Terrorvogel

Good to know that with that trim reset cheat! Seems i have overlooked that HMS Switch:doh: Thank you for fast and informative reply! Regards Terrorvogel

Hi to all, in manual i can only find the trim button at cyclic but no trim trim reset. Where is this button in reality? Same to Helmet Mounted System. I assume that you have to fold down the HMS device of your helmet by hand in real so there is no button for that. If that were so, i could integrate a little switch/momentary into my headphones to fold down HMS to make it more real. Regards Terrorvogel

I played with curves in BlackShark joystick settings and the G940´s motor-steps were only accurate when in: DCS Joystick settings: Deadzone: 0 SaturationX: 100 SaturationY: 100 Curvature: 0 Logitech Profiler under X/Y Axes: Sensitivity: 0% Deadzone: 0% Range: 100% But if changing curves to my needs in DCS (because i don´t want sluggish Saturation at 100 only to have a working FFB-trim), there are no more "fine" motor-steps possible when hitting the trim button. It seems there are only one maybe two possible positions (motor-steps) per axis if changing curves´s saturation and/or Logitech´s sensitivity!!! There must be an issue especially in Black Shark Module itself in combination with Logitech G940 because in A10 module trim is working absolutely fluid in fine steps. So whats the problem here??? Is every G940 user happy with the trim? Has someone of the G940 owners changed the joystick-curves and no issues with that in combination with FFB-trim? Regards Terrorvogel

I did a completely new install and made all joystick settings from the scratch. Is it possible that somthing was left of old installations, which can make problems like that? I had BS1 fullversion and Upraded later to BS2 and now running DCS World. Is there any .lua in which i can check/compare, if theres something wrong with FFB parameters? In BS1 trim worked as it should and now its horrorbly to fly. Regards Terrorvogel

Works!:thumbup: Thank you S77th-ReOrdain! Regards Terrorvogel

I´m having exact the same issue running DCS WORLD 1.2.0 with my G940 and can confirm. I already disabled the "Enable Centre Spring in Forcefeeedback Games" in Logitech Profiler and in DCS Black Shark Joystick Profile i have set FFB-Shaking to 0. Like P1KW in this thread http://forums.eagle.ru/showthread.php?t=81144 i´m wondering too, why the trim in A-10C works without problems. In A-10 it is possible to trim in very fine "steps" with FFB. This is really great! So the issue must be only in DCS Black Shark part somehow! BlackShark does not get the right position of G940 so trim is onfortunately absolutely not usable with this Logitech. There are no steps. If pressing the trim button, the joystick moves full forward with one big hit, for example, instead of holding the preffered position. Same happens to all sides. I already played arround with axes and FFB sensitivity and strenght. Changes nothing. I will be very happy of every hint to solve this to get more immersion to the sim... Regards Terrorvogel

Great Job! Big thx! It´s much more real now... Regards Terrorvogel

Where to put the mod´s INTERLEAVE.bmp into DCS World 1.2.0? Can´t find it in C:\DCS World\Bazar\TempTextures Regards Terrorvogel

Can´t wait...

Does someone know where to change the instructions-position-window at beginning of mission and the VMU warning annoucment messages? Is this possible at all? Regards Terrorvogel

It was a little bit unlucky written of me because i'm lying in bed with big flu so my mind is a bit weird. Sorry for that! It is right that the flickering is gone with this settings. This settings are not the trouble maker of course! Big thank you for finding out the bug/incompatibility with my driver/card! I will play with drivers if i'm fit enough again and write here if it worked. Regards Terrorvogel

With your great help, it turns out that this one is the trouble maker:compatibleVB=1. I played arround with SoftTH switches but unfortunately i didn´t really get out the former performance with compatibleVB=1 enabled:( What exactly version of latest older Nvidia driver could you reccomend for me to try out (best possible performance/compatibility also with newer games)? Regards Terrorvogel

Thx for fast reply PeterP! I tried your settings and flickering is gone but i have a performance loss now (about 5-7 FPS). Sounds not much but if having in some missions a max of 18 fps it DCS will be unplayable :( What can i do to get my 5 fps back without damn flickering? Seems you are on the right way... Regards Terrorvogel

+1 Regards Terrorvogel

Hi guys i really need help, i´m suffering now for a long time under heavy flickering since DCS World 1.2.0.63205 and i can´t find a solution. This is making me really mad... The videos are taken at mission Battle.miz in which is especially bad flickering. http://videobam.com/HtjyZ http://videobam.com/dLHmy If running wihout SoftTh in windowed mode, the flickering is gone. What else can i try? System: Win7 Ultimate, GTX 580 3GB @ Matrox Triplehead2Go Digital, Driver 301.42 (same issue with 304.79 and 301.24) SoftTH208balpha_x64 Regards Terrorvogel graphics.cfg config.SoftTHconfig.rar

Hi Leute, ich hab seit DCS: World 1.1.2.1 ein seltsames und nerviges Flackern der o.g. Grafiken (siehe http://www.vidup.de/v/CfzY9/). Das ist teilweise sehr ausgeprägt und lenkt total ab. Mit den "alten" DCS Modulen läuft es einwandfrei also muss sich irgendwas in dieser "Abteilung" geändert haben. Hab nix weiter am System verändert und folgende Treiber ohne Änderung des Problems drauf: Nvidia 301.42 Nvidia 304.79 latest Beta Hat jemand ne Idee? Gruß Terrorvogel

AH-64D Longbow: - With switchable positions during flight so KI is taking over the other part if wanted. - Multiplayer support for playing both positions online would be great... Regards Terrorvogel

Harrier Jump Jet in Falkland Battle environment would be great. Will be a totally different new flight experience compared to other boring standard planes...

Great Work! Thank you for that! Regards Terrorvogel

How about to finally finish full SIOC support for the UV-26 dispenser system in next patch, to use "real" 3-Digits by opencockpits-hardware for example. I´m talking from outputting the right calculated amount of remaining flares with SIOC which is not possible at this moment. Everything other can be controlled through SIOC but ED stopped completing this part for an unknown reason. The graphical export of the UV-26´s digits is nice but not nice enough for a "feelable" homepit... So pleeeeease let this thing flow into some of the future patches!!! I´m really not alone with this "issue"...:pilotfly: Regards Terrorvogel

...if somtime the price sinks to human 15€ i´ll buy this nice app too... Regards Terrorvogel

With my Matrox Triplehead and GTX 580@6320x1050 it really makes no fun anymore. Very poor framerates and not really playable for me. With BS1 there was/is no problem with that high resolution. Same for A-10C too. I do really hope there will be a solution soon... Regards Terrorvogel

@StumpDK Check this Link out: http://www.splash-one-bandit.com/parts.html I bought many of this switches there and the prices and quality are really nice if you compare to other sellers... Regards Terrorvogel

Omg i didn´t knew that there will be new serial:doh: As i logged in into digitalcombatsimulator.com i have seen the "new" one and now it runs. Big Sorry guys and thank you for helping so fast! Can be closed... Regards Terrorvogel

I allready tried that before. The same thing -->question for serial Regards Terrorvogel