Dos

Hello, After trying many combos with single or multi comm ports and the streamdeck I finally ejected : ) - I unplugged the streamdeck and considered selling it. It was very functional so stay with it but not hooked up. I did not file a report but can and will. Thanks for the reply. Kindly J

Jim, Although I do not have a solution I was wondering if any of this sound familiar to your problem, see link: For me it happens when I use Elgato Streamdeck and anything connected through BIOS. I will lose a board like the caution panel or AOA indicators and get Socat permission denied on the com port window. I am guessing you are using flightpanel as the original one is no longer supported and used multi com port? I hope it gets figured out I miss using the streamdeck. J

Hello, The same thing happened to me on diffirent mission and fighter. I take off carrier and put the hornet in auto let it fly over the way points. I then leave and controll the carrier, for example, the hornet suddenly turns to go back to way point 1 even thought I had just flown over it and yes yellow dashes to WP1 would be on the F10 map. This was a while back for me it was on a mission in Marianna Island. If I recall correctly I tried, taking off and put the hornet in auto and F10 then cycle time and l see it eat up the waypoint and yes they were gone after fly over, that worked fine. For me, I think it happened if I flew over a WP while in the hornet and then left it would start over to WP1. I did not think it is the mission itself. I am interested in what causes this. Hope someone figured it out.

Try stowing the camera first to box VVSLV which should make the camera slew to where the nose is pointed (stowed) and then you box WPDSG on waypoint six the camera should slew to it?

Hello as far as the options lua that file is created when you boot DCS. Then you close it and launch winwing followed by DCS. I guess winwing piggybacks on it after DCS creates it.

You use this and spread them Kindly, J

I usually go to this link Releases · SimShaker-for-Aviators/SimShaker-for-Aviators-Releases (github.com) which is tied to the software and yes it is still on 2.7.9.0. So the software will not trigger an update needed, I guess.

I felt the same way, but over time you will learn to que off what PawlaczGMD said. Until then their is a mod I used. Darker and Less Glossy Deck for the Supercarrier and Stennis (digitalcombatsimulator.com) Kindly, Jesus

Big Sock and shower cap, sure.

Ain't the saying - stay ahead of the aircraft

Could it be aligning through DCS?

@ZACHI I got the person for you! Her name is Trudi and she is on Etsy. tenshimadeShop - Etsy. I just ordered covers and she was awesome to work with. I included pic from her site and the idea of the MIP cover I order. Hope this helps. I highly recommend her. She will add any design and attach remove before flight banners. Kindly, J

I believe it is only when you look at the pilot from outside (F2). The pilot will put the visor down and up and you see it, take a look. Now that you mention it is it suppose to make a difference to our HUD view like tint the view some?

Yup I noticed that. The shot needs to be lined up. I brought the combined arms but it is not needed. Although some subs shoot TASM a I believe they are tracking since with combine arms I could use the fire at and then move it around onto targets.

Hello, Try changing the order of your export.lau. Try putting WW last as you mentioned that each works by itself, so it maybe when you add the other entry to export.lau and the order you have them in. That happened to me but with the lights. The solution was reordering my export.lau. I have WW last in my export.lua. Hope it helps, J

Oh I am sure your right.

Hello, Can someone tell what I am donig wrong in the mission I have attached (mod reqiured). Even better if someone could post a mission where the vanilla DCS sub shoots a torpedo that would be great. I would rather not use the mod. I can not get them to shoot torps. I searched and only found the mod and it could be done, but I mmust be doing something wrong. Thanks for the help. Kindly, J subs.miz

No fly zone CBR warfare!

Sounds like a solution!

Am I the only OCD one? That glass better shine more than my flight boots, heck even the tires better shine : ). Ok maybe too overboard but in 21 years all we ever did in the US Navy was clean, why would we want or even allow for a dirty cockpit... My vote: Allow for on and off as mentioned by schmiefel. Since we would be, in reality, looking past it. Thanks for supporting us back ED Team. Kindly, J

Hello, I do not think they mount directly on the bracket for the super taurus. As I recall mine pto and cp are stacked on same bracket and that fits between the bracket of the super T to be clamped on a table. Kindly, J

Hello does the hud pivot or is it seperate? Looks fantastic. Kindly, J

Hi Harley, You not interested in hinging the left side to allow you to get in and out or up and over is the plan? Look great don't forget to paint it. ; ) J

I just tried to set up the multiple-com-ports.cmd in run as admin and what it does is open briefly and disappears, serial works fine in admin, is that normal? UPDATE: I launched the multi com port and DCS with no winwing. tracker, stream deck, or logitech keypad. I did quick mission hot start marianna island. Let the jet run for over an hour and I had no issue with socat. I added winwing and tracker ir ran it for 30 minutes still no issue. Then I added my logitech keypad and did a few landing and take off then put the hornet in ap doing a circle for about 40 minutes. So that is about 2 hour and no errors. As soon as I launched stream deck socat error returned and one of my com port initially #8 crashed. To bring the panel back I need to close the multi com port CMD and power cycle the left annunciator or com8 and then relaunch multi com port CMD and it will work, even if I left stream deck on, but let me touch a button on stream deck and instantly one of my com port crash over again. So if I launch stream deck while DCS is running or if stream deck is running and I launch DCS and then I touch stream deck button the socat error appears. If anyone got an idea to fix this I am willing to try. Kindly J

Hi @maciekish, Thank you for taking the time to help. I cannot believe no one else is having an issue with socat. As far as rebooting I have to every time it errors in the game which is the permission denied error. The other error clears with the delete and reinstall programs folder from the Bios master folder. I have four COM 4,5,8,9 in use and you mentioned serial but I am using multi - can I launch that in - Run as Administrator? I will try that leave jet running see socat crashes. I did run the test and Com 9 was the only one that consistently never outputted anything. Once I hit enter it just sat there (see pic). The right side are the results of adminstrator privilage. Again thank you, J