ZBoT

Sorry I should have mentioned that. Yes I have run the calibration many times. It does not fix this issue.

Has anyone had any issues with buttons 29 & 30 on the Warthog throttle after installing this slew upgrade? When I pull my throttles back from IDLE to OFF (just over the hump but not all the way) both buttons 29 and 30 come on. When I pull them back all the way button 30 turns off but 29 stays on. It's like the right throttle (that the slew is attached to) is slightly ahead of the left throttle. This is causing me issues in DCS as if I pull both throttles all the way to OFF, the right one goes back to idle.

Hi all, My Thrustmaster Warthog throttle is having a weird issue where one of the IDLE/OFF buttons is not remaining on when pulled all the way back. Working with Thrustmaster they now have created an RMA and I'm awaiting more details. I asked them about the process and turnaround time but they did not respond. Curious if anyone has sent anything into Thrustmaster to get repaired recently. If so what was the turnaround time? Did they repair your device or just send you a new or refurbished one? Wondering how long I will be without my throttle which means I cannot fly. Thanks!!

Thanks all! I tested this more last night and that was indeed the issue. CS was hidden behind BB perfectly. I had OFFSET the RWR so it would see both apparently. Thanks again for the help!

Could be. I wasn't able to select between BB or CS in TOO page though. Was just curious what was going on. Thanks for the feedback.

When deploying a AGM-88C HARM against an SA-10 I'm able to see both BIG BIRD (BB) and CLAM SHELL (CS) in RWR and SP mode of HARM page. When using the TOO page of HARM, CLAM SHELL does not show up but you can clearly see it on the RWR (or if I switch back to SP mode). Is this by design or a bug? See screenshot. Thanks!

Yes it was multiplayer. That makes sense. I must have missed the notification when I entered the plane. Thanks for the info!!

Hi all, Question, what triggers Tacview to stop recording? Reason I ask is I flew a mission last night with my squad. At the end I landed on the carrier but stayed in the mission a while to watch others land behind me. Tacview stopped the recording not long after I landed and cut off the end of the mission. I had clicked over to Discord after landing to watch the live stream of them landing. Does Tacview stop recording if the DCS screen is no longer "active"? Would just like to figure this out so it doesn't happen again. Thanks! P.S. - Not sure if it matters but I'm using the paid Tacview Advanced version

Paid version of VIACOM Pro and VoiceAttack. Still learning both and trying to get it all working right. One small issue I'm having is every time I enter a mission with VIACOM running, the Comms/Radio option menu is open and I have to hit F12 to close it. Not a big deal but annoying. If I don't have VIACOM running and start the same mission, the radio menu is not open at start. Anyone seen this or know how to fix it? Thanks!!

Just an update on this. I created a test mission with all three tankers I listed above. I was able to communicate successfully to each of them without VIACOM changing my radio frequency. I'm thinking there might have been something odd going on with my squad's mission that I was flying in. Still though I don't see why VIACOM would ever change the frequency if I have Instant Select unchecked and easy comms off. Anyways hopefully this was just a fluke. I'll report back if it happens again. Thanks for the help though!! Really like VIACOM!

Thanks for this info, I really like this idea. Question though, do you have any problems with VIACOM listening when you're talking over SRS and "recognizing" unwanted AI commands?

Same. I've found getting VIACOM/SRS/Discord all working together is difficult. I'm still working on a perfect solution myself but not there yet.

I just started using VIACOM with SRS and found it easier to have separate bindings for PTT for VIACOM and SRS. Just couldn't get them to work the way I wanted with the same PTT binding.

I have 'Instant Select' unchecked. I think I have tried it both ways with and without saying "Texaco" but I can try again later. PTT is set to NORM/MULTI. Here are my settings:

Using the full paid version of VA and VAICOM Pro. In the mission there are multiple tankers: Texaco1-1 (KC-135MRPS) 317.600 Texaco2-1 (KC-135MRPS) 317.650 Texaco3-1 (KC-135MRPS) 317.700 Flying the F/A18-C and I have easy comms off in DCS and 'Select Tunes Radio' unchecked in VIACOM Pro. When I tune radio to one of the tankers (ie: 317.650) and say "Texaco, approaching for refuel" it switches my radio to 317.600. I thought with easy comms off and 'Select Tunes Radio' VIACOM Pro should never change my radio frequency. What am I doing wrong here? This is driving me mad. Thanks for any help!!

Hi, Thanks ED for the ability to move and resize the kneeboard. Now I don't have to edit .lua files. Is there a way to save the position/size of the kneeboard though? I have to move/resize every time I start a new mission. Thanks!

This is EXACTLY what I was looking for, THANK YOU!! I'm enjoying checking out your project too. Nice work! I wish I would have found your site earlier before I had to learn about editing the .lua joystick files to work with ON-OFF switches. I like how you maintain the joystick edits in a separate file. A lot of good information you posted that I plan to read through. Thanks again!!

Thanks Deadman! I do have a 3D printer but if I can't get the results I want this is a good backup source.

Thanks Rapti!! I'll check this out.

Hi Andre, I'm interested in purchasing your Jetpad. Are you currently shipping to the USA? If so do you know what the shipping time is for that? I would like to purchase this as a Christmas gift and I'm curious how early I need to order for it to arrive by December 25th. Thanks!!

Thanks @Zulu_Uniform !!

I get the same error. "Value cannot be null. Parameter name: path." Then hangs.

That is really slick! Thanks for posting the plate STEP. Do you have the STEP or STL for the Buddy Fox holder as well?

Hi, I'm working on building a F/A-18C instrument lighting panel for myself. I'm having trouble finding 3D files (CAD/STL) for the lighting knobs: Does anyone know where I can find those? Thanks!!

You should refrain from aggressive comments to someone when you obviously don't know them or their abilities. @LeCuvier is one of the DCS joystick control guru's who knows this stuff EXTREMELY well. He has helped MANY people on this forum fix some VERY complex issues and doesn't deserve comments like that.