IonicRipper Posted February 4, 2013 Posted February 4, 2013 I'm trying to learn to start the engine on my own using SDeath's checklist. I'm at the point where i have to ask for start up clearance but i get no response. Here's what i did before asking for clearance (from the checklist.) CHECK PARKING BRAKE ON BATT 1 BATT 2 INTERCOM LIGHT TEST EKRAN/VOICE MESSAGE UNIT TEST SPU-9 RADIO PANEL GRND CREW REQUEST EXTERNAL POWER EXTERNAL DC EXTERNAL AC SPU-9 RADIO PANEL VHF 2 VHF 1 ON VHF 2 ON EKRAN/HYDRAULICS POWER RESET MASTER WARNING STOPPED ENG EGT GAUGE TEST INU HEAT INU POWER K-041 SHKVAL POWER ABRIS POWER STANDBY ATTITUDE INDICATOR (SAI) FIRE SUPRESSION SYSTEM TEST FIRE SUPRESSION SYSTEM OPER FUEL QTY FUEL METER GAUGE TEST APU SHUTOFF VALVE SWITCH FWD BOOSTPUMP AFT BOOSTPUMP CHECK CROSSFEED ON I did not change the default R-800 frequency (124.0) maybe that's the problem? Any ideas? i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
Erforce Posted February 4, 2013 Posted February 4, 2013 Hehe... what i love most in BS2 :) Well, at first glance : You turn you SPU9 PTT to ground crew : You can start without External Power you know ;) Ground crew is used especially for rearming (+HMS/NVG) without cutting engines. Re-switch to normal comms (VHF-1?) once you don't need them anymore. If you are on real communication options, be sure to check the airport frequency in mission editor or manual. But if you can talk on comm with ground crew... you should be good with tower too on VFH1. TASK / ROLES acronyms guide Black Shark A.I. datalink guide illustrated (v1.2.4 Available on Wiki) DCS World Codex 1.1 : full units list (Speed/Weapons/Armor thickness/Threat zone/Weapon damage...) (Oct 2013) BlackShark 2 1.2.x Bug and glitches thread (v1.2.7)
Watari Posted February 4, 2013 Posted February 4, 2013 you must bind the spu9 comm key. the comm key is not "#" since 1.2.2. :matrix: =SPEED IS LIFE=:matrix: http://www.planeandpilotmag.com/speed-is-life.html
IonicRipper Posted February 4, 2013 Author Posted February 4, 2013 (edited) Thanks Erforce, i found the correct frenquency and got a responce from the tower. I thought i saw in the manual that the game usually spawns you with the right frequency already selected. Is there a quick reference table with the games airfield frequencies? Edited February 4, 2013 by IonicRipper i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
Erforce Posted February 4, 2013 Posted February 4, 2013 Page 15-2 from BS manual. I saw someone advising to export those page to have instant access later. Happy flying ! TASK / ROLES acronyms guide Black Shark A.I. datalink guide illustrated (v1.2.4 Available on Wiki) DCS World Codex 1.1 : full units list (Speed/Weapons/Armor thickness/Threat zone/Weapon damage...) (Oct 2013) BlackShark 2 1.2.x Bug and glitches thread (v1.2.7)
IonicRipper Posted February 4, 2013 Author Posted February 4, 2013 Merci :) i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
Yurgon Posted February 5, 2013 Posted February 5, 2013 Is there a quick reference table with the games airfield frequencies? If you don't have one at hand, you can simply click the airport icon in the F10 map, it'll show its frequency.
IonicRipper Posted February 5, 2013 Author Posted February 5, 2013 Oh thanks. I did not know that i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
IonicRipper Posted February 5, 2013 Author Posted February 5, 2013 I had another similar issue earlier today: Before take off everything was fine, i got authorization to take off and all but once in the air the comms key wouldn't even work anymore. Only after i landed could i use the comms again. What did i forget? i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
rrohde Posted February 5, 2013 Posted February 5, 2013 I had another similar issue earlier today: Before take off everything was fine, i got authorization to take off and all but once in the air the comms key wouldn't even work anymore. Only after i landed could i use the comms again. What did i forget? Same here... PC: AMD Ryzen 9 5950X | MSI Suprim GeForce 3090 TI | ASUS Prime X570-P | 128GB DDR4 3600 RAM | 2TB Samsung 870 EVO SSD | Win10 Pro 64bit Gear: HP Reverb G2 | JetPad FSE | VKB Gunfighter Pro Mk.III w/ MCG Ultimate VKBcontrollers.com
IonicRipper Posted February 6, 2013 Author Posted February 6, 2013 (edited) Ok i found a solution. I don't know if its a bug or if it was wanted but you can only use the comms with RALT + \ once airborne. EDIT: Just noticed its what Watari was saying. Edited February 6, 2013 by IonicRipper i5 4590 @ 3.77GHz | GTX 1060 6GB | 16GB 1600MHz DDR3 | 1TB HDD+500GB HDD | Win10 Home X64 [sIGPIC][/sIGPIC]
Recommended Posts