Dos

I agree to a total of 10 and that they are not USB C just USB . On the back of the devices they seem to be USB C but the end on the pc side are regular USB, except 3 of the 10. If you look at this pic from the D1 manual, 1 cable is labeled USB to PC HDMI? See pic I circled what I am pointing out and the cable they have in pic is all USB not HDMI on pc side. Meaning we may need 3 additional HDMI port!?

Hello all, When the timer hit zero the website crashed and like an hour later I checked and it was available. So you were correct @markturner1960, looks like they had so many ready for delivery last night and then they ran out and now they are taking pre-orders. @FZG_Immel congrats you got one too! Time to get a USB card or hub now. Dos

Thank you @Flappie for the quick reply. I had to remove both CAM and MAM for it to show up. I got to go in another direction then for this trigger. Dos

Hello Team, I was trying to create a trigger with the condition that when my AGM-154C enters the zone it spawns another unit. The problem is mission editor (ME) does not list the AGM-154C version. In ME, I see the A and B versions of the AGM-154 but not the C. I went to the encyclopedia (in DCS : )) and it lists the C and B versions, but not the A. I did not find a post on this issue, so I thought I point it out for a fix perhaps in the future. I need that Charlie version added to ME plz or am I missing it? Dos

This video shows it working. Dos

Hello all, How about exporting the PLAT view to a second monitor can that be done, and how? Thanks, Dos

Hello all, So no current Tarawa class ship on DCS, like USS America? Cheers, Dos

@prestonflying Hopefully they will come to their senses. Thanks for making it happen! Cheers, Dos I just looked on the winwing website and the UFC DDI combos are beginning to sell Oct 8th!

Thanks for the tip @Tholozor. I have been dropping both at the same time at 250 as well and will change it up. I will add this @killerquagmire, I felt the same about the wrestling match then used ATC and found that if I hold the nose steady say on the edged of the runway initially you do have to fight the plane as it will want to pitch up and down dont let it and within seconds your ATC will obey and steady out. This will alleviate having to focus on throttle inputs though if you are cool with that. Just got to glide it in ; ) I will try the gears first now and then flaps under 200 and then ATC perhaps it won't bounce to much or at all due to less speed and engage ATC smoothly. Good day, Dos

Hi all, At night with NVG, I turn map off. Heck almost all lights need to be turned down with NVG. Map can not be dimmed enough so not to wash out view. HUD characters looks way better at night turned down to almost off WO/NVG. Making those adjustment mention above helps, but I am almost on Minsky level. Double tap mode. I do turn it on and off to check it for feet wet or dry, can't really see that in HSI or SA. cheers

Hello, I think one way to check is look at target data when you designate the target, if the Lat and Lon change it is working. You do have modes you could change with the sensor switch. Dos

Light syncing gave me issues one module (PTO) would turn off when I shut down the hornet but another would stay on. I deleted everything except the winwing line from the export.lua. file and began there and it worked. I added one by one the lines to the export.lua and in the end found that winwing, for me, worked only when it was the last line in that export.lua file. The order in which thnig are listed in the export.lua file matters with light sync. All my lights work on/off and sync with winwing last in export.lua. Hope it helps someone. Dos

Hello mine is the same and I believe it is because I have a deadzones in the tracker IR software , since it was to jumpy without no matter how still I remained. As soon as I turn my head towards the center of the TV the view go to center HUD and remains still. Dos

Hello, Nice pic but does not show AP. If you do not see a semi colom -> : next to the A of :ATTH then it is not activated. I read if you do not add a dead zone to the joystick when centered you wont be able to activate AP. Might want to try that. Hope that helps or you find a solution. Jesus

Self taught, great job!

Amazon.com: AC Infinity MULTIFAN S5, Quiet Dual 80mm USB Fan, UL-Certified for Receiver DVR Playstation Xbox Computer Cabinet Cooling : Electronics I got these for the amp. I place them on top and they help extracting the heat

I would add get a few fans. both the amp and the buttkicker get hot. My buttkicker gets hot to the touch and has cut off. I got fans on the amp but need to figure out the buttkicker.

Thank you both for the reply. @Smashy can you share one custom icon?

Hello, How do you get text and raw data on the same button? I would like to label the raw data of my Left RPM and Right RPM and I am using the DCS interface momentary button/display(text). thanks for the help J

Nevermind figured it out. Delete the module from DCS, check!

@nerves where are the F18 modules located what is the path to the file(s)? I saw the mention above but was not clear and hoping you would be a bit more detailed if not to much trouble.

What did you do to fix it?

Hello all, @Sinistar you get it working? Dos

The prices for winwing stuff just went up considerably.

Hell, I think you got to push on it after you move the switch. J