overalien

I uninstalled the store as per the video but the behavior is unchanged. However, everything works fine after an unplug / reconnect on all usb controllers that need to be bundled by the target profile. I use a similar solution as mentioned above by having all controllers connected to one hub and switching that hub off and back on. This still seems to be the most reliable workaround. Sent from my iPhone using Tapatalk

I see that you are on FM instead of AM on the radio. same happens to me. the select command tunes correctly but also switches to FM (by default?). asking Jester to change "Radio Mode AM" after tuning the frequency or recipient fixes it and everything works. drove me mad in the beginning until i figured that out... not sure if this is a DCS interface issue or a VAICOM feature. @Hollywood: your view?

Hi Home Fries Now that you mention this, I have been following the issue that madmatt has with the double tap on H1. On my f14 profile the s3 H1L or H1R seat switch never worked and I struggled around a lot until I tried that combo with double tap instead. That works like a charm every time. I put it down to a typo in the manual and just went on using it like that. Now that I read this I can't help wondering if there might be an issue in the script causing this behaviour with certain options set. For me it's not a problem since I've used the profile like that without any issues. However perhaps it's worth looking into? Sent from my iPhone using Tapatalk

Mine too. Sent from my iPhone using Tapatalk

Crash to Desktop with Memory Leak confirmed in log - Single Player SP Mission over Caucasus in F-14B. Log attached. Windows shows DCS excessive memory usage. dcs.log.txt

Extended functionality for AIRIO planned? Hi Hollywood, Firstly congratulations on a great extension. When properly installed and set up, it works flawlessly and is really great for immersion. I was wondering whether the basic functions available today are planned (or possible) to be expanded in future to cover the full scope of what is offered by the wheel. One topic I am really missing now is the ability to instruct Jester to use F10-Map marked Waypoints for INS setup on the fly or during cold start. This is particularly important in multiplayer missions (e.g. DDCS or GAW) where the waypoints are not pre-defined in the mission and change dynamically. As an alternative, simple Long-Lat input instructions for Jester using voice could also be workable. Some feedback on your ideas and plans would be welcome :)

CTD today which yielded some info in the logs that might help... Jester sound and memory allocation. Log attached. dcs.log.txt

F-14B Tomctd? (10th April Update CTD ) Hello Heatblur Devs, Perhaps this helps: I have a 100% repeatable CTD flying the single mission called 'Eclipse' from DCS user files. The crash always happens somewhere around waypoint 2 with the master arm set to on and all weapons set up for an air to ground assault just after take off. The mission requires radio silence so there is no communication on route. The trigger for the crash appearsto simply be the time into the mission since there is no specific action that precedes the crash other than approaching waypoint 2 or waypoint 3. I tried a suggested workaround that involves turning off TacView recording in the special options screen. This made a difference by significantly delaying the onset of the crash. The CTD still came but only one I reached the carrier. Windows logs show application errors for dcs.exe and ntdll.dll. Nothing else in the dcs log. I hope this helps you to reproduce the crash. If it helps, I reproduced this crash with a vanilla install, no mods other than exporting displays and no export script running either. Sent from my iPhone using Tapatalk

It made a difference in my one mission that crashes 100% of the time at waipoint 2. The crash came much later just before landing. So there seems to be a connection but it's indirect.... Good workaround though to reduce crash likelihood...? Sent from my iPhone using Tapatalk

Jester gets the Datalink Frequency wrong. On a few occasions I noticed that when asking Jester to set "Link Host <unit name>" he tunes the DL to a frequency other than the one in the mission for that unit (e.g. AWACS or Carrier)(reference info is the kneeboard). sometimes he is off by only 0.2 MHz but he is still off. Is this a VAICOM ARIO issue or is it an F-14 module bug?

.... and no helpful info in the log file. Windows reports application errors for dcs.exe and ntdll.dll. Sent from my iPhone using Tapatalk

Still crashing for me as well. Certain missions and certain situations. Sent from my iPhone using Tapatalk

Hey guys. In two of the modded missions I found that I had to use the mission editor to add the INS alignment "stored" tick in the box to the player aircraft before I could fly and navigate the mission properly. Otherwise the steer points are wrong when flying the mission. For a hot start in the mission, INS should be aligned or is this intentionally left to the player to do before take off? Sent from my iPhone using Tapatalk

For me it was like that before the VAICOM AIRIO plug in. Jester has a lot of trouble locking targets in bvr sometimes. Sent from my iPhone using Tapatalk

I have found that unplugging all USB Assets in your HOTAS Group for Target (Throttle, Stick, Pedals, MFDs) and plugging them in exactly the same ports also sorts out this problem after a restart or log-off log-on. (I use a Hub with a switch to achieve this easily - switch off . switch on).

F-14B Profile: Discrete State Weapons Select now "locked in" Hi Home Fries, This is a great evolution of the profile. Thanks for that! Since the update I notice that the setting for discrete weapons select vs. sequential select seems to be ignored in this latest version. The profile stays on discrete selection regardless of whether the choice is set for "0" or "1". Can you reproduce this on your side?

I got all the normal exports working fine except for one niggly issue: the night mode red tinted VDI exports as a black screen. In day mode it exports with all green graphics without problems. I could not find anything in the lua files hinting at another export and could not find any obvious tweakable code either. Has anyone figured this out yet? Sent from my iPhone using Tapatalk

I have the same problem with the errors at mission end. Also after the first F-14 Mission success, I get spawned into an FA-18 (instead of an F-14) in the second mission. Is that intended?

Hi Hollywood, AIRIO module is a treat. Thanks for that man!!! Three observations (two already mentioned here): - Stennis TACAN tune command is missing in the keywords - no INS alignment commands (yet?) - Radio tuning not possible with easy comms off (yet?) Sent from my iPhone using Tapatalk

I have had an occasional issue like that where ssa runs on after dcs close with high cpu usage. I cannot confirm that ssa caused a DCS crash however. Sent from my iPhone using Tapatalk

Hi Captain Orso, I am not entirely sure how to do that. must I uninstall KneeBoard builder to perform that test? DCS does not give me any beacon info at the moment, even when i did not activate KneeBoard Builder's dynamic beacons..

i can confirm that this advice works 100%. thanks for that. I have found that for some missions that the dynamic briefing pages are sometimes blank (and transparent) but at other times filled with the correct info as expected. this only with the F-14 module. All other modules' auto mission brief kneeboards work properly.

Great job Home Fries! Thanks for getting it out so quickly!! Sent from my iPhone using Tapatalk

Nope. Just normal bvr with jester active Sent from my iPhone using Tapatalk

I can confirm similar. Three successive CtD while using TWS in the same mission. No error log entries but Windows reports and application error with DCS referring to a DCS world dll. Sent from my iPhone using Tapatalk