Jump to content

marzzz

Members
  • Posts

    44
  • Joined

  • Last visited

Everything posted by marzzz

  1. Hi F16 air refueling is really hard for me, maintain a good and stable position under the tanker is an f... challenge especially in VR. Is it possible to have an overlay to show us the pilot situation lights of the tanker like the FLOLS in F18 for the carrier landing ? Thanks
      • 1
      • Like
  2. perfectly clear same problem and already reported bug or realistic logic ?
  3. hi the bug of the UFC radio - cold start isn’t solved yet …. could we hope ?
  4. So This is a track replay (FLIR on Left DDI and A/G radar mode sea on Right DDI , with a ship target) 1 - Sensor switch right - create a TGT with the A/G radar (TDC depress) - a designation cross appears 2 - Sensor switch left - move the TGT with the FLIR - the designation cross on the A/G radar page, moves 3 - Sensor switch right- back the the A/G radar page and move the TDC on the target ship 4 Try to make a GMT track on the target ship (sensor switch right ), it doesn't work 5 TDC depress on the target ship : no designation cross (??!!) but now it's possible to make a GMT track with sensor switch right 6 Sensor switch left - back to FLIR page , the designation cross is now on the target ship I would have thought that the TDC depress would create a new designation cross GMT test.trk
  5. Hi working on A/G radar- ATFLIR combo, i noticed a strange behavior with the radar when a TGT exists , a designation cross is present on the A/G radar page. right But if i make a TDC depress on an another target with the radar , no designation cross appears. however, a TGT seems to be validated in this case. Proof , the GMT mode track works on the second target ( sensor switch) I think that the missing designation cross is a bug what do you think about ? ( Ps : if i undesignate before validate the second target , it works perfectly) Thks
  6. thanks for your post, bones i globally agree with you and it’s quite logical. but with my own tests , the MAVF follows the GMT track . And in this case , the MAVF update is automatic, you don’t need to TDC undesignate/redesignate
  7. yes it’s true , Mav E works well with ATFLIR auto track but with ground radar too. it’s not the case with with Mav F
  8. Hi i’ve noticed that an uncaged Maverick IR (AGM65-F) couldn’t follow a moving target designated by a ATFLIR pod (Auto track mode) while it works perfectly with the GMT/Sea ground radar. The only solution i’ve found is to uncage the maverick just before the launch ( inside maverick range , of course) 1- I don t understand why? is it a bug? 2- my feeling is that Auto mode of the ATFLIR is not very useful ( i didn t try the litening pod). So, except a bug, the best combo seems to be ATFLIR pod slaved to the ground radar , even with the AGM65-E (laser). What are your feelings about it ? thks
  9. same problem for me. Tried with the instant mission fighter intercept. Strange thing, TMS right works the first time i played the mission. And after TMS right is broken
  10. mods ? i am using SRS and tacview , nothing else i have the memory that with the F16 , i pointed a strange thing. i reported before i will send you my dcs.log tomorrow
  11. Hi These are 2 tracks on open beta , one test with VHF and one test with UHF Thanks test UHF.trk test VHF.trk
  12. ok i checked when i set the wrong position, the comm works but it is bugged ( ok for text but the voice is breaking) another strange thing when i put the fm radio on homing position , i can still communicate with the tower (fm radio) normal ?
  13. ok i will check it
  14. i know , i forgot to say that « easy radio » is disabled on my dcs
  15. Hi i’ve just discovered the huey . i notice that the position of the intercom selector switch doesn’t change anything. For example , i can communicate with the tower during a cold start with the VHF AM receiver , even the intercom switch is on PVT, INT , 1,2 positions. The VHF AM should to work only with the 3th position of the switch. is it a bug ? Thanks
  16. Hi guys i use the stable version. i ve just noticed something with ATFLIR. in INR mode , when i undesignate i go back to the snowplow mode. in scene or track mode , when i undesignate i go back to a pseudo INR mode without TGT. I don’t remenber how was the behavior before last updates. I think that it would make sense that undesignate from scene or track mode leads to snowplow mode Bug ? Thks
  17. i misspoke when i want to boresight the maverick. I don’t see any difference if 1 enable or not the jettison ground switch 2 put or not the arm switch on simulate I don’t think it is normal
  18. Hi For the boresighting procedure on the ground, i saw that we had to : 1 enable the jettisson grd switch ( to override the wow switch ) 2 put the master arm switch on sim Otherwise, the maverick MFD doesn t work Actually , if i don’t respect that , the maverick MFD still works ! and i see no difference bug ? thks
  19. hi i know that term settings work with gbu 38 But i’m not sure that the izlar cue actually works with Jdam term parameters I think that izlar cue will only appear when the aircraft is in the direction of the term parameters For now , wathever the term parameters ,the izlar cue appears from the moment the aircraft is in the line of sight of the target
  20. Hi i would like to know when the terminal parameters for the jdam and the loft/auto release will be available Specialy the izlar cue Can we expect a release soon ? thanks
  21. My english is poor so it s difficult for me to explain my thougts.. i just tried to understand the logical of the wep choosing station So to answer your question , yes it works Ps: what was the problem that the update solved Corrected SLAM-ER / DL13 unlimited munitions error. thanks
  22. Hi in fact i’ve made a mistake …. i have configured the distance for only one slam … so ok it works But same remark that before Choosing the station on wep option seems to be useless ( ok ,however it activates the link) Finally i think choosing the station in wep option is just a shortcut in order to rapidly have the right channel on the AWW 13 video ( rather using ufc panel ) Right ? thanks
  23. is the ATC approach necessary before using ACLS mode 1 ? thks
  24. Hi Today since the update ,i tried again with 4 slam ER and AWW13. Impossible for me to link the AWW13 ( no video feed back ) except for the last Slam ???!!!! I tried different scenarios ( link before and after weapon release ....) I don't understand What did i do wrong ? Thanks
  25. thanks ivanK
×
×
  • Create New...