Dos

Hello, I hope I am in the correct room. I moved over from DCS BIOS HUB to Flight Panel and since I continue to get socat error code socat [1641] E write (7, 0x0800070000, 84): Permission Denied. That is the error I get when I am in DCS while doing a start up, it will usuaully crash before I finish the start up. I basically got to reboot everything to clear this. Another error which happens before I load DCS and I launch multi port CMD is socat [1830] E open ("/dev/ttyS-1", 01002, 0666): Read only system. To clear this one I have to delete the program folder and reinstall add the port and it works until it crash with the above error. I tried to fix by changing my programs folder attributes but it will not change from read only. It will let me uncheck read but when I exist and open the properties again it changes back to read only. Not sure if that is the problem but I looked to find more post on this error but nothing. Can someone please help me clear these errors? Thank you, J

@hrnet940 did you get the fork version fixed? Thanks/J

Very sexy! The right side (the dials) is that one tablet with Helios and the two smaller dial from Tekcreations? The sunvisor makes a world of difference, great job.

Hello @Tanarg how did you make/get the enlosure for it all. It makes it look awesome. Thanks J

This has been sort brought up, check it out.

Did you guys get it to work? How many amps and sound cards did you need? Thank you

Let me edit this so MSally approves "just hinges off the F-18 UFC" and then OMG it transforms! Is that better?

Wait can't we just turn HUD BRT to off? Thinking about it may cause problems when binding the external HUD. Dos

NeoEngress Simulations | Cockpits | Ejection Seats | Simulator Electronics Good Luck!

Yes.

Landed to hard broke nose gear?

Hi Mark, I checked mine just now and seems you could use simappPro to electronically switch the ddi display id in the MFD Display tab. Do your display id match the location like you mentioned it does in the Device tab for [MFD1-L, MFD1-C, MFD1-R]. Both the DDI display id and MFD-1, MFD-2 , & MFD-3 match physical location on my displays. It does looks like you should be able to switch electronically using one or both of those tabs. J

From WW: Dear customer: when you buy our bundles or HOTAS or COMBOs, there will be a discount for you, for details, please refer to the tips, on the upright. Discount will be available if customer(s) purchase(s): 1.HOTAS/COMBO 2.One COMBO and assemble a HOTAS 3.Grip and base and assemble a HOTAS 4.One single item and a COMBO, then assemble a HOTAS. Discounted price will be automatically displayed on the payment page. Please note: if you have assembled a HOTAS, but bought one more grip or base, there will be no discount on the extra items. How to check your discount? Please refer to our FAQ. https://wwsimstore.com/view/help.html?nav=W3siaWQiOjIsInRpdGxlIjoiU2VydmljZSJ9LHsiaWQiOjYsInRpdGxlIjoiQnVzaW5lc3MifV0=&id=d3d0MTA1

Hello, I do not think you can. You can choose distance in mission editor, but can only change formation in flight. Unlike Falcon 4.0, in DCS you can not tell your winman to close up formation, not that I have seen. Dos

Hello, My export has the three simshaker files together -----SimShaker local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') dofile(SimShakerlfs.writedir()..[[Scripts\SimShaker-export-core\ExportCore.lua]]) dofile(lfs.writedir()..[[Scripts\SimShaker-export-core\ExportCore.lua]]) -----Streamdeck load the DCS ExportScript for DAC and Ikarus dofile(lfs.writedir()..[[Scripts\DCS-ExportScript\ExportScript.lua]]) -----WinWing local wwtlfs=require('lfs') dofile(wwtlfs.writedir()..'Scripts/wwt/wwtExport.lua') It may help to reorder it, another thing you can try is remove everything from the export.lua but the simshaker entries run DCS and check to see if it fixes the problem if it does it was the export.lua since conflicting in some mysterious way, but at least you know it works and may just need to re-arrange thing in the export. Hope it helps. Dos

Hello It is not the export. See if you can try the "windows key" plus "P" then pick the "PC screen only". You should have had to extend to use the MFD and by picking the PC screen only option it remove all the other monitors (DDI) and leave just your main PC one and everything should be displayed inside. Hope that works for you. Dos

@=Andre= it does help I do not need the ASIO as your software work with Wuzhi if i seletect it directly in the software and not through ASIO. I see now we do not need ASIO any longer to get stereo effect as of 2.33. Thank you for the reply.

@=Andre= Hello, I post this message earlier and see you logged on I did not direct it to you and did not want it to get buried, but could you help me with this? I am unable to get ASIO to say 6x it only says 1x. I have audio from the sound card going to an amp with 3 channels L/R and subwoofer. All three have a buttkicker attached to them. Everthing wwork if I do not use ASIO, but I am not get left-right effect seems alll three kickers rumble. Any help would be appriciated Thanks

I had same issue and think perhaps I did not go all the way down on the threads. I reseated and now it is solid.

Hello, I am unable to get ASIO to say 6x it only says 1x. I have audio from the sound card going to an amp with 3 channels L/R and subwoofer. All three have a buttkicker attached to them. Everthing wwork if I do not use ASIO, but I am not get left-right effect seems alll three kickers rumble. Any help would be appriciated Thanks

Oh try labeling it my export is below. I can't say for sure it helps but it does not hurt. You also have WW twice in your entry on top and bottom. Hope it helps. -----SimShaker local SimShakerlfs=require('lfs'); dofile(SimShakerlfs.writedir()..'Scripts/SimShaker.lua') dofile(SimShakerlfs.writedir()..[[Scripts\SimShaker-export-core\ExportCore.lua]]) dofile(lfs.writedir()..[[Scripts\SimShaker-export-core\ExportCore.lua]]) -----Streamdeck -- load the DCS ExportScript for DAC and Ikarus dofile(lfs.writedir()..[[Scripts\DCS-ExportScript\ExportScript.lua]]) -----WinWing local wwtlfs=require('lfs') dofile(wwtlfs.writedir()..'Scripts/wwt/wwtExport.lua')

Hello, Try in the settings (gear icon) for SimAppPro look for and check the box for "close the modification of Export.lua file (after ...." Dos

nice RIO and pit!

Hello, I bind all my lights on the MIP to the panel light switch and I bind the panel light switch to DCS. You can also bind all of the components to DCS just like the panel lights switch. Both these type bindings should let you adjust all lights off the one panel switch. If you run into issues it may be your export.lua too. One way to check that is to remove everything from your export.lua except the winwing lines and run the sim it to see if it works. If it does it may be the order of the stuff in the export.lua. Hope it works! Dos

Hello, I noticed mine does the same. With everything tight I could still turn the stick on the Z axis seperate of the base. Hope someone figure it out. Dos