escaner Posted March 29, 2024 Posted March 29, 2024 Hello I have tried the long version of this mission a couple of times and I can't get it to work. The convoy is stopped in the road and does not move. I never get any tasking after the "welcome" message that tells you to locate the convoy and orbit. Thanks [sIGPIC][/sIGPIC]
escaner Posted March 31, 2024 Author Posted March 31, 2024 Just tried the instant action version of the mission and I am having the same issue with it. [sIGPIC][/sIGPIC]
prccowboy Posted April 19, 2024 Posted April 19, 2024 did you fly to the FIXED POINT? the convoy won't start until you go to the fixed point (not WP1) 1
escaner Posted April 20, 2024 Author Posted April 20, 2024 did you fly to the FIXED POINT? the convoy won't start until you go to the fixed point (not WP1)Yes, at FP Jester tells you to fly to WP1. And there to orbit. They never move. [sIGPIC][/sIGPIC]
draconus Posted April 22, 2024 Posted April 22, 2024 On 3/31/2024 at 12:19 PM, escaner said: Just tried the instant action version of the mission and I am having the same issue with it. I can't confirm. Just tested IA F-14B Watching the Devildog and it works fine. I suggest to remove the mods and try again. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
escaner Posted April 27, 2024 Author Posted April 27, 2024 I have removed all mods and liveries and done a full repair the problem persists. This is the instant mission, where you arrive directly to WP1, no FP involved. What am I doing wrong? https://www.youtube.com/watch?v=yAj90_TthxM [sIGPIC][/sIGPIC]
draconus Posted April 29, 2024 Posted April 29, 2024 On 4/27/2024 at 2:06 PM, escaner said: What am I doing wrong? Idk, they are clearly stopped there. Maybe dcs.log can say something. btw: After the message to hold the orbit over the valley, the briefing info to orbit between WP1&2 no longer applies. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
Dagger31 Posted December 20, 2024 Posted December 20, 2024 you ever figure it out? I'm having the same problem; fly to FP, then WP1, then the convoy just sits there. Tried a few times, the enemy spawned randomly once when i was just flying around aimlessly and went way out of the area and back.
Nealius Posted December 21, 2024 Posted December 21, 2024 Has it ever moved? A year or two ago I played through the mission and completed all the tasks, but the convey never actually moved during the mission.
escaner Posted May 19 Author Posted May 19 Over a year later and new computer, I figured to try it again. The mission is still bugged: as always, the convoy never moves and now on top of that I get this popup from time to time. It would be nice if this mission got fixed... nullThanks [sIGPIC][/sIGPIC]
draconus Posted May 22 Posted May 22 (edited) OK, I have just fixed the mission and tested it all fine up to the landing. Please test - it's the IA F-14B for now but I think both A and full mission versions can be fixed quickly same way. https://limewire.com/d/rQosr#tHNCNbL0WI [edit: link expired, this was bad version anyway] Edited May 26 by draconus Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
escaner Posted May 24 Author Posted May 24 Hello draconus. That fixed the script error popup, unfortunately the convoy still does not move. I am attaching the track and dcs.log. All mods, scripts, keeboards and liveries were removed and shaders deleted. watching-the-devildog-instant.trk dcs.log [sIGPIC][/sIGPIC]
draconus Posted May 24 Posted May 24 6 hours ago, escaner said: Hello draconus. That fixed the script error popup, unfortunately the convoy still does not move. I am attaching the track and dcs.log. All mods, scripts, keeboards and liveries were removed and shaders deleted. Thank you for your feedback. It seems like the convoy just stops randomly at the start of the mission. If you try to restart the mission it should work 2nd or 3rd time*. It is not even scripts related - just simple AI group following the road to WP1. *You can quickly check them by going to free camera view Lctrl+F11, Lshift+W to find them in the valley - if they are stopped, they are there to stay, restart. I'll try to reconfigure the convoy to see if it makes any difference. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
draconus Posted May 24 Posted May 24 You can try this one - it runs fine with the convoy every time. Not tested full mission though and the convoy is cut down to just 7 HUMVEEs. https://limewire.com/d/TRbmQ#ReukBd0SID 1 Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
escaner Posted May 25 Author Posted May 25 I have tried three times the last version and all of them the convoy moved, awesome! If you want to fix the full mission I will definitely try it. [sIGPIC][/sIGPIC]
draconus Posted May 26 Posted May 26 Thanks again for testing. Got the single mission working but I have not tested whole mission, just up to the point when action starts - should be fine after that. https://limewire.com/d/NiRkj#i2GASF5iyz 2 Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
escaner Posted June 1 Author Posted June 1 On 5/27/2025 at 12:27 AM, draconus said: Thanks again for testing. Got the single mission working but I have not tested whole mission, just up to the point when action starts - should be fine after that. https://limewire.com/d/NiRkj#i2GASF5iyz I tried today this full mission, it worked great, thanks a lot! 1 [sIGPIC][/sIGPIC]
Scotch75 Posted Saturday at 09:22 PM Posted Saturday at 09:22 PM Hey @escaner, thanks for that. I last tried it about 2 weeks ago, and the convoy was stopping prior to reaching the action. It would be great if you could find your copy. The link from Draconus does not work anymore.Cheers!Sent from my SM-G998B using Tapatalk W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 64GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, Gigabyte 3060 12GB VRAM
draconus Posted 23 hours ago Posted 23 hours ago 14 hours ago, Scotch75 said: The link from Draconus does not work anymore. I could do it again and reupload but it's more work and time than necessary. It's some DCS bug that stops heavy trucks there. Just leave the HUMVEEs and delete the trucks from the convoy. One minute job. Win10 i7-10700KF 32GB RTX4070S Quest 3 T16000M VPC CDT-VMAX TFRP FC3 MiG-29A F-14A/B F-15E CA SC NTTR PG Syria
Scotch75 Posted 23 hours ago Posted 23 hours ago Ok, I'll give that a go tomorrow. Makes sense now that you mention the heavy trucks not making it up the steep incline, as I watched how the leading HUMVEE slowly crawled to a halt before entering the first trigger zone. Many thanks, @draconus.Cheers!Sent from my SM-G998B using Tapatalk W10 Home 64Bit, Intel Skylake I5 6600K 3.50GHz, ASUS ROG Stryx Z270F MoBo, 64GB G.Skill RipJaws V DDR4 3200 RAM, Samsung 960 Pro 512GB M.2 SSD (OS), Samsung 850 Pro 512GB SSD, 2TB Seagate SDHD, 2TB WD Green HDD, Gigabyte 3060 12GB VRAM
escaner Posted 2 hours ago Author Posted 2 hours ago On 11/22/2025 at 10:22 PM, Scotch75 said: Hey @escaner, thanks for that. I last tried it about 2 weeks ago, and the convoy was stopping prior to reaching the action. It would be great if you could find your copy. The link from Draconus does not work anymore. I uploaded the missions here: Full mission: https://drive.google.com/file/d/15t1iwaDLB3Lb_3T3jMA5Os8Meaqv4Rw3/view?usp=sharing I guess this will be the quick action mission: https://drive.google.com/file/d/1k26Bp-SzZBCmITOMrYG6W3YtgITyezZD/view?usp=sharing [sIGPIC][/sIGPIC]
Recommended Posts