Arink429

Buenas. He realizado un vídeo explicativo sobre la secuencia de puesta en marcha del A-10C; qué instrumentos y en qué orden observarlos durante la puesta en marcha, basado en el manual real del avión. Espero que os guste. Un saludo. *Fe de Erratas*: me he dado cuenta de que en el minuto 12:30 digo una cosa mal respecto a la presión de aceite: en caso de puesta en marcha con motores o entorno frío sería lo contrario, la presión sería superior, no inferior. Antonio.

Hi all. According the TO-1A-10C-1 manual (page 5-12 change 9), the maximum ramp, take-off and landing weight is 46,000 lb. The 51.000 lb limit can be attained in-flight only (AAR is the only way for reaching that, I guess...). That differs from the TO-1A-10A, where taxi at 51,000 is allowed, with gentle turns and braking above 46,000. Did anyone notice that? Thanks and season's greetings! Antonio.

According the flight manual T.O. 1T-L39C-1, TAKE UP is correct. Other marks are: NOM, CR SPEED, IDLE and STOP.

Hi. For magnetic declination correction in Nevada map, the KM-8 correction pointer must be moved to 0 for reliable heading indications (!! Another issue I guess). This instrument is placed on rear cockpit right console. When flying in single player mode I can move to rear cockpit for a while for this task and return to front cockpit for continue preparing the flight. I have both CW and CCW functions mapped on the joystick, but I noted that they only work from the rear seat. In multiplayer mode I’m not able to perform this task because the correction knob does not move from the front cockpit. Is there an effective way to moving this knob from the front cockpit? Thank you. Antonio.

Hi. On mission editor, I mark "dismount IFR hood" and launch the mission in multiplayer mode. The front pilot can't see the ifr hood indeed, but, when another player choose my rear seat, he can see the hood installed in place. Same for external view. Anyone else experienced this? Thanks. Antonio.

In most cases, the IFEI time does not match the DDI’s time (min,secs).

Muchas gracias! Antonio.

So concerning mobo, is the ASUS Z370 ROG MAXIMUS X HERO (WiFi version) a good choice? Thanks. Antonio.

Hi all. Wich one of this two cpu's would you recommend me for DCS? Also have planned to use DCS and another sim with functional cockpit (7 screens + 3 for visuals). I have to choose between i9 7900X or i7 7740X (rest of components in my signature below). For playing in both, screen and VR modes. I know that X cpu's are not the better option at this moment for playing DCS, but this is my hardware at present moment. Thank you. Antonio.

Hi. In my cockpit I use a seat with ejection handle as real does, and it's no practical pulling three times for the ejection. Triple action is fantastic for avoid mistakes pushing a joystick button or keyboard, but not for a dedicated handle. Please, add an option for ejection with single action. Thank you! Antonio.

Just for info, I followed the instructions from this post: https://forums.eagle.ru/showthread.php?t=203614 and for the moment my problem is fixed. The textures and maps take very short time to load and crashes and stuttering no longer exist. Antonio.

Thanks Sham03. My computer works perfectly now. No crashes, no stuttering. Thanks a lot. Antonio.

Yes, completely deleted.

Yes, I also find that problems after a fresh/first install. Antonio.

I' ve noticed that the first time I run the game after computer start, all seems to be fine. Closing the game and launching it again, I get vey low loading speed, and the game runs under continuous micro-stuttering on video and audio. The "black canopy" I posted before is actually a result of large amount of time for charging textures, also instruments and panels are affected. A simple indication to notice this before flying is launching the Mission Editor, then wait for the background map to load. As said before, the first time I run DCSW after starting the computer, the map starts to load quickly just after few initial seconds. The subsequent times I start the game, it takes a lot of more time to do this. For the same reasons, the first time after starting computer, I can play perfectly without stuttering on image, but for the rest I even get eventually a crash. Before posting this message I've reinstalled the game and tried to fix with all the methods suggested on others threads, without success. Finally I reinstalled Windows from the beggining, and the only improvement I've noticed is that what I say here: only runs ok the first time after starting or rebooting computer. I attach my last crash log. Thanks for the help. Antonio. dcs.log-20180331-141210.zip

Hi. On 2.5 and Caucasus map, flying the A-10C straight ahead into a waypoint (centered on nose of the aircraft, no crosswind), it does not show on TAD at twelve o'clock, the point is shown on the left side, it seems that the TAD map looks turned around 10 degrees anticlockwise. Thank you. Antonio.

Hi. I get poor graphics performance after update 4 and several crashes. All test flying A-10C and Caucasus. Clean re-install and ok. Installed A-10C module and ok. Installed Simple Radio 1.4.8.0 and Tackview170 and ok. Installed C101 module and performance degraded (low FPS) but not crash. Installed AV8B, P-51, Comb Arms, AJS-37, F-5E, FC3 and performance still degraded, textures load takes too much time, A-10C canopy turns black and several crashes when exit and/or restarting game. Thanks. Antonio. dcs.log-20180321-045330.zip

My PC doesn't work this game on XP, dont know why. Under Win7 it's a real shot! Congratulations for the most real simulation game i've never knew. Today, just few minuts ago i've received the HOTAS WARTHOG. Really the number one game pad i've see (Im a commercial pilot and i'm thinking about to pass me to the warthog world) Nice job, people!!!