Looney Posted March 11, 2015 Posted March 11, 2015 Apparently, after googling it, the 0x07b stop message has something to do with D3D and DX9, try this video for more information: Hopefully you can solve it now. 1 [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
Rossi Posted March 12, 2015 Posted March 12, 2015 Thanks Looney that sorted it and thanks Towsim :thumbup: [sIGPIC][/sIGPIC]
NeilWillis Posted March 12, 2015 Posted March 12, 2015 Thanks Looney that sorted it and thanks Towsim :thumbup: Good news Rossi! If you want to run a test later tonight, we can do it before the session begins. I;ll be there from around 19:15. Neil
Schleudi Posted March 16, 2015 Posted March 16, 2015 (edited) To bridge the waiting time for the next radio version, we have decided to publish a first video of our ATC system. More detailed information will be available in the next few weeks. Schleudi Edited March 19, 2015 by Schleudi [sIGPIC][/sIGPIC] http://ariescon.com Aries YouTube channel
USSInchon Posted March 17, 2015 Posted March 17, 2015 This is one mod that I have really been waiting for.
Esac_mirmidon Posted March 17, 2015 Posted March 17, 2015 Fantastic ¡¡¡ Great ATC software... thanks Schleudi. " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
Chichco Posted March 17, 2015 Posted March 17, 2015 Awesome! +1 [sIGPIC][/sIGPIC] Я не читаю Чижей и прочий зоопарк..
Hansolo Posted March 17, 2015 Posted March 17, 2015 Very nice gents :thumbup: Our ATC's are going to enjoy that. Good job. Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Looney Posted March 17, 2015 Posted March 17, 2015 Sweet baby jezus, I just wet my pants.... Great work, can't wait to get my hands on it! [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
alfredo_laredo Posted March 23, 2015 Posted March 23, 2015 A few questions... 1.-What TS version is recommended? 2.-we are getting this error in ts "Action currently not possible due to spam protection. Please wait a few seconds and try again." 3.- We manually change the quality settings in the congif file to this [soundMod] VHF_AM = 10 UHF_AM = 10 VHF_FM = 10 BkGndStrength=1.000000 and audio quality its much better but when changing slots audio quality goes down... A.K.A. Timon -117th- in game
towsim Posted March 23, 2015 Author Posted March 23, 2015 The minimum TeamSpeak version required is 3.0.14 (64 bit) If the spam message appears permanently, try the following TeamSpeak setting: Right click the Server symbol in the TeamSpeak tree (left window, first line) In the opening dialog select Anti-Flood Set ‘Reduced points per tick’ to 1 Set ‘Points needed to block commands’ to 9999 Set ‘Points needed to block IP’ to 9999 You need administrator rights for your TeamSpeak server to modify these settings. To modify the com quality settings you should use the quality settings dialog only. If you want to go with concert quality you must set the sliders with every mission start. For details see the Radio User Manual on page 25 and followings. The radio versions > 1.973 will hold the settings once defined in the quality dialog. [sIGPIC][/sIGPIC]
HiJack Posted March 23, 2015 Posted March 23, 2015 Set ‘Reduced points per tick’ to 1 Set ‘Points needed to block commands’ to 9999 Set ‘Points needed to block IP’ to 9999 You got the anti-flood system all mixed up towsim. The reduce points is subtracted from the user every second so if you set reduce to 250 on the default settings you basically disables the function. Set ‘Reduced points per tick’ to 250 Don't change ‘Points needed to block commands’ from 150 Don't change ‘Points needed to block IP’ from 250
towsim Posted March 23, 2015 Author Posted March 23, 2015 I will do a test run with different settings to provoke anti-flood. The results will be posted here. [sIGPIC][/sIGPIC]
towsim Posted March 23, 2015 Author Posted March 23, 2015 What I found out so far: First Test environment 2 computers in a LAN first computer drives the TS server and a client second Computer drives a TS client only Connection established with two GossipBoxes Every PTT causes 100000 messages in a loop Test 1 Settings are Reduced points per tick1 Points needed to block commands99998 Points needed to block IP99999 Result No anti-flood message Test 2 Settings are Reduced points per tick1000 Points needed to block commands99998 Points needed to block IP99999 Result No anti-flood message Test 3 Settings are Reduced points per tick100 Points needed to block commands150 Points needed to block IP250 Result No anti-flood message Second Test environment 2 computers connected via internet Server anywhere in Bavaria first computer drives a TS client (weak performance) second Computer drives a TS client (strong performance) Connection established with two GossipBoxes Every PTT causes 100000 messages in a loop Test 1 strong sends to weak Settings are Reduced points per tick1 Points needed to block commands99998 Points needed to block IP99999 Result No anti-flood message Test 2 strong sends to weak Settings are Reduced points per tick1000 Points needed to block commands99998 Points needed to block IP99999 Result No anti-flood message Test 3 strong sends to weak Settings are Reduced points per tick100 Points needed to block commands150 Points needed to block IP250 Result No anti-flood message Test 4 weak sends to strong Settings are Reduced points per tick1000 Points needed to block commands99998 Points needed to block IP99999 Result anti-flood message after 01:30 min Conclusion It seems, that the anti-flood configuration is not the reason for the anti-flood block. In the LAN, it was not possible to produce the anti-flood messages with different settings. With a connection over the internet it was possible to provoke the situation if the weak computer fires 100000 messages in a loop. Vice versa, if the strong computer fires the messages, no anti-flood comes up. The anti-flood seems to be in relation to network speed and performance of the transmitting computer. So finally I have no idea how to set the anti-flood values to prevent the messages. If there is a TS specialist here in the community, it would be welcome if it could be explained how the TS cogwheels are running. [sIGPIC][/sIGPIC]
alfredo_laredo Posted March 23, 2015 Posted March 23, 2015 Thanks for the quick anwser! A.K.A. Timon -117th- in game
Esac_mirmidon Posted March 23, 2015 Posted March 23, 2015 This could help you with your antiflood problems. Link " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
alfredo_laredo Posted March 26, 2015 Posted March 26, 2015 This could help you with your antiflood problems. Link That solved the problem.. Thanks Today tested again with 2 A-10C, 2 Mig21 and a Su25. No issues with flooding. just we all crashed from TS during the mission, we tried several times to reconnect TS and keep crashing.. It took a few tries to make it stable again for the mission. A.K.A. Timon -117th- in game
Schleudi Posted March 26, 2015 Posted March 26, 2015 @ alfredo laredo The horizon calculation has a bug in angular calculations. Since the horizon limitation is not that important for the simulation, we recommend to switch off the horizon feature in the communication quality dialog until a new version is available. Do you have disabled the horizon calculation? The new version 1.976 will be delivered next week. [sIGPIC][/sIGPIC] http://ariescon.com Aries YouTube channel
alfredo_laredo Posted March 28, 2015 Posted March 28, 2015 Yes. Remove horizontal calculation as the game master from ts. But still had several crashes of ts during the mission. Cant wait for the new version. Thanks A.K.A. Timon -117th- in game
alfredo_laredo Posted March 28, 2015 Posted March 28, 2015 And another bug. Using the squelsh switch in the mig 21 creates a constant static (apart from the mig 21 squelsh switch) (you hear 2 different statics) and the problem its one of them just keeps sounding even turning the aircraft off. You need to change slot to stop it. A.K.A. Timon -117th- in game
Hansolo Posted March 28, 2015 Posted March 28, 2015 The new version 1.976 will be delivered next week. Excellent news @Schleudi. Looking forward to it :thumbup: cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
towsim Posted March 31, 2015 Author Posted March 31, 2015 NIKLAS visited my house... Dear Aries user, because of storm damages at my property I can only offer limited service for the rest of the week. I beg your comprehension, TOWSIM [sIGPIC][/sIGPIC]
Snoopy Posted March 31, 2015 Posted March 31, 2015 Dear Aries user, because of storm damages at my property I can only offer limited service for the rest of the week. I beg your comprehension, TOWSIM Sorry to hear about that, glad you're okay! v303d Fighter Group Discord | Virtual 303d Fighter Group Website
R34P3R Posted March 31, 2015 Posted March 31, 2015 Take care, hopefully not too much damage. [sIGPIC][/sIGPIC] I5 3570K @4.2ghz | ASUS P8Z77-I Deluxe | Intel® Thermal Solution RTS2011LC | G.Skill Ares 8GB DDR3-1866 CL9 | MSI N760 2GD5/OC ITX| 2x Corsair CSSD-F60GBGT-BK | Western Digital WD10EALX 1TB | HOTAS Warthog | TrackIR 5 | Win 7
Recommended Posts