-
Posts
976 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Moxica
-
..because I have made some of my own, but it is like buying my own birthday present, and acting surprised when I open it. I find no good way to use filter in downloads section. How do I go by that?
-
I flew a downloaded ah64 mission yesterday. It had the worst fps in my Oculus quest 2. After a while I could not take it, so I paused and "Ctrl-alt-del" and opened task manager. Good time to go downstairs and refill my coffe. Coming back I un-paused and re-entered the mission, and it was totally fine. Wut? I have recently moved the game folder from a spinning disk (E:) to a hefty 2TB NVMe SSD disk (F:) (Old disk not necessarily giving bad fps) It used to be 80% plus activity to that E drive before I moved it. BUT; Upon exiting the game yesterday, I noticed real heavy traffic to that old E drive. Usage fading as the game was ending. That made me suspiscious-ish. What is accessing that drive? -Because I have experienced that bad FPS suddenly gets better if I active pause for a while and wait until it settles. It is like the game need more loading time after I have started the mission. -Non Steam version Any of you gentlemen have any thoughts/experiences/theories/wisewords/hunches regarding this?
-
I use oculus quest 2 controller to push power levers. After the former update, there is no detent, and I struggle to find the correct position manually. (Giving me a stressful flight with high/low rpm and overspeed) It is not like that in stable version. Is there anything I can do to remedy this?
-
Thx a 1000 times, gabuzomeu!
-
Where do you get the option to enter "3"? I'm using the am manual frequency dial, (left cockpit) and the choices there are: 00, 25, 50 and 75.
-
..because ,3 is not an option; have to choose between 00, 25, 75 etc.
-
I am trying to check settings for "Virtual reality" i Nvidia control panel. Browsing to DCS.EXE, and in the control panel it is (re)named to: "Digital combat simulator: Black shark", and have no support for vr settings. I do not even own the Black shark module. What is going on?
-
HOTAS buttons stop working mid flight
Moxica replied to yinlad's topic in Controller & Assignment Bugs
I lost functions on some buttons on my Warthog Hotas yesterday. I do have a no-name-Xbox-ish PC-controller that goes into sleep mode. (Via bluetooth USB dongle) Reading this thread, I'm sure it is the cause. -
From what I understand, the torque information (in hud and mfd) is based on current, real time load on the rotors. Is there a way to see the state of the collective in percentage or smth?
-
I was chasing that idea for some time. I did make it work on my former throttle, but on a rotary: Meh.. I recently got that same hotas, and assigned vr zoom to a button in stead on that throttle. It works very well for MFD's.
-
I need to connect some dots on a basic level.
Moxica replied to Moxica's topic in DCS: A-10C II Tank Killer
I got it! Sat up a training mission with 5 BTR 80s. "Active pause" until I got them, using your recipies. Also: Now, I have a china hat. Right there: "China hat forward long,TMS Forward Short" -
I need to connect some dots on a basic level.
Moxica replied to Moxica's topic in DCS: A-10C II Tank Killer
Thank you gents. It might be that the China hat is involved in slaving. I heavily suspect there is a Warthog hotas waiting for me when I get home today. (My girlfriend is spoiling me on my birthday) It has a China hat afaik. Combined with your inputs (pun intended) It would make this a great afternoon for me. -
I need to connect some dots on a basic level.
Moxica replied to Moxica's topic in DCS: A-10C II Tank Killer
"You can create a SPI with it and slave the mavs to that point" Eureka! Thank you so much! -
What is the targeting pod for? I find target, zoom in, and center it in pod. I can change a few modes with the dms. (But there is no lock.) I still have to slew the (now blurry) and realtively wide angled MAV camera and find the same target to make it lock so I can fire a Maverick on it. Some info miss me on every lesson I try to take, be it youtube, or "training" missions.
-
It went into rocking chair mode. I've had that happen to me on every flight since last update occasions. Even with George by the stick. George should get some lullaby tune in his repertoire. I could go zzzz.
-
My Viper trims itself randomly and erratic
Moxica replied to Moxica's topic in Controller Questions and Bugs
I found it now. I have fooled my self; Roll trim wheel was still assigned to that rotary on my throttle. I could have sweared... Thank you so much gentlemen for your engagement. -
My Viper trims itself randomly and erratic
Moxica replied to Moxica's topic in Controller Questions and Bugs
I'm hesitant to make that conclusion, as I see no signs in other modules.. Anyhoo, I'm pretty darn certain there is a Thrustmaster Hotas Warthog coming my way on my birthday later this month. -
My Viper trims itself randomly and erratic
Moxica replied to Moxica's topic in Controller Questions and Bugs
I can see the spontaneous trim change in the "Right ctrl-enter" window-thing.. The other day, it behaved as if it was in some kind of "latch mode"; It returned to zero by it self after I've moved it. -
My Viper trims itself randomly and erratic
Moxica replied to Moxica's topic in Controller Questions and Bugs
Autopilot off. I have USB joystick into throttle, and throttle into PC. I have some kind of bluetooth x-box controller with a dongle that is made for PC. (Not really an xbox controller) Plus a set of CH products (yoke not connected) USB pedals. Today I suspect a rotary on the throttle. Because yesterday I assigned one of those two as zoom for the TGP. The other one has been assigned to trim. (Did not work well, so I un-bound it) I must check as I get home from work -
Without any reason, it trims to the right in plain flight. I have a hat bound to trim, and that one does not drift or need calibration. The hat never sends any signal in A10, F18 or the AH64 without me moving it. But in The F16 I have to correct trim to center regularly without having fired any wing mounted ordonnance. I don't know what is triggering this. Anyone?
-
Yesterday, I killed my first target with a Maverick. Today I killed my first target(s) with laser guided GBU10 -There has been a lot of confusion and frustrations. Now I'm having a beer. DCS is so cool!
- 1 reply
-
- 9
-
-
Let me know how it is user related: I'm slowing George down in steps. Last one from 40 to 0 knots. With zero winds he continues forward at ca. 20 knots. I turn 90º four times. He is moving forward in all directions. Does not happen in stable.
-
Was hoping to avoid using open beta again. AH 64D is an unflyable yoyo. Even with winds at 0, George cannot keep a steady hover. Not even close. Minimum forward speed @ ca. 20 knots, when I "punch in" zero; In all headings/directions! Take offs that work well in stable versions, ends in exaggerated rolls Winds still at zero. All other maps are fine (in stable version) Marianas runs fine. Falklands turned into jerk-o-rama with only two stationary enemy units on the ground. Surprisingly, because there are no visible hi end textures or objects. F16 and F18 at higher altitudes were problem free. (Did not take off from ground) #Oculus Quest 2