All Activity

Это работает в обе стороны. Есть модификации на свежие кабины. Они проверку в сетевой игре не проходят, но кого это волнует? "Не говори мне - я не скажу, куда идти; пути врозь идут."

Negative dude. You have 3 waypoints near the main targets and they are static, a precision and smart weapon like the CBU-103 is a great fit. In fact, IR Maverick / JDAM / JSOW / WCMD / HARM all make sense for this DEAD mission. (Of course, the real limitation is just what guided munitions are available in the mission's inventory at Akrotiri, that's out of my hands LOL wwwww) You'll know how to handle the SA-8 threat, if you completed the First in Weasels over Syria. Good luck!

Hi all, Glad to see there are some good stories about the Pimax Crystal Super. Unfortunately for me, the story so far is not great at all. I pre-paid for my Super in November 2024, and after several broken promises in timelines, I finally got my supper by end of July 2025. For me, it was crystal clear (pun intended) that there was something VERY wrong with my headset. The visuals were rather poor, and when looking at the Sky in DCS I could really see a tiny tiny very little "grid" or "mesh", which of course killed any experience immersion. Like Mura, but a case of critically bad Mura as I could see this tiny grid. After about 2 or 3 weeks of ford and comes, sending photos, videos and log files, Pimax finally agreed on sending me another engine. But that would take 1 or 2 months they said, so I would expect to receive the other engine by end of September 2025. Not great after spending a large amount of money on this, so I am afraid that so far my experience with Pimax quality has been rather poor. They are good on replying quickly though, so at least something good out of this. I now have to wait for quite a while before being able to check if all the videos I have seen on Youtube about the "waaaoo" experience are true or not. I just really hope the new engine is up to the visual standards a good number of youtubers say. Thanks! PS. Anyone is aware of a "competing" VR headset? Just for in case the Super keeps providing disappointments?

Тем более, если труда не составит, то и платить за это не надо, а желающий жирных куриц будет решать это отдельно. Например, модами.

The amount of trim you get with one click on the trim button is way too fast. Thats why you cant get the F16 trimmed out perfectly, nor can you bring the trim back to neutral, because of the sensitivity of the input you just overshoot the perfect trim value. A trim reset is a good workaround, and or reducing the speed of the trim input per click would be the realistic way to approach it.

CT will have a laser range finger, for a better AG accuracy. Corail pod panel, updated weapon selection panel, better integrated RWR and the abiliy to use GPS for navigation. CR would be a great add, if it could be possible to add the aerial photography to DCS, so it would be possible to make aerial reconnaissance, and make the game more interactive. But In my mind this function is more on the side of ED as AERGES. But as told it's maybe for those versions CR/CT. It's more a wish than a planned version from AERGES.

I did not want to spoil too much. Its an escort. Great contrast to missions one, two and three but thats how it was back in the days. Realy great immersion!

Адепты чистых кокпитов могут проделать то, что сказал Шварцнеггеру один из главных персонажей "Красной жары". Для них это решительно не составит никакого труда, в отличие от какой-то курицы на плёнке.

Утка жирнее. И если визор то лучше на себя плёнку наматывать. Кокпит и фонарь должны двигаться вместе с картинкой. Там плёнкой не получится.

You can install DCS on as many computers as you want to. But it can only run on one computer concurrently, hence the log in. You can either install from scratch via downloader or just copy the whole Program Files\Eagle Dynamics folder to the new computer. To keep log book and settings, copy the DCS folder under Saved Games. To keep keyboard/peripheral bindings, there's a script around that will rename all your diff files correctly. Cheers! Sent from my SM-A536B using Tapatalk

is the fact that you are posting this tournament an indication that it is open ot all? or is there a qualifying session?

I purchased a new system. Still have the older system and it has all DCS software. How to proceed? I would like to have all my DCS software on the new system. Can I download all from DCS portal to the new system without some kind of conflict? I really do not want to copy everything from the older system to the new. I will delete all DCS from the older system and install newest MS FLTE sim and IL2, and put DCS on the new system. Another thought, I want to install all my controller software on yet another system and have it integrated with the new system. So in effect there will be two computers running different parts for DCS. Will this work? Thanks, Laz

I aborted the mission on my first run because I didn't confirm that the coordinates (by TGP) were on the target before pickle the CBUs. As a result, I missed the two SA-2s. The wingman's 1 HARM also failed to hit SA-6, causing the opponent to shut down and restart when the strike package was ready to push. Meanwhile, the wingman and I had already winchester. The SA-8 isn't a real threat to me. Its radar shows up on my RWR and HAD, which helps me stay outside of its MEZ and easy to evade. The main problem is the low visibility from the clouds, I'm hesitant to descend because I'm worried about undetected MANPADS popping up and taking a cheap shot. Retry. I got a 99 on M3 last night, I have no idea why I lost that single point, maybe I was just too tired LOL. There's nothing to care about. --------------- With that first experience under my belt, I was confident enough to fly below the clouds and use my TGP to confirm and correct the positional error between waypoints (9, 10, 11) and main targets. I even adjusted the CBU-103's spin rate and burst altitude to maximize the area of destruction, knowing that hitting the target would trigger a secondary explosion. (thanks for the bonus, ChillNG LMAO) YGBSM! Let's go M4!

Nice work! [emoji1319] Sent from my SM-A536B using Tapatalk

Пускай делают также, как и остальные - относительно новым кокпитом. Адепты "засранности" кокпита могут обернуть монитор пищевой плёнкой, закрепить это парой резинок, взять самую жирную курицу и привести визуальную составляющую в родной для них вид. Даже не будет особо понятно - так засран кокпит, фонарь или визор.

Yes, I got mine used too, and I've already heavily modified it. I removed the USB cables and replaced them with female USB ports, so I could just unplug them from the front and remove them, like the Winwing ones. I replaced the pinky switch, the china switch the Slew cursor and the AP grip button, and I think I need to replace the brake and the autopilot switches as I think they are starting to fail.

Надо просто понимать, что покупка любого модуля может привести к не запланированной "тыкве" без компенсации и иметь это ввиду при их покупке.

I get this issue too, changing between narrow and wide XR modes with the pinky switch. Just a little nudge on the cursor in any direction and only then will it actually start the XR processing in the other fov. I'll try to get a track later today.

Sorry. I meant your headset. I see that you are using VD and have PD at 1.1 in DCS. What setting do you have in VD? Godlike?

So, you have both a physical issue and issues in the sim? I got my Warthog second hand, and have had to replace at least one switch. Sent from my SM-A536B using Tapatalk

The MiG-29 has a SNP-2 (TWS) mode for firing at 2 targets. However, the radar captures the target at STT. Which shouldn 't be the case . Since such a guidance principle is not possible for the R-77

This means we are getting the improved code for RWR systems right? Since it is the same device. Ty

I don't think doing it slowly will make a difference. Latching switches have that phenomenon where nothing is happening, then at some point you apply enough force that it latches into the new position immediately. I don't remember it, but it has a name. I don't know, it may as well just be a faulty one. I'm tempted to gut it and replace all the electronics with my own. I'm already familiar with DIY gaming devices, so it shouldn't be too dificult.

I just built 9 rigs with B850 chipset with Gigabyte boards and 9600X for office use tho, 32GB 6000MT and a 1TB 990Pro. Solid rigs and the board has all it needs if you stay in normal boundaries. If you don't need the extras 870 has, 850 is a solid choice and about half the price.

I realize this would be incredibly low in the priority list. But it would be super cool for training campaigns to shoot at towed dart targets instead of peppering real planes. I don’t know if it would just be a matter of doing the 3d model and using a physical model similar to the refueling basket or if it would need to be done from the ground up.