleP99 сказал: Yep I notice the same thing, I did multiple case 3 landings with acls in different missions and it always overshoots the wires confirm. ACLS almost doesn't work. Autopilot activated but overshoot. 3 out of 4 landings will fly through the cable. and it is possible that 4 landing will hook the very last 4 cable. with a calm sea and zero wind Do you need a track? Or are you aware of the problem? Does your autopilot get on the cables as it should? dcs version openbeta 2.7.16.27869 Edited July 28, 2022 by Goodwin Link to comment Share on other sites More sharing options...
RustBelt Posted July 28, 2022 Share Posted July 28, 2022 Are you running SC or a real carrier? SC still thinks you’re a Hornet. Link to comment Share on other sites More sharing options...
near_blind Posted July 28, 2022 Share Posted July 28, 2022 The supercarrier thinks you're a hornet with regards to LSO calls and the meatball. The ACLS code for the F-14 is internal to the F-14's code and handled by Heatblur. Link to comment Share on other sites More sharing options...
RustBelt Posted July 28, 2022 Share Posted July 28, 2022 44 minutes ago, near_blind said: The supercarrier thinks you're a hornet with regards to LSO calls and the meatball. The ACLS code for the F-14 is internal to the F-14's code and handled by Heatblur. What you mean it isn't actually working like an actual ICLS at all? Link to comment Share on other sites More sharing options...
near_blind Posted July 28, 2022 Share Posted July 28, 2022 I don't believe I mentioned ICLS. 1 Link to comment Share on other sites More sharing options...
Goodwin Posted July 28, 2022 Share Posted July 28, 2022 @IronMike is there any chance that you will fix the accuracy of auto landing on an aircraft carrier for F-14? or do you need a track? Link to comment Share on other sites More sharing options...
IronMike Posted July 28, 2022 Share Posted July 28, 2022 1 hour ago, Goodwin said: @IronMike is there any chance that you will fix the accuracy of auto landing on an aircraft carrier for F-14? or do you need a track? if you have a short track that will surely help, thank you. Please remember to not use the Jester menu in the track. It also helps to engage ATT hold within 10 seconds of mission start, in order to prevent desync cause by inputs. Thanks a ton! And yes, ofc, if there is an inaccuracy, we intend on fixing it. Heatblur Simulations Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage. http://www.heatblur.com/ https://www.facebook.com/heatblur/ Link to comment Share on other sites More sharing options...
RustBelt Posted July 28, 2022 Share Posted July 28, 2022 (edited) 15 hours ago, near_blind said: I don't believe I mentioned ICLS. Isn’t the ACLS just autopilot coupling to ICLS? Which would need to be adjusted per-aircraft just like the IFLOLS? edit: Never mind, I didn’t know they were actually completely different systems, with ICLS being like ILS and ACLS being more like an automated feedback PAR approach. https://www.quora.com/What-is-the-difference-with-the-instrument-carrier-landing-system-and-the-automatic-carrier-landing-system Edited July 28, 2022 by RustBelt Link to comment Share on other sites More sharing options...
tmansteve Posted July 31, 2022 Author Share Posted July 31, 2022 (edited) Been away for a while and notice that a few others are having similar problems. Lets hope it settles down and starts to play ball. I might just get it on track and when I am about 2 miles out, land it manually. All my attempts have been fairly calm and also with 6 knots wind, always does the same thing. Edited July 31, 2022 by tmansteve Link to comment Share on other sites More sharing options...
muamshai Posted July 31, 2022 Share Posted July 31, 2022 (edited) Same in here. All parameters are in the line, calm weather and winds yet ACLS overshoots. Can anyone else provide a track to devs? I'll be away from home for a few days. Edited July 31, 2022 by muamshai This space is available for your advertisement Link to comment Share on other sites More sharing options...
Sideburns Posted August 2, 2022 Share Posted August 2, 2022 Same with the Forrestal, feels like it misses wire 4 by about 1-2m. 1 Ryzen 5800x@5Ghz | 96gb DDR4 3200Mhz | Asus Rx6800xt TUF OC | 500Gb OS SSD + 1TB Gaming SSD | Asus VG27AQ | Trackhat clip | VPC WarBRD base | Thrustmaster stick and throttle (Deltasim minijoystick mod). F14 | F16 | AJS37 | F5 | Av8b | FC3 | Mig21 | FW190D9 | Huey Been playing DCS from Flanker 2.0 to present Link to comment Share on other sites More sharing options...
Goodwin Posted August 12, 2022 Share Posted August 12, 2022 (edited) obviously everyone has a problem. why are developers still silent? one of the main F-14 mechanics does not work. The saddest thing is that on all tracks, when reviewing, my F-14 sits correctly. and when a person is piloting, then 14 misses 4 cables by 1-2 meters. @IronMike I can attach the track. but he is useless. on repeat in the track everything is ok. Edited August 12, 2022 by Goodwin 1 Link to comment Share on other sites More sharing options...
Goodwin Posted August 15, 2022 Share Posted August 15, 2022 (edited) not the most ideal approach to glide path. but for video it will do. https://youtu.be/QYNXUt_Uu2k + i attached 2 useless tracks. when i look at them, I get a different picture every time. sometimes in track 14 it even sits down. but unfortunately he does it only in a track in acls mode. f14_acl.trk f14_acl2.trk Edited August 15, 2022 by Goodwin Link to comment Share on other sites More sharing options...
RustBelt Posted August 16, 2022 Share Posted August 16, 2022 I think it may be “Everyone in Europe gets a vacation” time right now. 1 Link to comment Share on other sites More sharing options...
JudgementalRooster Posted August 23, 2022 Share Posted August 23, 2022 I've noticed this issue while learning, and pulling my imaginary hairs till I stumbled upon this post. Link to comment Share on other sites More sharing options...
UN9249 Posted January 17, 2023 Share Posted January 17, 2023 Still no fixes? my autoland crashed me yesterday ( [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
shishkin Posted January 17, 2023 Share Posted January 17, 2023 just checked quick mission and it works, not sure if it needs any fixes Link to comment Share on other sites More sharing options...
guitargamery Posted January 24, 2023 Share Posted January 24, 2023 Same here...it doesn't work properly, misses the 4th wire for a couple of meters(i mean i have tried it more than 10 times in this last week..so it is a fact) , besides that the glide slope looks perfect but when approaching the deck, i can clearly see the plane is a bit high so now i disengage auto throttle and full spoilers 5-10 meters before reaching the deck. a patch would be nice by now, already ruined me 2 hours of a mission last week, i wasnt able to bolter and crashed. Anyways i have to say that after discovering DCS by buying 3 modules(f14, f16 and a10II with all the sceneries) i just left MSFS with 2100hours of flight time...Im really in love Link to comment Share on other sites More sharing options...
Hillman Posted November 11, 2023 Share Posted November 11, 2023 (edited) Same problem here. Everything looks fine until just before touchdown on the SC. Overshoots with a few meters in 4 of 4 attempts. Used the Marianas CASE III Instant Action mission. Maybe to windy? I have the burble off and I'm using OB MT 2.9. The F-14 ACLS is supposed to work with the SC now? ---- Edit: Created my own mission with 0 wind and got the #2 wire 2 of 2 tries. So maybe the Marianas instant action mission was too windy....? Edited November 11, 2023 by Hillman 1 HW: Intel i5 13600K, 64Gb DDR5, RTX 4090, Winwing Orion 2 HOTAS, TM TPR rudderpedals, Pico 4 VR+VirtualDesktop (VDXR), Win11 DCS: F-5, F-86, F-16, F-15E, FA-18, F-14, Harrier, Viggen, M-2000C, A-10C, AH-64, UH-1, Mi-8, Mi-24, Gazelle, Ka-50, Mig-21, P-47, P-51, Spitfire, Mosquito, Bf-109, Fw-190A, Fw-190D, Yak-52, C101, all maps & tech, SuperCarrier Link to comment Share on other sites More sharing options...
Recommended Posts