Chinga

why not use a link cable? im rock steady at 13.9 to 14 latency. anything wireless is gonna introduce latency/lag

Make sure that one of your radios is monitoring Guard.

Same here. After the quails are shot down..told to go tac on aux and chainsaw on pri...then nothing. No more communication.

Thanks for the help rob10

So i am confused when on my way to waypoint 6, Anvil gives me an offset of 075,10 what does this exactly mean? i assume its an offset from waypoint 6 but but there is no elevation data so im guessing bearing and distance? if so, i cannot enter the bearing it keeps giving me an error on the ufc.

@Badger633 All is working now. Cleaned out my saved games/mods folder and now campaign works correctly. Thanks.

Hi @Badger633 Here is the track. Yes i do have super carrier module. Ropl.trk

Just purchased this campaign. When i go to start the first mission after loading im looking at the mission editor. when i press fly..im not in my cockpit but i am spectating above the carrier. After maybe 5 seconds im in my hornet crashing into the sea and mission fails. Tried dcs repair...deleting and reinstalling campaign. no luck

I suggest Barthek's excellant texture mod for Caucasus which includes snowless winter option.

Just a guess here. The mission loads you with sparrows by default. Change loadout to 120's if you want to take them out in tws.

aquisition switch forward long i think

Yes!! All of a sudden...maybe last open beta patch. I roll left or right its like i have a huge deadzone assigned which i dont. Move stick....nothing. Then all of a sudden it rolls hard. Pitch doesnt behave this way...just roll. I find it hard to fly straight and level now cause of the "delay". im rocking back and forth. Virpil warbrd base and alpha grip if it matters. This is the only module its happening in.

Do you have your Hotas controls synched in options? Seems to me your power levers are not in the fly position when you spawn. Either unsync your controls or make sure your power levers are in in fly position before mission start.

I have had no issues whatsoever with trackir 5 and the 516.59 driver. windows 11 pro and rtx 3080ti.

I recently had to get a new motherboard and did a windows reset.When i fire up dcs i get this: Failed to get authorization data. Error code is: 500 No saved authorization found. How do i get my modules reactivated? Edit: They all started working by themselves lol

Ive tried turning off ssaa and the shimmering is horrible. Ill try the mfaa. Thanks for the tip.

Here's my system. i7 10700k @ 5.1 all cores. 32 gig gskill @3200. Asus Tuf Gaming OC 3080ti overclocked 100mhz core...400 mhz memory. Corsair 850 Psu. While playing DCS temp of cpu in the 50's and gpu 50's to mid 60's. I have frames locked at 60. Graphic settings at high except msaa at 2 and ssa at 1.5. All the sliders for terrain and stuff are in the middle. Instant action mission hot start ah64d in caucasus im at 60 frames but occasionally drop to like 56. Im pretty bummed i just spent 1100.00 on a video card and still cant get a solid 60 frames at all times. Is this normal? What kind of frames are others getting with a similiar setup?

i have had that as well since release. i enabled the option to sync controls and now i no longer have that problem. just make sure your collective is down before hitting start.

I just yesterday upgraded my graphics card from a 2070 to a 3080ti. Rest of system is i7-10700k @ 5.0 (all cores), 32 gig ram @ 3200,dcs on samsung ssd,corsair 850 watt ps. On the caucasus instant action start on runway..im getting high 70's to low 80's frame rate. In other missions with other modules im well in the 100's. Is it just the ah64 thats graphics intense? I thought id be seeing way higher frames with this card. With the 2070 i was getting in the 50's or are my expectations of a 1100.00 graphics card too high. What concerns me also is that i wanna dabble in vr. i have an occulus quest 2. If i cant get a steady 90 frames in non vr..i wont be able to maintain 45 in vr correct?

You have to flip up all the squelch toggles above the volume knob

im guessing not. im sure a mod will move it sooner or later.

Same here. As soon as DCS starts it disappears. Quit DCS and its back. I read a post from awhile ago that said 2.7 broke this...that its there but rendering behind DCS. Not sure if this is true or not. Obviously VFGiPJP has it working.

@Super Grover I tried posting this in general area but got no responses. If i go directly into direct head tracking everything is great. Can control crosshairs with precision. If i tell jester to qwp first ,then go into direct head track to refine position...crosshair becomes uncontrollable. I`ve attached two small tracks. One is immediate direct head control and the other is after telling jester to qwp. Hopefully you can figure out what my problem is. head_norm.trk head_wonky.trk

So i have this problem. Not sure if this is intended behavior or not. If i directly go to direct head tracking in the menu..everything is fine. I can slew the cursor with my head nice and slow with good control. If i use the menu to to go to qwp mode...then into direct head tracking..the cursor will shoot of wildly as soon as i move my head.Usually always down and to the right no matter which way i move my head. Can we not fine tune the lantirn with our heads after jester puts it on a waypoint?

when you first open powershell just type in cmd. not cmd command. i probably worded that wrong