Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 I am talented in the ways of the Force ;) Know when and for how much they will be for sale mate? J. Within the next couple of days I will start making them, Some of the panels you require I already have drawings for, the other I have to do. I will post them on here for you to view first. Hi Mate I take it you mean the holes that I asked not be to cut! If they are for the backlights, then great, but I wont be using backlights at all. Not for my first build. Appreciate your knowledge though! No actualy I was answering your question if some one could tell you what the holes are for . I did they are for back lighting the panels!! oh by the way there is no need for all the !! points Get te panels made how ever you would like In my humble opinion not getting tem made so the can be back lit on way or another is a waist of monet but hey its been done before. Just to make you aware the engraving of the text is designed to be back lit. but you can use it without of course. http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
marker Posted June 27, 2013 Share Posted June 27, 2013 Thanks Deadman, i'll use as many !!!!! as I care to!! Thanks :) Glider, if I want to back light it, I can install a few leds inside my case and have an external switch for that. Carry on without the hole spoken about earlier please. Thanks. 1 “Any pilot should be flying the spitfire, at least once.” – John S. Blyth Link to comment Share on other sites More sharing options...
Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 Thanks Deadman, i'll use as many !!!!! as I care to!! Thanks :) Glider, if I want to back light it, I can install a few leds inside my case and have an external switch for that. Carry on without the hole spoken about earlier please. Thanks. Will do Marker http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
mr_mojo97 Posted June 27, 2013 Share Posted June 27, 2013 Glider mate, I take it the UFC can be back lit as well? When is the production on for these - looks groovy so I'll have one. How much inc postage to UK? Ps don't suppose you can do enclosures as well can you? Ta MSI M5 z270 | Intel i5 7600k (OC) 4.8GHz | MSI GTX1080ti Gaming X 11Gb | 500gb Samsung 970 Evo NVME M.2 (DCS World) | 500gb Samsung 850 Evo SSD (OS and Apps) | 32Gb 2400MHz DDR4 - Crucial Ballistix | Be Quiet Silent Loop 240mm | NZXT H440 case | Thrustmaster Warthog - 47608 with Virpil Mongoose joystick base | MFG Crosswinds - 1241 | Westland Lynx collective with Bodnar X board | Pilot's seat from ZH832 Merlin | JetSeat | Oculus Rift S | Windows 10 | VA | Link to comment Share on other sites More sharing options...
Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 Glider mate, I take it the UFC can be back lit as well? When is the production on for these - looks groovy so I'll have one. How much inc postage to UK? Ps don't suppose you can do enclosures as well can you? Ta I will be making an enclosure for all panels if requested including the UFC also eventually USB electronics so if wanted each panel can be a standalone usb device or 3 panels in one device, whatever is required. Production starts in 2 days. I will message you direct with cost and delivery in a day or so. Regards Glider http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
MTFDarkEagle Posted June 27, 2013 Share Posted June 27, 2013 Looking cool Glider! Regarding the UFC: Will you be making a UFC front (including buttons) and PCB with switches on it etc.? Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread Link to comment Share on other sites More sharing options...
Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 Looking cool Glider! Regarding the UFC: Will you be making a UFC front (including buttons) and PCB with switches on it etc.? Yes that is the plan, my electronics chap is working on just that. I am not promising it will be available soon but we are working towards it. To be honest I will produce all the devices how I would want them myself, reliable, sturdy and easy to use. That said I know that alot of people like to produce the devices themselves and just require the panels. I intend to produce items from single top panels to top/spacer/clear panel set or an entire device. This will take time on the electronics front but I am happy with the intial work of producing panels for people like myself who enjoy the hobby. http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
MTFDarkEagle Posted June 27, 2013 Share Posted June 27, 2013 Excellent!! Will be keeping my eye on that ;) Lukas - "TIN TIN" - 9th Shrek Air Strike Squadron TIN TIN's Cockpit thread Link to comment Share on other sites More sharing options...
Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 (edited) Hey Glider, Whats the chances of an A10C AHCP, Electrical Power, Landing Gear and panels and the front fascia for the UFC? I'd pay up front for those if you're willing to produce them. I can even supply PDF's of each of the A10C panels if that's any help to you? J. Check the drawings and get back to me please. Edited June 27, 2013 by Glider_UK http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Ells228 Posted June 27, 2013 Share Posted June 27, 2013 Am def interested for BAE Hawk panels for our projects. Need something similar to the one we had done for Breitling centre console: http://youtu.be/hIOQJ43yt_E Link to comment Share on other sites More sharing options...
Glider_UK Posted June 27, 2013 Author Share Posted June 27, 2013 Am def interested for BAE Hawk panels for our projects. Need something similar to the one we had done for Breitling centre console: http://youtu.be/hIOQJ43yt_E Great vid. I will be happy to make panels for you. Do you have any accurate drawings. If not dont worry I have a lot of reference material for the hawk. Regards http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Ells228 Posted June 27, 2013 Share Posted June 27, 2013 Accurate panel drawings used to produce our 3d model yes. Ill get in contact vie email if ok as easier to chat that way. Send me an email to ells@veao.eu and ill get back to you with some thoughts. Cheers, Chris. Link to comment Share on other sites More sharing options...
Deadman Posted June 28, 2013 Share Posted June 28, 2013 Hey no problem Glad to answer your question any thing to help a fellow cockpit builder out!!!:thumbup::thumbup::thumbup::thumbup: Thanks Deadman, i'll use as many !!!!! as I care to!! Thanks :) Glider, if I want to back light it, I can install a few leds inside my case and have an external switch for that. Carry on without the hole spoken about earlier please. Thanks. https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Glider_UK Posted June 28, 2013 Author Share Posted June 28, 2013 First production sheet This the first sheet drawing. I will post pics of actual panels tomorrow. http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Ells228 Posted June 28, 2013 Share Posted June 28, 2013 Looking good there mate Link to comment Share on other sites More sharing options...
Glider_UK Posted June 29, 2013 Author Share Posted June 29, 2013 radio stack Last drawing before I start making them today Radio Stack http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Deadman Posted June 29, 2013 Share Posted June 29, 2013 NO real reason to make the AN/ARC 210 when it is not used in the sim but it is a cool control head https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
agrasyuk Posted June 30, 2013 Share Posted June 30, 2013 NO real reason to make the AN/ARC 210 when it is not used in the sim but it is a cool control head i think it will be quite possible to use that . i did not have a chance to work on it yet, but i was thinking something in line of small screen (3" or so ala CDU) , generating labels for it in helios. inputs connected to arduino so there is a way to "translate" the input programmatically into existing bindings . it will not be a replica, but entering frequencies with that should be fun... Anton. My pit build thread . Simple and cheap UFC project Link to comment Share on other sites More sharing options...
JaseGill Posted June 30, 2013 Share Posted June 30, 2013 Check the drawings and get back to me please. Looking good mate. Count me in. Let me know how much and how/when you need payment just let me know by PM. Youre a star. Cheers. J. Rig: Home Built, water cooled,i5 2500K @ 4.3Ghz, ASUS P8P67Pro Mobo, 8GB Patriot Viper 2 Sector 5 RAM, MSI Nvidia GTX970 4GB Gaming OC, 120GB OCZ Vertex 2e SSD Boot, 120GB OCZ Vertex 2e SSD Games (BS & WH), Samsung Spinpoint F3 1TB other, Samsung UE37D5000 37" LED TV,EloTouch 1600x1200 secondary, Thrustmaster Warthog No.467, Thrustmaster MFD, Saitek Pro Pedals, Track IR4 with Track Clip Pro. Ex RAF Aircrew, Real Life Pilot, proud Geek and father of one :) Link to comment Share on other sites More sharing options...
marker Posted July 1, 2013 Share Posted July 1, 2013 Hi Glider Just curious for an update mate! Thanks “Any pilot should be flying the spitfire, at least once.” – John S. Blyth Link to comment Share on other sites More sharing options...
Glider_UK Posted July 1, 2013 Author Share Posted July 1, 2013 Hi Glider Just curious for an update mate! Thanks I am doing a run today, I was hopeing to do a run over the weekend but my delivery of sheets did not turn up when they said it would. I will PM you once I have done the first of your panels with prices. I promise they will be on there way to you by the middle of this week. I will also PM you my email so you can contact me at anytime. Regards Glider http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
JaseGill Posted July 1, 2013 Share Posted July 1, 2013 Hey Glider, Thanks for the update. Can I be a real pain in the arse and ask of your planning on doing the Gear Panel at all? I have TomDK's Landing Gear Handle sitting awaiting a home is the reason I ask. Thanks again for all the work, J. Rig: Home Built, water cooled,i5 2500K @ 4.3Ghz, ASUS P8P67Pro Mobo, 8GB Patriot Viper 2 Sector 5 RAM, MSI Nvidia GTX970 4GB Gaming OC, 120GB OCZ Vertex 2e SSD Boot, 120GB OCZ Vertex 2e SSD Games (BS & WH), Samsung Spinpoint F3 1TB other, Samsung UE37D5000 37" LED TV,EloTouch 1600x1200 secondary, Thrustmaster Warthog No.467, Thrustmaster MFD, Saitek Pro Pedals, Track IR4 with Track Clip Pro. Ex RAF Aircrew, Real Life Pilot, proud Geek and father of one :) Link to comment Share on other sites More sharing options...
Glider_UK Posted July 1, 2013 Author Share Posted July 1, 2013 Hey Glider, Thanks for the update. Can I be a real pain in the arse and ask of your planning on doing the Gear Panel at all? I have TomDK's Landing Gear Handle sitting awaiting a home is the reason I ask. Thanks again for all the work, J. Thats not a problem I thought I had shown you the drawing but looking back I missed that one, apologies. I will complete the panels this evening, I will PM you. Regards http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Glider_UK Posted July 1, 2013 Author Share Posted July 1, 2013 Hey Glider, Thanks for the update. Can I be a real pain in the arse and ask of your planning on doing the Gear Panel at all? I have TomDK's Landing Gear Handle sitting awaiting a home is the reason I ask. Thanks again for all the work, J. I have not painted the edges yet, I will do that in a bit. I will PM you later this evening. Regards http://www.modeldesigns.co.uk Mobo Asus Maximus XI RAM:64GB DDR4 CPU:Intel I9 9900 Nvidia 2080TI WIN10 64Bit HP Reverb Link to comment Share on other sites More sharing options...
Deadman Posted July 1, 2013 Share Posted July 1, 2013 so how much is one of those? https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Recommended Posts