All Activity

Hi @Polonsky Will take a look when I get to my rig. Are you running any mods?

You can disable framerate-limit of mirrors in the graphic options. Does this not work?

First,just do the overhead turn at 350-400knots. This part is normal. Then, let’s split downwind part into 2phase. Phase 1. 180-190knots and try to get level flight. Don’t slow down too much. 180-190knots will give u plenty of lift to get level easily. Phase2. That’s the tricky part. U need to hold the nose Steady and slow down to on speed aoa. Aoa can be affected by 2 factors, throttle and trim. When u push up the throttle aoa will decrease.When u move ur throttle back aoa will increase. So u need to hold ur nose steady to tell which part u need to change: if nose goes down or up then aoa is mostly changed by trim. U need to trim ur plane out. If nose is steady but aoa is changed then u need to move ur throttle. Before the base turn u need to find that balance of throttle and trim—— nose steady and aoa on speed. During the base turn, u can still use this method to get on aoa or slightly fast. when u finally on the final approach, u need to firstly aim for a proper decent rate. dont rush to get on perfect aoa again. Ur trim is ok don’t change that too much since u already trimmed out during downwind. Slowly move throttle to get aoa on speed. The method stay the same. If nose is not steady and aoa is not on speed , do trimming. If nose is steady and aoa is not on speed, do ur left hand job. When u are 50ft above the runway,flare.( at this point aoa will decrease since the ground effect. U can use that as a sign of flare moment.) u need To throttle back slowly now. Otherwise, u will level up and land long. But don’t move it too fast or hold back stick too much, don’t go beyond on speed aoa. Do it this way , u don’t need to go in fast and still can make ur backseat ugly guy scream and admire u. Hopefully, this method can help someone who love f-4 but hate jester’s mean landing comments.

Thanks i manage to fix it. Hello mates. I want to make a panel with blacklight which i can control it with DCS bios. i will use a 4CH MOSFET. I take an example the Heuy Overhead Console Panel Lights Brightness. -I need as input: DcsBios::Potentiometer brtConsole("BRT_CONSOLE", PIN); -And as output: void onBrtConsoleChange(unsigned int newValue) { /* your code here */}DcsBios::IntegerBuffer brtConsoleBuffer(UH_1H_BRT_CONSOLE, onBrtConsoleChange); I need some help with the output. Where is should place it in the sketch?

Sorry to hijack this: How do you get the name of the map object in the first place? Is it a function of the "zone" object?

I had no idea which section to post this in, I tried GFN's forum but got no replies, so I'll try here instead. Does any one here who plays DCS on Geforce Now know a way to save/restore control bindings between sessions? I don't think there is a way tbh, so I won't likely be wasting much time with Geforce Now. Its garbage imo.

If i remember correctly, different tasks can vary in priority. So if you create multiple advanced AFAC tasks with different attributes, you should be able to rank priority based on the order they appear in the units task planer window.

Can't we disable them in the same way as HUD and MFD?? This is a real problem, the dots are not visible while moving.

Can't switch to wingman view with F2 upon landing stage. I've checked the log of the wingman and no sign of KIA, the last known action is take off. Looks like it disappeared out of no reason. Test with the normal version of the campaign. Mixing up with the Locals Wingman Missing.trk

Совсем не знаток, но у меня тоже не работает передача между РЛПК и ОЛС в режиме Взаимодействия (COOP). Я так понимаю, что еще не реализовано как должно быть (ну или мои кривые руки). Здесь пишут, "когда будет полностью реализовано":

It's not stuttering, rather, the mirrors seem to have a hardcoded very low refresh rate, presumably to minimize the overall framerate hit that the mirrors produce. Unfortunately there's no way around this. I really wish both mirror resolution and refresh rate could be set by the player rather than hardcoded! I find the low resolution, low refresh rate mirrors very distracting and immersion breaking -- not just in the MiG-29 but across all modules.

...sofern man die Ergebnisse gegencheckt bevor man handelt. Blind verlassen würde ich mich auf KI-Ergebnisse nicht. Die zitieren auch gerne mal aus uralten, völlig bescheuerten Reddit-posts. Aber um einen Überblick zu bekommen sicherlich legitim.

I have stuttering in the mirrors only. Anyone else also see this ?

Noch ein heißer Tipp an alle die den Wald vor lauter Bäumen nicht sehen. Ich habe vor Zeit festgestellt, dass Chat-GPT einen außerordentlich guten Job macht, einem einzelne Features zu erklären, sowie anhand einer im Vorfeld aufgestellten Prioliste verschiedene in Frage kommende Mainboards (oder andere Komponenten) aufzulisten und zu vergleichen. Man kann auch die Prioliste selbst anhand des Anforderungsprofils mit Chat-GPT erstellen und Analysen von Benutzerreviews erstellen lassen. Im Prinzip ist das ja nur ein Sammeln von Daten und Auswerten von Informationen. Darin sind KI Assistenten recht gut.

Шикарные кадры, спасибо)

Dunno, the manual just says that the sensitivity is 150% of max range of the illuminator.

Thanks for testing this out, Rudel! Lets hope someone at ED (or ORBX?) see this. @BIGNEWY

Wenn die Specs passen sollte das problemlos gehen. NBB ist der Verkäufer und auch für B-Ware sind sie in der Gewährleistung. Da hier rein optische Schäden deklariert werden, ist es ein gutes Angebot. Ich habe aber jetzt nicht das Mainboard dahingehend geprüft, ob es deinen Anforderungen entspricht, das musst du bitte eigenverantwortlich machen.

there has been an 'engine cooling' update about a year ago, or more, not sure if you haven't flown for that long. For the most part if you stay within the advertised engine regimes there's not a lot of 'bugs' that pop-up. However, if you start firewalling the throttle (even for very short periods of time) the answers to the questions such as "why did this fail?" become pretty elusive. That's DCS for you.

Actually, when I'm looking to the side to my wing tip. The missile is mich bigger than an Aircraft 1 NM away...... I can't really follow that argument. But hey, I've no clue. It's possible that you are right.

In MSFS and Xplane you're able to sync up your table on apps such as foreflight or Garmin pilot to see the aircraft and charts like a situational awareness app. It would be incredible if someone could figure out an ATAK plug in that allowed the same type of functionality. This will allow you to mission plan, have a moving map display of imagery, measure accurate distances from ground forces, have more information like phase lines and GRGs, and much more. ATAK is a free app made by the government and is only available to android users so no apple products unfortunately. But the capabilities for situational awarness atak brings is really cool and it would be amazing to use in DCS.

I need help to find the template folder for installing the mod. Where is it? Thank you.

Подскажите, знатоки. Немного запутался. Как должна выглядеть совместная работа РЛПК и ОЛС? Вчера экспериментировал. По идее, при включенной совместной работе, сначала хватает ведущий канал. И он выдает куда смотреть ведомому каналу. Когда схватил ведущий и ведомый они ведут совместно. Если один теряет, то второй поддерживает захват. Однако. ДВБ с ботом на Хорнете. Встречные курсы. Пуск Р-27 с дистанции где то километров 15. Бот ставит на 3-9 (маневр ночь) где то на удалении километров в 5-7 на форсаже. И РЛС его теряет. Захват срывается. Р-27 улетает по своим делам. То, что при ночи РЛС теряет захват не удивляет. А вот то, что разницы нет совсем между режимом совместной работы с ОЛС и без него (во всяком случае я этого не заметил) несколько удивило. ОЛС его не видит при таких то параметрах? БВБ. Тот же бот на Хорнете. То же самое. Исходил из того, что РЛ или ТП в случае подключения второго канала в режиме вертикального сканирования отображают ведущий канал. Но, опять же, никакой разницы по качеству сопровождения целей в БВБ отметить не смог. Это баг, или я чего то не понимаю. Правда полетать удалось немного. Чуть больше часа. Может и не увидел чего.

https://store.steampowered.com/app/3824490/Oasis_Driver_for_Windows_Mixed_Reality/ il creatore dei OpenXR ha sviluppato free, su piattaforma steam, dei driver chiamati Oasis, che riportano in funzione tutta una serie di VR che lavoravano solo con WMR. Installando steam e scaricando i driver, si effettua un "unlock" del visore/controller e a quel punto il visore diventa "nativo" per SteamVR, funzionando direttamente con quello. E' il modo con cui io sto' usando il mio Reverb G1, con grande soddisfazione. Funziona? Eccome! Pure meglio, non avendo più WMR come passaggio intermedio.

Download the updated campaign from here Operation Piercing Fury V1.52