Moa Posted October 11, 2010 Share Posted October 11, 2010 I had the same problem, but switching everything to application controlled, and (more importantly) everything else (Mipmap Detail etc.) to quality instead of performace fixed it for me. Hope it helps! Cheers, Crusader Thanks for the tip. Link to comment Share on other sites More sharing options...
nomdeplume Posted October 11, 2010 Share Posted October 11, 2010 anyone figured out the right mfcd flickering?? i know it was mentioned with ATI cards, but i have an EVGA. tried all sorts of nvidea control panel settings. marginal results at best. I had flickering MFCDs when the targeting pod or Maverick imagery was displayed - solved by setting the cockpit texture resolution option to one of the 'every frame' options. Link to comment Share on other sites More sharing options...
Selot Posted October 11, 2010 Share Posted October 11, 2010 ??? 1 Link to comment Share on other sites More sharing options...
Lio Posted October 11, 2010 Share Posted October 11, 2010 What is your question again sorry? Link to comment Share on other sites More sharing options...
nomdeplume Posted October 11, 2010 Share Posted October 11, 2010 What resolution are you running at, and have you set everything in the graphics setup to the lowest possible settings? Lower FPS than in BS is to be expected, as a) updated engine and details require more rendering power and b) it's an unoptimised beta. Link to comment Share on other sites More sharing options...
bumfire Posted October 11, 2010 Share Posted October 11, 2010 Why does selot have neg rep ? he has only 2 posts and both posts are in this thread, why would anyone neg rep him for the two above posts ?? Link to comment Share on other sites More sharing options...
Wheelyy69 Posted October 11, 2010 Share Posted October 11, 2010 Mmmmm... Seems I got a new one : Pretty hard to take, though... I was trying to improve graphics (all was set to low or off...) So everytime I turn MSAA on, whatever the setting, it happens. It's not permanent, it is visible only when I turn the camera and look around... during the movement, I mean... And I think the center of the circle is the sun, but I'm not sure and it's pretty hard to verify it... So here's my config : Intel E8400 @Stock 2x HD4850 crossfired 4 Gb memory Windows 7 64bits Settings : Textures High Scenes High Civ Traffic Low Water Low Visible Range Low Heat Blur On Shadows Low Resolution 1680*1050 Aspect 16:10 Monitors 1 Screen Res. Of Cockpit Displays 1024 MSAA : the point... Clutter/Grass 300m Full Screen HDR TSSAA So what do you think ? ;) [sIGPIC]http://www.digitalcombatsimulator.com/img/userbars/DCS_Ka-50_Pilot_UB12.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
nomdeplume Posted October 11, 2010 Share Posted October 11, 2010 Negative? It says 0... that's just no rep, which is pretty much expected for someone with just two posts. Link to comment Share on other sites More sharing options...
NotiA10 Posted October 11, 2010 Share Posted October 11, 2010 well ! give him a positive rep ! no chip of your shoulder 1 :pilotfly: NotiA10 CoolerMaster HAF RC-932 - Intel Core i7 950 - Arctic Cooling Freezer 7 Pro - Gigabyte GA-X58A-UD3R - Kingston DDR3 6GB - Gigabyte Radeon HD 5870 EF 6 Edition - Western Digital 640GB SATA-III - CoolerMaster 700W - TrackIR Pro 4 - Saitek X52 - Saitek Rudder Pedals - Hotas Warthog Link to comment Share on other sites More sharing options...
Druid_ Posted October 11, 2010 Share Posted October 11, 2010 What texture buffering is currently employed in A10c current beta build ? e.g. triple buffering i7-7700K : 16Gb DDR4 2800 Mhz : Asus Mobo : 2TB HDD : Intel 520 SSD 240gb : RTX 2080ti: Win10 64pro : Dx10 : TrackiR4 : TM Warthog : ASUS ROG SWIFT PG348Q Link to comment Share on other sites More sharing options...
bumfire Posted October 11, 2010 Share Posted October 11, 2010 Negative? It says 0... that's just no rep, which is pretty much expected for someone with just two posts. I thought it started at 0 but green ? Even though it says 0, he could easily have a few neg reps, as it takes a few reps to get you moving from 0. Link to comment Share on other sites More sharing options...
alexiao73 Posted October 11, 2010 Share Posted October 11, 2010 Extending the information in my first post after more testing: -Happends always with TEXTURES set to HIGH in Caucaso theater -Happends always when I load a mission in Nellis NO MATTER the graphics settings, even the lowest. It looks like this after a glimpse of the cockpit: Thos rectangles are suppouse to be the exit menu and the info bar in the ext. view. Regards Tulkas the same identical issue for me. my system: E8500 4Gb Ram Radeon 4850 512Mb Drv 9.8 Win XP Pro 32bit My issue is always the same and I couldn’t find any sort of video options and configurations (neither in Ati CCC) to workaround it (even setting all the graphic options to the lowest values possible and MSAA to off): if set Texture to HIGH in caucaso region and to High or MID (sometime even LOW) in Nevada region cause video corruptions at the end of the loading screen. I can hear the sound but video is like the screenshots previously posted by Tulkas. I could try to update the ati driver but if I'm not wrong Tulkas has reported that it didn’t help. Don’t think is a memory issue because other ati or nvidia 512mem card doesn’t have such issue. I could AA work only after have set “application setting” in Ati CCC, so that’s ok. Now I'm flying (quite fine) at 1900x1200 with most of settings to MID. cheers System: i5 10600k @4.80Ghz - MSI Z490 Tomahawk- MSI GTX 1080ti 11Gb, 32 Gb Ram Corsair Vengaence PC-ddr4 3200 MHz - LG 32” 1440p - Saitek X52 + CH Pro Pedals - TrackIR 5 - Win10 Pro-64bit :smilewink: [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
BKLronin Posted October 11, 2010 Share Posted October 11, 2010 Radeon 4850 512Mb Drv 9.8 Is that the most actual driver available for XP ? [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Feuerfalke Posted October 11, 2010 Share Posted October 11, 2010 anyone figured out the right mfcd flickering?? i know it was mentioned with ATI cards, but i have an EVGA. tried all sorts of nvidea control panel settings. marginal results at best. Disabled SLI. Gigabyte GA-Z87-UD3H | i7 4470k @ 4.5 GHz | 16 GB DDR3 @ 2.133 Ghz | GTX 1080 | LG 55" @ 4K | Cougar 1000 W | Creative X-Fi Ti | TIR5 | CH HOTAS (with BU0836X-12 Bit) + Crosswind Pedals | Win10 64 HP | X-Keys Pro 20 & Pro 54 | 2x TM MFD Link to comment Share on other sites More sharing options...
Feuerfalke Posted October 11, 2010 Share Posted October 11, 2010 Is that the most actual driver available for XP ? No, it's not - maybe for the card, but definitely not for XP: http://downloads.guru3d.com/ATI-Catalyst-10.9-for-Windows-XP-%2832-bit%29-download-2621.html Gigabyte GA-Z87-UD3H | i7 4470k @ 4.5 GHz | 16 GB DDR3 @ 2.133 Ghz | GTX 1080 | LG 55" @ 4K | Cougar 1000 W | Creative X-Fi Ti | TIR5 | CH HOTAS (with BU0836X-12 Bit) + Crosswind Pedals | Win10 64 HP | X-Keys Pro 20 & Pro 54 | 2x TM MFD Link to comment Share on other sites More sharing options...
alexiao73 Posted October 11, 2010 Share Posted October 11, 2010 Is that the most actual driver available for XP ? the most actual ati drivers are 10.9, but Tulkas (same card as mine)reported that 10.9 didn't help with that issue. I could try the update in any case but 9.8 drv are one of the best version for the 4850 (expecially when you need to force the V-sync to avoid tearing effect). cheers System: i5 10600k @4.80Ghz - MSI Z490 Tomahawk- MSI GTX 1080ti 11Gb, 32 Gb Ram Corsair Vengaence PC-ddr4 3200 MHz - LG 32” 1440p - Saitek X52 + CH Pro Pedals - TrackIR 5 - Win10 Pro-64bit :smilewink: [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted October 11, 2010 Share Posted October 11, 2010 the most actual ati drivers are 10.9, but Tulkas (same card as mine)reported that 10.9 didn't help with that issue. I could try the update in any case but 9.8 drv are one of the best version for the 4850 (expecially when you need to force the V-sync to avoid tearing effect). cheers Try everything, absolutely everything. That's how things get fixed. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
july865 Posted October 11, 2010 Share Posted October 11, 2010 disabled sli . bummer that i have to disable the sli. anything else?? . i mean, i get decent frame rates atm (16-38}. i would say my average is approx 22-24. i can live with that. but if i have to shut down the sli..... ouch. Asus x99, i7 5930k, 32g mem, MSI 1070GTX, 970 Samsung M.2, LG 35in Ultra-Wide, TrackIR 4 Thrustmaster Warthog HOTAS [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
jramos Posted October 11, 2010 Share Posted October 11, 2010 A-10 will not start Game starts fine,however when i try to start a mission it gets stuck while loading and i get the following error: "cant allocate vertex buffer for 25666 verticies node:airfield lamps" Computer stats are dell intel pentium 4 3.5 ghz 3g ram ati 2600 hd 512 graphics card running on windows vista 32bit. any help would be appreciated. i have uninstalled and installed game several times with same results ps. i meant to title the tread game will not load Link to comment Share on other sites More sharing options...
alexiao73 Posted October 11, 2010 Share Posted October 11, 2010 Try everything, absolutely everything. That's how things get fixed. Nate that's right! :thumbup: Tonight I'll go with drivers update, let's hope...:smilewink: System: i5 10600k @4.80Ghz - MSI Z490 Tomahawk- MSI GTX 1080ti 11Gb, 32 Gb Ram Corsair Vengaence PC-ddr4 3200 MHz - LG 32” 1440p - Saitek X52 + CH Pro Pedals - TrackIR 5 - Win10 Pro-64bit :smilewink: [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
thisisentchris87 Posted October 11, 2010 Share Posted October 11, 2010 Update DirectX and your Video Card drivers. Also, there are reported problems with A-10C and ATI cards. As I use Nvidia I don't pay attention to the reports, so I don't have all the details. Stick to it, its just a beta. [sIGPIC][/sIGPIC] Antec DF-85 Case, Asus Sabertooth Z77, Intel i5-3570k Ivy Bridge 3.4 GHz, air-cooled with Noctua NH-D14, Corsair Vengeance 16GB, EVGA GTX 560 TI, Corsair Professional Series 750W, Creative Sound Blaster X-fi Titanium HD, ASUS EA-N66 Wireless Adapter Link to comment Share on other sites More sharing options...
Feuerfalke Posted October 11, 2010 Share Posted October 11, 2010 . bummer that i have to disable the sli. anything else?? . i mean, i get decent frame rates atm (16-38}. i would say my average is approx 22-24. i can live with that. but if i have to shut down the sli..... ouch. Test it. If the bug is gone, you have to decide which you prefer flickering MFCD or running SLI. And you can also see for yourself, if the decision is all that difficiult (If SLI or not has any effect on FPS). Remember: It's a beta. 1 Gigabyte GA-Z87-UD3H | i7 4470k @ 4.5 GHz | 16 GB DDR3 @ 2.133 Ghz | GTX 1080 | LG 55" @ 4K | Cougar 1000 W | Creative X-Fi Ti | TIR5 | CH HOTAS (with BU0836X-12 Bit) + Crosswind Pedals | Win10 64 HP | X-Keys Pro 20 & Pro 54 | 2x TM MFD Link to comment Share on other sites More sharing options...
Lio Posted October 11, 2010 Share Posted October 11, 2010 Also you need to run as administrator, the game exe that is. And when you do get into the A10 and it really wont start press RALT+HOME and RCTRL+HOME :D Link to comment Share on other sites More sharing options...
Focha Posted October 11, 2010 Share Posted October 11, 2010 the same identical issue for me. my system: E8500 4Gb Ram Radeon 4850 512Mb Drv 9.8 Win XP Pro 32bit My issue is always the same and I couldn’t find any sort of video options and configurations (neither in Ati CCC) to workaround it (even setting all the graphic options to the lowest values possible and MSAA to off): if set Texture to HIGH in caucaso region and to High or MID (sometime even LOW) in Nevada region cause video corruptions at the end of the loading screen. I can hear the sound but video is like the screenshots previously posted by Tulkas. I could try to update the ati driver but if I'm not wrong Tulkas has reported that it didn’t help. Don’t think is a memory issue because other ati or nvidia 512mem card doesn’t have such issue. I could AA work only after have set “application setting” in Ati CCC, so that’s ok. Now I'm flying (quite fine) at 1900x1200 with most of settings to MID. cheers I've got the same issue, posted here; http://forums.eagle.ru/showthread.php?p=998749#post998749 Regards. ASUS N552VX | i7-6700HQ @ 2.59GHz | 16 GB DDR3 | NVIDIA GF GTX 950M 4 Gb | 250 Gb SSD | 1 Tb HD SATA II Backup | TIR4 | Microsoft S. FF 2+X52 Throttle+Saitek Pedals | Win 10 64 bits Link to comment Share on other sites More sharing options...
71st_Mastiff Posted October 11, 2010 Share Posted October 11, 2010 (edited) new install of nvidia 260.89 betas. I get this error i.e. screen shot I also reinstalled DX9c june same error. 00000.000 INFO VFS: Mounted ./Temp to /tmp/. 00000.012 INFO Dispatcher: 2010/10/11 08:04 V810271318 00000.144 DEBUG NET: Lua: events.lua loaded 00000.144 DEBUG NET: Lua: events.lua loaded 00000.144 DEBUG NET: Lua: loading ./Scripts/net/default.cfg : OK 00000.144 DEBUG NET: Lua: loading ./Config/network.cfg : OK 00000.145 DEBUG NET: Lua: loading ./Scripts/net/net_types.lua : OK 00000.974 INFO WorldPlugIns: Loaded plugin module CockpitBase.dll 00001.165 DEBUG dDispatcher::InitLow: ./MissionEditor/data/scripts/unitsclasses.lua loaded 00001.168 DEBUG dDispatcher::InitLow: ./MissionEditor/data/NewMap/classifier.lua loaded 00001.169 DEBUG dDispatcher::InitLow: ./MissionEditor/data/scripts/options.lua loaded 00001.171 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Database/Names.lua 00001.172 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Database/Racks.lua 00001.174 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Database/Types.lua 00001.175 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Config/Weapons/Guns.lua 00001.175 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Config/Weapons/Bombs.lua 00001.175 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Config/Weapons/DrawInfo.lua 00001.175 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/Pylons.lua 00001.176 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/SFM_Aerod.lua 00001.176 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/SFM_Engine.lua 00001.178 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/Damage.lua 00001.178 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/AIControl.lua 00001.179 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/MechTiming.lua 00001.179 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/helicopter_exhaust.lua 00001.180 DEBUG dDispatcher::InitLow: Loaded wInfo: ./Scripts/Aircrafts/_Common/Lights.lua 00001.273 ERROR DXRENDERER: Create device failed, E_INVALIDARG 00001.273 ERROR VISUALIZER: ChangeResolution: renderer->initialize() failed Edited October 11, 2010 by Mastiff " any failure you meet, is never a defeat; merely a set up for a greater come back, " W Forbes "Success is not final, failure is not fatal, it is the courage to continue that counts," Winston Churchill " He who never changes his mind, never changes anything," MSI z690MPG DDR4 || i914900k|| ddr4-64gb PC3200 || MSI RTX 4070Ti|Game1300w|Win10x64| |turtle beach elite pro 5.1|| ViRpiL,T50cm2|| MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Samsung|| Link to comment Share on other sites More sharing options...
Recommended Posts