humptydumpty

yep like a kite in bad weather

Oh you mean the animation ? that monstrous shake ?

I had to reduce the curves to 25 for roll else horrible wobble of the wings during approach / landing. Pitch is all 0. I am really not sure why even with an extended stick I need curves but anyway. Please redo the video. But what I can tell ya is that the left wing will dance and then the right wing and will slip on the ring wing and then the nose will oscillate but it's easy to get her back.

Is you throttle auto jumping ? and after a couple G turns she goes down ? I am on OB 1.5.5

Ok. Will check it later 2nite.

I haven't checked your track file :) I tried it. Not that I understand much but the left goes very stringy and then the right but I can still recover even at 5000 AGL

Ok what I noticed was the left wing going wobbly and then the right , was around 5000 AGL speed was about 780 gave a 90 AOB gave back pressure to give a G turn

I think she wobbles a lot

Still at home so just tried it. but i am not still able get the sustained turn, let me try again.

Yes the pitch not needing any curves I have noticed. But my problem is set any curves for the roll then either she is hypersensitive above 700 km/h or she hypersensitive on approach and landing. I am still trying to find the roll curve balance. Surely can try with 45 for roll

Well will it later again. I am not sure what curves should I be setting for Pitch / Roll as i have a 2 feet extended stick. If I don't set the curves maybe I will pull too much on that turn.

Tied the sustained turn at around 12000 ft AGL , what I noticed is she spins on the right wing and I don't think this was there b4. But I could not maintain the sustained turn because my joystick roll is very sensitive.

Confirmed the roll stops if the ammo is filled just tried it on Aerobatics Online Server , not yet tested the sustained right turn will do so later.

I am on that server but they don't allow weapons hence I fly her in the default server config. Don't know if they do allow just loading them. Will check it up though.

Will try it later tonight. I do have one irritating thing is that she keeps rolling right.

Hmm I am not sure if i have noticed the CAOA at that speed around 3000m with a sustained turn @6g's , are you in a clean config ?. I do have a lot of wobbling during approach but that could be due to my stick extension. But i will try it tonight on the VA Server. About the FM i think she flies better ?

Will the server be up again ? haven't seen it since yesterday

The electrician who checked the voltage on the Logitech attack 3 was wrong. I borrowed a multimeter from sum1 and checked , at the connector level to the board it's around 5v but when I check the wire heads it's showing less than 2v around 1.8v now this is funny because there is no resistance on that wire. I am so confused.

The Honeywell SS495A1 are available here in India but they only give a big amount of them. So I went to another shop and he gave allegro don't know what model I think the 1203 and he said this should work so let's see. Else I will have to buy the Honeywell .

Thanks, though from AliExpress it takes around 40 days for the delivery here, but in the meantime I will also look for other sources of this Sensor in the local market.

Well he used a multimeter to test it. pi will get it checked again. Thanks for the recommended hall sensors but these are nowhere available in India but I will try some more shops. I guess I would need to step up the voltage to get 5v when the logitech voltage is 3.5v damn i don't know how will i do it. don't have much knowledge about electronics but I will try.

Oh wow thanks sobek. So I need one without latching ? Any recommendations ? They are very cheap here will go looking for them this week

Well you do need some good magnets. Two sensors cost me only a dollar i.e. 60 INR :) Buying a good stick is like 100 or more in USD can't afford that.

Hi, I am using a Logitech attack 3 and the potentiometers keep conking out hence i went and bought MH-182 Magnetic hall sensors. Connected them according to the pin out but when I use the neodymium magnets it does nothing. I got the voltage checked of the logitech attack 3 pins by an electrician and it is 12V and the MH-182 has 3v to 24v input voltage. I followed all guides from here and others on the Internet and i have done the same thing. but when changing the magnet polarity there is no response. BTW these are magnets from old HDD and very strong, the other black color magnets I have are way too powerful and if I put them on any metal surface it won't just come off will need a screwdriver to get it off the surface with some strength. Appreciate every1's thoughts and info. i can't keep purchasing new sticks everytime and the others are way too expensive for me. Rgds.

It is twitchy even in the Mig21 , this is strange as it shud not be the case , I had to give 5 curves to Pitch and 10 for roll. Anyone have knowledge about using the Hall Sensors on the joystick ? I got hall sensors but they are not working with Magnets instead if I hold it then I can move the axis