Deadman Posted March 11, 2017 Author Posted March 11, 2017 A good read. http://www.avgeekery.com/hog-pilot-jots-down-his-twelve-greatest-a-10-memories/ https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
hansangb Posted March 11, 2017 Posted March 11, 2017 And here's the GAU shredding a HMMWV in slow motion. hsb HW Spec in Spoiler --- i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1
Mr.Fenestron Posted March 12, 2017 Posted March 12, 2017 Do you want me to give a call to AeroMark on your behalf and see if something can be worked out? In their demonstration video the guy said he had been contracted by a client to build replica panels, that's the only reason I think they might do it and from what I've seen of other companies, they offer the most 1:1 panels.
Deadman Posted March 12, 2017 Author Posted March 12, 2017 Please don't call any one to representing me. I have not seen any indication that AeroMark does contract work to make panels I have watched the video several times. I have found their quote section for laser and $43,125.00 is a bit a much for something I have no interest in make a business out of https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted March 20, 2017 Author Posted March 20, 2017 Well do to an act of friendship yes I do happen to have one or two even though my new nick is Satan :evil: I have just about finished the rebuild of the last panel i needed for the side consoles the AAP has been touched up base coat of whit is on the knobs after stripping. Over all a stunning panel Thanks my friend https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Mr.Fenestron Posted March 20, 2017 Posted March 20, 2017 Looks pretty damn good DM. It will make a great addiction. Can't wait to see it all put together.
Duckling Posted March 21, 2017 Posted March 21, 2017 That look great DM, nice work. Nothing compare with true quads. A bit more tedious to connect but the feeling using'em is worth it. Just having a look of is woth something too Cheers /Gus - - - -
Deadman Posted March 21, 2017 Author Posted March 21, 2017 Now this looks better with out the flash and some real knobs that i pulled out. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted March 21, 2017 Posted March 21, 2017 Whoa that is a nice catch Deadman :thumbup: Congratulations Sir Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Deadman Posted March 22, 2017 Author Posted March 22, 2017 Thanks it is finally getting warmer so time to put the consoles back in the pit and start purchasing some type of IO cards. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted March 26, 2017 Author Posted March 26, 2017 (edited) Well after chores I made a bit of progress putting things in to the correct places. Edited March 27, 2017 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
a3an4e Posted March 26, 2017 Posted March 26, 2017 Awesome built...just jaw Sent from my SM-N910G using Tapatalk
Duckling Posted March 26, 2017 Posted March 26, 2017 Great assembly and reference, thanks DM The big red button on outer rightside, below the Env panel, what is that ? A trainer 'power-cut' or something else ? - - - -
Deadman Posted March 26, 2017 Author Posted March 26, 2017 It is the emergency power kill switch a push off switch For the massive DC brush motors in the FFB system. https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Duckling Posted March 26, 2017 Posted March 26, 2017 Figures :-), those beasts looks strong enough to crunch human bones Never seen the rightside inner, downmost quad either. Is that a trainer only or something standard existing that normally is hidden by other stuff ? - - - -
Deadman Posted March 26, 2017 Author Posted March 26, 2017 that is a simulator data recorder VS-1500. I need to fabricate a body for it the guys selling them only had the face plate https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
PicksKing Posted March 26, 2017 Posted March 26, 2017 Hey Deadman, very interesting avatar. I wonder where did you get it from? ;) [sIGPIC][/sIGPIC] Gainward RTX 2080 OC | i7 8700K OC | 32GB G.Skill RipJaws V DDR4 3600 MHz | MSI Z370-A PRO | Samsung 970 EVO 500GB
Deadman Posted March 26, 2017 Author Posted March 26, 2017 NO idea I have the attention span of a gold fish after work 55 hours a week. I take it it is your work? It is great if your want me to pull it just say so . Sorry for any offence https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
PicksKing Posted March 26, 2017 Posted March 26, 2017 NO idea I have the attention span of a gold fish after work 55 hours a week. I take it it is your work? It is great if your want me to pull it just say so . Sorry for any offence No no, I just saw this and found it very funny while saying to myself "What the... dont you know this yellow guy?" :) Keep it. Its ok to me. [sIGPIC][/sIGPIC] Gainward RTX 2080 OC | i7 8700K OC | 32GB G.Skill RipJaws V DDR4 3600 MHz | MSI Z370-A PRO | Samsung 970 EVO 500GB
Deadman Posted March 26, 2017 Author Posted March 26, 2017 Thanks !!! https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Deadman Posted April 10, 2017 Author Posted April 10, 2017 Guys heads up!! Just found this on Reid's air publishing FB page. I would highly suggest you all make a quick decision to get a copy!!! With a firm arrival date of 8 May, I will now accepting preorders for The Modern Hog Guide, 2nd Edition. However, this date may fluctuate a few days either earlier or later than the 8 May target date. Thanks everyone!! https://www.reidairpublishing.com/product-p/rap016.htm 2 https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
Hansolo Posted April 10, 2017 Posted April 10, 2017 Whoohoo about time. Thanks for the heads up DM. Pre-order on the way. Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
MacFevre Posted April 11, 2017 Posted April 11, 2017 Thanks DM. Guess I won't be able to sell my first ed. now for $200. ;) Buttons aren't toys! :smilewink: My new Version 2 Pit: MacFevre A-10C SimPit V2 My first pit thread: A-10C Simulator Pit "The TARDIS." Dzus Fastener tutorial, on the inexpensive side: DIY Dzus Fastener
cichlidfan Posted April 11, 2017 Posted April 11, 2017 (edited) Thanks DM. Absolutely awesome. Ordered. EDIT: DM, I reposted your message in the A-10 section just to help spread the word. Edited April 11, 2017 by cichlidfan ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
Recommended Posts