Cibit Posted April 3, 2011 Posted April 3, 2011 Hi, I had some nice feedback after posting my explanation of adding jtac's to missions, so now I feel I should make a guide like Warrior X fantastic series. Now I am not the worlds greatest expert but I do hope this will be of use to some people. Any comments or additions feel free to post and also any mistakes I have made:)Cib’s guide to adding Jtac to generated missions.pdf 3 i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
GAJ52 Posted April 3, 2011 Posted April 3, 2011 Great tutorial, thanks for posting it :thumbup: GAJ52 Intel i7-7700K @ 4.60GHz | 32 GB Ram | Win 10 Pro 64 | GTX 1080i 11.00MB | Saitek X52 Pro
delta9856 Posted April 3, 2011 Posted April 3, 2011 Thanks for posting this, will check it out when i get some time :) Oli 'Scarecrow' Lusk Windows 7 Ultimate 64-bit Intel Core i7 3930K @ 4.20Ghz ASUS Rampage IV Extreme Motherboard 16GB DDR3 RAM EVGA Geforce GTX 680 4GB
MemphisBelle Posted June 24, 2011 Posted June 24, 2011 I´ve added that usefull guide to the tutorial List BlackSharkDen | BSD Discord | DCS Tutorial Collection
BBQ Posted June 24, 2011 Posted June 24, 2011 Nice--thanks CIBIT--got me right into the action without having to spend an hour trying to find something in the GUI manual.
Cibit Posted June 24, 2011 Author Posted June 24, 2011 Glad its proven useful :) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Boston87 Posted November 10, 2012 Posted November 10, 2012 ok so i got this from JTAC? 1:IP ADDER 2:289 {offset} 3:7nm I know what lines 4,5,6,7.ETC... are but what does 1,2&3 mean?
Evil.Bonsai Posted November 14, 2012 Posted November 14, 2012 ok so i got this from JTAC? 1:IP ADDER 2:289 {offset} 3:7nm I know what lines 4,5,6,7.ETC... are but what does 1,2&3 mean? http://forums.eagle.ru/showthread.php?t=58793 download the 9-line card.He has brief explanations for each line. Basically,the target will be 7nm on a heading of 289 from IP ADDER.
oceanoftimeGER Posted December 31, 2012 Posted December 31, 2012 Hey guys, I am having a lot of trouble setting up a very basic JTAC mission. If some of you guys can take a look at this .miz file and tell me what I'm doing wrong I'd appreciate it. JTAC tells me that there are no targets and I'm ready to depart.JTAC TEST.miz
Madone Posted December 31, 2012 Posted December 31, 2012 Hi, I got it working. Try it. I just deleted and added it again to be sure, set "invisible" in 2nd command. He's giving me all the targets.JTAC TEST.miz Strike Posture Set CAS Center of Excellence Intel Core i5 4690k @4,6Ghz, Gigabyte GTX 970 OC, Gigabyte Z97-X, 16GB G Skill Sniper @2400, Samsung 860/850 EVO , Win 10 64 bits, Dual monitors 27"@144"Opentrack + TM Warthog + Saitek pro flight combat
oceanoftimeGER Posted December 31, 2012 Posted December 31, 2012 Hi, I got it working. Try it. I just deleted and added it again to be sure, set "invisible" in 2nd command. He's giving me all the targets. Hi Madone, it works now! That's great! But I am confused, what exactly did I do wrong? In my mind it should have still worked even if he wasn't invisible, no? Thanks again.
Madone Posted December 31, 2012 Posted December 31, 2012 (edited) It will work invisible or not, if not, the chance for your TACP to be killed increase ofc. Just that. You have to set in order your commands, the 0 is the highest priority. Imagine your JTAC IRL : -he finds a spot (you place it on map) -sets his camouflage and stay hide(you set him invisible) -he announces his callsign and its frequency (IRL at a JTAC commander) -he spots the targets that you assign and yells at the radio :) Also I think nothing as to interfere between the communication commands, try to set the status of the unit before everything else, e.g immortal, invisible, anyway you want him to be invisible before doing its job so... Hope this helps! Have fun!!:thumbup: PS : you're very welcome :) Edited January 3, 2013 by Madone Mistakes! damnit! Strike Posture Set CAS Center of Excellence Intel Core i5 4690k @4,6Ghz, Gigabyte GTX 970 OC, Gigabyte Z97-X, 16GB G Skill Sniper @2400, Samsung 860/850 EVO , Win 10 64 bits, Dual monitors 27"@144"Opentrack + TM Warthog + Saitek pro flight combat
oceanoftimeGER Posted January 1, 2013 Posted January 1, 2013 Hi Madone, thank you for your time and answers! I think for now I've got everything working the way I want it to. If I run into any more trouble I'll give you a shout! :)
rogonaut Posted May 13, 2016 Posted May 13, 2016 Hi, I got it working. Try it. I just deleted and added it again to be sure, set "invisible" in 2nd command. He's giving me all the targets. just curious you gave him the callsign finger and a frequency of 131 after that u made fac attack group with callsign axeman and frequency 133 so i guess the other two positions in the advanced wp options are obsolete. i want him to IR laze for a mission im making for the gazelle - no luck so far. he only wants to tell me some coordinates i cant use in the nadir. anyone knows how to?
Recommended Posts