Gideon312 Posted July 6 Posted July 6 (edited) 3 hours ago, Bailey said: May I ask a favour and do the reproduction steps with DCS keybinds only? Is the result the same as the app? I followed the steps in DCS using the keybinds and encountered the same issue. This indicates that the problem is not related to your mod. However, I want to note that your mod is currently my preferred choice. I can switch to your mod when I’m in the air during the flight, and by cycling the BARO/ALTRAD knob, I can at least fly or hover in increments of 10 feet higher or lower. (And a huge plus is not to bind all AI pilot stuff to my HOTAS but just use the mouse!) Edited July 6 by Gideon312 System: Win11 Pro, X870Pro RS Wifi 7 AM5, AMD Ryzen 7 7800X3D, 64GB RAM, NVIDIA GeForce RTX 4090, Corsair MP400 SSD (1TB for WIN), Corsair MP700 PRO (2TB for DCS), VR PIMAX Crystal.
GrEaSeLiTeNiN Posted July 6 Posted July 6 (edited) On 7/6/2024 at 3:55 PM, Gideon312 said: I followed the steps in DCS using the keybinds and encountered the same issue. This indicates that the problem is not related to your mod. However, I want to note that your mod is currently my preferred choice. I can switch to your mod when I’m in the air during the flight, and by cycling the BARO/ALTRAD knob, I can at least fly or hover in increments of 10 feet higher or lower. Yes you are right. So I tried the key bind "set 20ft" and it would not comply after doing an AI pilot ON/OFF in the air. This should be reported in the bugs section or PC won't fix it. The alternative is to use "Increase/Decrease Altitude" (instead of "set" increments) as those key binds are ok but then we won't know the increment value w/o the HUD. Update: Reported in the bugs section here. Let me know if I missed out anything. Edited July 8 by GrEaSeLiTeNiN 1 AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4 TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles
markturner1960 Posted July 6 Posted July 6 (edited) 12 hours ago, Bailey said: Drift is in equal increments. One click left will be canceled by one click right, and so on. You can also toggle the autopilot. Thanks, except it does not work like that for me. Once set drifting, the only way I can get him to stop is to press "Hover" again. I have carefully checked this several times.......I dont use toggle the AI pilot as from a hover, its very easy to have the aircraft tip over or drop suddenly as soon as you press that button....there seems to be some de synch going on between where he thinks the controls are and where they actually are. Of course this is a PC bug, not your app bug I guess..... Edited July 6 by markturner1960 System specs: PC1 :Scan 3XS Ryzen 5900X, 64GB Corsair veng DDR4 3600, EVGA GTX 3090 Win 10, Quest Pro, Samsung Odyssey G9 Neo monitor. Tir5. PC2 ( Helo) Scan 3XS Intel 9900 K, 32 GB Ram, 2080Ti, 50 inch Phillips monitor F/A-18C: Rhino FFB base TianHang F16 grip, Winwing MP 1, F-18 throttle, TO & Combat panels, MFG crosswind & DFB Aces seat Viper: Tianhang FSB Pro base with F-16 grip, Winwing F-16 throttle, plus ICP. MFG crosswind rudders. Helo ( Apache) set up: Virpil collective with AH64D grip, Cyclic : Rhino FFB base & TM F18 grip, MFG crosswind rudders, Total controls AH64 MFD's, TEDAC Unit.
jnr4817 Posted July 7 Posted July 7 Anyone get this exported into an iPad or tablet yet? 8600K|64 GB 3200|4090|m.2 http://www.blacksharkden.com/ Come join us!
Bailey Posted July 7 Author Posted July 7 On 7/6/2024 at 6:48 PM, GrEaSeLiTeNiN said: Yes you are right. So I tried the key bind "set 20ft" and it would not comply after doing an AI pilot ON/OFF in the air. This should be reported in the bugs section or PC won't fix it. The alternative is to use "Increase/Decrease Altitude" (instead of "set" increments) as those key binds are ok but then we won't know the increment value w/o the HUD. Can you post the bug report and then link here for others to add to? Thanks to everyone who tracked this bug down. DCS VoiceAttack Profiles | My Mods and Utilities on ED User Files | DiCE: DCS Integrated Countermeasure Editor DCS Update Witching Utility | DCS-ExportScripts for Stream Deck Community Github Library | Kiowa Integrated Overlays
Bailey Posted July 7 Author Posted July 7 On 7/6/2024 at 9:54 PM, markturner1960 said: Thanks, except it does not work like that for me. Once set drifting, the only way I can get him to stop is to press "Hover" again. I have carefully checked this several times.......I dont use toggle the AI pilot as from a hover, its very easy to have the aircraft tip over or drop suddenly as soon as you press that button....there seems to be some de synch going on between where he thinks the controls are and where they actually are. Of course this is a PC bug, not your app bug I guess..... Hmm, if someone else is able to confirm this or provide some feedback, that would be great. I "invented" or simply "made up" the drift command based on what i saw to work for the module at the time, so knowing if it is an error via dcs, the kiowa, or the app is difficult to tell. DCS VoiceAttack Profiles | My Mods and Utilities on ED User Files | DiCE: DCS Integrated Countermeasure Editor DCS Update Witching Utility | DCS-ExportScripts for Stream Deck Community Github Library | Kiowa Integrated Overlays
Bailey Posted July 8 Author Posted July 8 4 hours ago, jnr4817 said: Anyone get this exported into an iPad or tablet yet? Not that I know of. DCS VoiceAttack Profiles | My Mods and Utilities on ED User Files | DiCE: DCS Integrated Countermeasure Editor DCS Update Witching Utility | DCS-ExportScripts for Stream Deck Community Github Library | Kiowa Integrated Overlays
GrEaSeLiTeNiN Posted July 8 Posted July 8 11 hours ago, Bailey said: Can you post the bug report and then link here for others to add to? Thanks to everyone who tracked this bug down. Reported in the bugs section here. Let me know if I missed out anything. 1 AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4 TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles
davidp57 Posted July 11 Posted July 11 Nice! I'll try that asap. Zip - VEAF :pilotfly: If you want to learn, talk and fly with french-speaking friends, the Virtual European Air Force is here for you ! Meet us on our Discord and our forum If you're a mission creator, you may want to check the VEAF Mission Creation Tools (and its GitHub repository) a set of open-source scripts and tools that make creating a dynamic mission a breeze !
TFS Posted July 13 Posted July 13 Maybe an update bugged this, but I can't get the overlay to hide, once I do, it pops back up as if I pressed the key bindings. Thus the cursor is always active and center to my screen. I can't get this to stop, I did not notice this prior to yesterdays update.
Bailey Posted July 13 Author Posted July 13 46 minutes ago, TFS said: Maybe an update bugged this, but I can't get the overlay to hide, once I do, it pops back up as if I pressed the key bindings. Thus the cursor is always active and center to my screen. I can't get this to stop, I did not notice this prior to yesterdays update. That is unfortunate. Try a re-install after removing the hook lua file and the folder in Scripts. Are you playing in VR? Does anyone else have this issue? DCS VoiceAttack Profiles | My Mods and Utilities on ED User Files | DiCE: DCS Integrated Countermeasure Editor DCS Update Witching Utility | DCS-ExportScripts for Stream Deck Community Github Library | Kiowa Integrated Overlays
supersylph Posted July 13 Posted July 13 2 hours ago, Bailey said: That is unfortunate. Try a re-install after removing the hook lua file and the folder in Scripts. Are you playing in VR? Does anyone else have this issue? I use screen and I had a similar problem.It pops up randomly after closing the window using the shortcut key.
Bailey Posted July 13 Author Posted July 13 (edited) 6 hours ago, TFS said: Maybe an update bugged this, but I can't get the overlay to hide, once I do, it pops back up as if I pressed the key bindings. Thus the cursor is always active and center to my screen. I can't get this to stop, I did not notice this prior to yesterdays update. 2 hours ago, supersylph said: I use screen and I had a similar problem.It pops up randomly after closing the window using the shortcut key. I have updated KIO-WA to version v0.6.1 https://github.com/asherao/KIO-WA/releases - Adjusted Barundus on/off logic to account for DCS-isms - Updated app show and hide conditions Hopefully that helps those who are having this issue. If the issue persists, please post with as much info that you can so we can squash the bug. I realized that the detection for showing the app when the player entering the kiowa in MP was triggering on ALL MP players, not just the players KW. Thanks! Edited July 13 by Bailey 1 3 DCS VoiceAttack Profiles | My Mods and Utilities on ED User Files | DiCE: DCS Integrated Countermeasure Editor DCS Update Witching Utility | DCS-ExportScripts for Stream Deck Community Github Library | Kiowa Integrated Overlays
TFS Posted July 13 Posted July 13 (edited) Fast response, I'll check it out later today. You never fail. Edited July 13 by TFS 1
Hunter_5E Posted July 28 Posted July 28 Loving these overlays - many thanks for making them available to us all. Great work. Just a thought on the getting round the lack of DCS key binds for bringing them up:- Instead of hiding each overlay completely, could you just minimize them each to a small button so they can sit unobtrusively in a bottom corner of the screen? We could then just click that button to bring it back up without having to use keyboard shortcuts or setup voice attack or joy to key etc. Would be even nicer if we could place that mini button independently of the main overlay so we could put it wherever we want - not tied to main overlay location. A blank spot on the cockpit panel or frame or such. Probly need to be an option though as those who do use voice attack etc won't want it minimizing to a button. Can this be done?
TFS Posted July 29 Posted July 29 On 7/13/2024 at 8:04 AM, Bailey said: I have updated KIO-WA to version v0.6.1 https://github.com/asherao/KIO-WA/releases - Adjusted Barundus on/off logic to account for DCS-isms - Updated app show and hide conditions Hopefully that helps those who are having this issue. If the issue persists, please post with as much info that you can so we can squash the bug. I realized that the detection for showing the app when the player entering the kiowa in MP was triggering on ALL MP players, not just the players KW. Thanks! Totally thought I responded after I tested it, your update fixed the issue and now works flawlessly. I have not seen or noticed any other issues, I use it daily since your update. Great work! 1
Razorback Posted July 30 Posted July 30 (edited) Since the last DCS update I have some issue with the MFK Overlay. It's working fine in stand alone but don't work anymore during multiplayer mission on server. Additionnaly : HiddenOnLaunch is set to true but the MFK is still poping on the DCS Main screen when starting the game. Edited July 30 by Razorback
Gabreil Posted August 5 Posted August 5 (edited) Cool addon. Great when learning the Kiowa. Helping me greatly in my journey to try and be able to fly it... Thank you I have noticed one thing.. Every few starts of DCS, it does not show. Only way i can get it back is deleting the config\KIO-WA\KIO-WAConfig.lua Any reason why its not always persistant? Edited August 5 by Gabreil
TFS Posted August 11 Posted August 11 I'm gonna have to be THAT guy... Any chance you might do an overlay like this Kiowa overlay for the chinook since it has an pretty cool AI copilot too? It's early access, so obviously things will update and change... just asking.
Recommended Posts