Shortcut

Just did the update what happened to all of the instant action missions? There's lest than half left.

That's the reason I'm going to wait to purchase a VR. If I'm going to get into VR I would like to be ready for hand tracking. My 1080Ti is only 9 months old don't want to go out and purchase a 2080Ti would rather wait for the 3080Ti which must be right around the corner (wink). Hoping the 1080Ti can run the Comos at 40 - 45 frame and with little to no SDE waiting to see the specs may work out may not.

I think I'm going to wait and see what happens with the HTC Vive Cosmos. I'm very interested in the hand tracking they are talking about. If it would work in DC S and X Plane wouldn't it be nice if you could push buttons and flip switches without a controller.

I'm looking into VR for the first time was very interested in the Oculus Rift S but not so much now. I think I'm going to wait for the HP Reverb or the new HTC Vive Cosmos, which look interesting according to there sight but they still don't have any specs listed. I would rather get something I will enjoy.

My Warthog Joystick died. I found a burn mark in the bottom PC board then contacted Thrustmaster and they wanted over $80.00 for a replacement board. I found this on E-Bay "Repair Service: Thrustmaster Warthog Stick Main PCB (Bricked Warthog Fix)" $25.00 Plus $12.81 return shipping. I figured I'd give him a try and sent him the board for repair. I received the board back in 12 days it works great and saved over $35.00. I'm just passing this info on in case anyone need a repair.

OK

My Warthog Joystick died. I found a burn mark in the bottom PC board then contacted Thrustmaster and they wanted over $80.00 for a replacement board. I found this on E-Bay "Repair Service: Thrustmaster Warthog Stick Main PCB (Bricked Warthog Fix)" $25.00 Plus $12.81 return shipping. I figured I'd give him a try and sent him the board for repair. I received the board back in 12 days it works great and saved over $35.00. I'm just passing this info on in case anyone need a repair. :thumbup:

This sounds interesting. I'm thinking of getting into VR but have no idea what I will need I think my system can run the Pimax 5K Plus will I need the controllers to operate the buttons in the cockpit? Any help would be appreciated.

I don't think so, but I have not tried. I just down loaded it yesterday and haven't played with it that much. So far I'm liking it and figured I would pass the info on I would like to know what others think. The developer is thinking of doing one for the A-10C but I have no idea when.

Search Google Play Store for DCS HORNET AMPCD & UFC Or try this link. When the builder e-mailed me the links the app was free now its $3.49. https://play.google.com/store/apps/details?id=com.deviceworks.dcshornetdevice

He now has the UFC working. You must start DCS prior to loading the DCS Device Sever. The MFCD Is not working at this time. I'm using it on my Mirosoft Surface Pro while running the NOX Android Emulator. Give it a try. I've made a new app that control or your hornet's AMPCD & UFC both at the same time. You can find the demo version of the app for android below link. https://play.google.com/store/apps/details?id=com.deviceworks.dcshornetdevicedemo You can download server file from below link. https://www.dropbox.com/s/s0qeuhk552n0d63/DCS%20Device%20Server%202.03.zip?dl=0 At the first screen, press ampcd display will popup the connection window. From there, input your ip address and port (as you can see from the server, mostly 9100) then hit 'Enter'

He now has the UFC working. You must start DCS prior to loading the DCS Device Sever. The MFCD Is not working at this time. I'm using it on my Mirosoft Surface Pro while running the NOX Android Emulator. Give it a try. I've made a new app that control or your hornet's AMPCD & UFC both at the same time. You can find the demo version of the app for android below link. https://play.google.com/store/apps/details?id=com.deviceworks.dcshornetdevicedemo You can download server file from below link. https://www.dropbox.com/s/s0qeuhk552n0d63/DCS%20Device%20Server%202.03.zip?dl=0 At the first screen, press ampcd display will popup the connection window. From there, input your ip address and port (as you can see from the server, mostly 9100) then hit 'Enter'

I Received a E-Mail from the developer to day. This will be a nice addition to the F-18. I've checked the routine that possibly make any FPS lock but couldn't find anything. Actually, I think a few frame drop can caused by this script but it cannot lock FPS. Currently, my system cannot generate over than 60 fps so I will contact other person for this problem. (testers I mean) And TCP direct connection method is implemented to the newest AMPCD & UFC application. Unfortunately, the UFC application implementation is delayed because of new app release schedule.

It's fixed. The only thing I could do wad to delete DCS World Beta and do a complete new install and everything is working. It takes a lot of time to download everything. I wish I could have figured out what had happend but its back up and running.

I found a copy DCS on another drive that worked all my Modules are there copied it to the non working DCS folder tried it and it worked with all Modules there. I did the up date again and the modules are gone except for the Caucasus, Nevada the SU-25T and the TP-51D. The Module Manager showing all Modules active but they are not loading. ???????

The last log in the saved game folder is 1/23/19 is there one any where else? DCS works fine. My paid modules are not loading after today's update I can fly the the 2 that are there P-51D or the SU-25T with no problem. I’m missing these paid for Modules they are not loading into DCS WWll Pack, A-10C My F-18, UH-1H Huey, Persian Gulf and Flaming Cliffs3. They are not showing in DCS. I found a copy DCS on another drive that worked all my Modules are there copied it to the non working DCS folder tried it and it worked with all Modules there. I did the up date again and the modules are gone except for the Caucasus, Nevada the SU-25T and the TP-51D. The Module Manager showing all Modules active but they are not loading. ??????? I guest I'll fly the Non updated version of DCS on the other drive until I can figure this one out.

Just did the latest update did the repair deleted fxo and metashaders2 files started DCS and all I have is the Caucasus, Nevada the SU-25T and the TP-51D. Checked the Module Manager and it says everything is installed. I’m missing WWll Pack, A-10C My F-18, UH-1H Huey, Persian Gulf and Flaming Cliffs3. Can anybody help? :(:(

Just did the latest update did the repair deleted fxo and metashaders2 files started DCS and all I have is the Caucasus, Nevada the SU-25T and the TP-51D. Check the Module Manager and it says everything is installed. I’m missing WWll Pack, A-10C My F-18, UH-1H Huey, Persian Gulf and Flaming Cliff3. Can anybody help? :(:(

This App was causing DCS to lock my FPS the first time at 28 FPS. After I reinstall DCS it locked DCS at FPS at 50 FPS. This originally happened after I did a DCS update so I was thinking the update caused the problem. This Android app has a additional program that's called DCS Device Server this program adds 2 files to the Saved Games Folder under Scripts. Theirs a folder called DEVICEWORKS and a LUNA file called Export. One of these is causing the FPS locking. I deleted both files and I'm back over 100 FPS @ 7680 X 1440 (3 monitors). I never did get the App to connect to my phone of tablet but if the developer can get it to work it will be a nice addition to DCS your be able to put the UFC on a tablet or your phone. He also said he's going to do a App for the A-10C. I e-mailed the developer about the problems I found, hope he can fix it.

I found what caused the original locking of my FPS. I was trying to use a Android app with DCS called the Hornet UFC Is has a additional program that's called DCS Device Server this program adds 2 files to the Saved Games Folder under Scripts. They a folder called DEVICEWORKS and a LUNA file called Export. I deleted both files and I'm back over 100 FPS @ 7680 X 1440 (3 monitors). If the developer can get it to work it will be a nice addition to DCS your be able to put the UFC on a tablet or your phone. He also going to do one for the A-10C.

When flying at dust I have the Gamma set 1.7 to 1.8 if as it gets darker I can no longer see the knobs and switches in the aircraft. When it turns dark even if the moon is out all I can see is the runway lights the runway is black. When this happens I must stop the Simm and set the Gamma up to 2.2 - 2.4, just which there was a easier way.

It would be nice if we could get Deferred Shading adjustment on the keyboard. If we could use 2 unused keys to raise or lower the setting as we fly into different lighting conditions instead of pausing the flight to make a change. I don't know if it's possible but it would be nice what do you think? My Mistake should have labeled Gamma setting/slider

It's fixed only way was to copy mods to new DCS Beta down. After that copied DCS that folder to correct M2 drive then delet old DCS beta. But at lease its working.

Uninstalled anything that said Nvidia installed 391.35 no difference uninstalled 391.35 reinstalled 417.71 no difference. Redid the DCS Repair no change Next: I downloaded a new copy of DCS Beta last night to a different drive and FPS are back up and running good. Any idea which files could cause the problem I realty don't want to have to re-download everything.

Installed latest drivers last night driver version 417.71 maybe I'll try an older version Tried driver 391.35 still FPS read out says no lower than 26 FPS and Max is 28 FPS no matter what or where I fly. Maybe a problem with FPS counter?