Dragan

Dangerzone Thank you very much for your help.E xcellent

Thank you very much, how can I find it?

Hello friends and colleagues, as the title says, I need quality radio chats for my flights, and that they are long, I am currently using the radio chats I downloaded from this DCS address and they are good https://www.digitalcombatsimulator.com/en/files/filter/user-is-DishDoggie/apply/ , but I am interested in downloading more, of course they are in Ogg format, any help in finding them is welcome

On the general volume of the radio transmission, as with the AN/ARC-186, there is a small round switch.I read the manual, but I didn't find any answer

Guys, I hope the topic is not out of date, I wonder if it is possible and how to amplify the ARC-210 radio?

Hello, I noticed a long time ago, and this continues through all previous versions of DCS, that buildings or warehouses are restored after destruction, as well as trees that burn after the fire disappears, the tree has leaves again and is completely restored, can this be avoided? And if it can't, could we get a solution to this unrealistic problem through further updates or future versions? Best regards...

What happens when you go into a dive towards the targets? Does the dashed line appear then? Is the crosswind quite strong?Are you switching to the CCIP bombing regime? I don't think you can adjust the HUD on the A-10

A-10 is an addictive plane, at least for me, I've been flying with it for so long, I'm still actually LOMAC, the peak has reached the current DCS, I wanted to try other powerful planes, but DCS's A-10 is in the first place

Now the connection is visible only after takeoff, I noticed it too,.Some planes, such as the F-4 Phantom, have no connection at all and cannot be seen from the A-10

AMD Ryzen 5 2600 Six-Core Processor 3.40 GHz / 16GB Ram / AMD Radeon RX 570 series I will send the track of the next task when I notice that it happens again Here is stuttering by day and day landing, to emphasize that my graphics in DCS are all at high resulution.This is a mission of over 2 hours dcs.log dcs.log.old debrief.log

Has anyone else noticed this anomaly during night landings on the runway at the moment when the lights on it are turned on, it manifests itself so that the DCS stammers or there is a crash, please everyone who notices to write it here

This procedure that I wrote is my standard procedure, and I have never had a problem, and I drop the GBU-12 bomb from different heights, but always above 10,000 feet. And it is definitely not a problem here, the most important thing that I noticed is that the SPI was not made, it it simply doesn't get the chance to drop the bomb, in short, the computer doesn't know what to do because it doesn't have all the data.

Simply do it, turn on the laser on the switch, then turn on the auto laser in DSMS, then determine how long the laser should fire, I type it for 12 to 15 seconds, choose CCRP, you have 2 ways, if it's the keyboard, it's on the letter M or DSMS profile, make SPI, hold weapon release for 10 seconds and the bomb goes off..Enjoy watching the explosion via TGP P.S. In your video I see that you didn't enter Laser Time at all, it's only 12-15 seconds, and it looks like you don't have SPI, this is mandatory

The answer to your question would be YES, all this is normal, I personally like to set quite strong wind very often, and in different directions, because it is realistic for me, I never fly without wind and my HUD is always off center, if you are guessing shoot with a crosshair cannon without a circle and the symbols overlap, go into a dive below 30 degrees and there will be no problem, there is no problem for shooting with a circle, fly, everything is normal and very challenging

Can we get real communication with allied planes in the air in the mission editor in the near future? When I say this, I mean the completely real thing of communicating with allied planes that are not from our group, for example: A-10 with F-16, etc. Independently from multiplayer flying for more players, I think it is not too big a problem to introduce it in DCS for independent missions... Thus, we would be able to independently coordinate attacks with other allied AI planes in a completely realistic way.I think this work option has been needed in the DCS world for years.So far, we can only hear them on the set frequency..

I followed all the instructions and in the end I started all the mentioned systems, I know where I made a mistake and I made a mistake because I separated them by adding and they were by no means in the same group like Grimes wrote,thank you very much

Thank you very much for the explanation, I have been doing it simply until now, for example, I set what is in the group and I did not pay attention to these settings,that's why these mentioned systems couldn't even engage me

I was asked for a track, I installed the Kub system, there is an AI F-16 in the air that literally attacks the Kub system with a cannon, the system does not react to it.Does anyone know what this is about, I repeat, everything from this topic title (doesn't) react,the radar is spinning.Kub set as default, 1 launcher 1 radar... Kub.trk

The task was a bit longer but I hope this helps, here is the Buk system.You will probably see that I set up 2 launchers and of course all the radars, the launchers didn't even try to fire a missile at us dcs.log I set everything you listed as the default, even they were on very flat ground, several times, also like the other 2 systems, they did not fire a single missile

When I install these systems, I always do it the way it is recommended and everything I have, for example: System Kub 1 launcher and all radars, the radar identifies me and I get a signal in the plane, but the launchers are the problem, they don't react, the same goes for Buk and S-300

Hello people, I am asking a question about the above mentioned systems in the mission editor, when I set up these systems they do not react at all when I come into their range, since I can fly with an A-10 plane and I can literally approach and use the Gau-8 cannon to destroy each of the mentioned systems, What am I not doing right in the setup of these systems when I am not being shot at? Are there additional settings needed? The other Tor /Tunguska/Osa systems react and fire when I am in their range and engagement

The mission was built complete and ready to run, but loading stopped and wouldn't start, I had to quit and exit via Lctrl /Alt/Delete

Problem loading the mission, I'm sending the log if it helps dcs.log-20240112-232310.zip

Thanks a lot

Hello guys, I recently installed the map of Syria, since it takes up a lot of space, I need to remove it, in my module manager I was not able to see that it exists, like there are airplane modules, how can I remove it easily?In the main installation I saw mods and terrain folders, can it be deleted by simply removing the folder?