The_Nephilim

Hi thnx guys the GPU should be here tomorrow looking forward to getting it. I have a reverb G2 Specs are in my signature

Hey Everybody, I had ordered a 2080ti as my 1080ti has a missing capacitor so I just got a good deal on the 2080ti so I went with that for a bit.. I was just wondering what kind of performance I could expect? I do pretty good with the 1080ti so my guess the 2080ti should be a bit better in VR FPS wise hopefully..

well you could use DCS Update utility.. I am pretty sure there is some command line you could use for the shortcut but not sure what it is..

No, Sorry for the confusion but try this: Goto Win 10 Start menu, Settings (the little gear Icon), the settings window pops up go to Mixed Reality, then Startup and desktop, once inthere look for Input Switching which will probally be on Auto Switch it to manual.. IF you need further details let me know..

try in windows turn too manual input instead of Auto under mixed reality, startup..

have a Merry Christmas..

well yes it works like I said without the eye tracking.. from what I read on the github it is a bit better then the Open XR toolkit..

sounds like you have reprojection (ASW) running or turned on..

ummm Quadview works in the regular G2 even without eyetracking.. running at 60 hz is better if your PC is not able to run a 90fps and you dont see the flicker @60hz..

try to run a clean, repair of DCS and delete FXO and Metashaders folders..

Thank you for the responce but I am more or less reporting an issue to ED. my FPS dropped a bit and I have been using the same settings since forever.. the last to patches are where it seemed to have went south. if you look at my DCS.Log you would see I am using the MT.exe.. I am not looking for suggestions persay. I am pretty low with my settings as it is and lowering them mostly besides maybe MSAA does mostly nothing.. just filing a report here is all. I can regain the FPS but it dropped near 5-10FPS and I am now getting below my 60FPS/HZ Rate which is bad.. I set my G2 too 60hz as 90hz was just way to high and was worse then it is now.. but since 2 patches ago the performance fell of yet again..

Hey All, I don't have the highest performing system but it is good enough, but with the recent patch 2.9.1.48111 I been experiencing lower FPS and slight stutter when looking out the sides of the cockpit. I ran the Marianas, Apache Test range mission and was getting about 35 FPS. since the last 2 patches is when it started getting bad. With these settings and most maps I was able to hold 60FPS. Marianas is the worst right now but with the reolution I run and using 60Hz setting in my VR Headset which is a Reverb G2 I was able to get the FPS at 60 and it was smooth as butter.. Looking to get a different GPU but not much of a bump as it is only a 2080ti but I just wanted to let ED aware it seems to be getting worse these last 2 patches.. Looking at the thread for reporting VR Bugs it stated to show the following which I have assembled. [code] What we need: dxdiag ( enter dxdiag into the search box on the windows taskbar. Select dxdiag from the results. In the tool, select Save All Information for an easily shared format.) dcs.log Short as possible track replay where you experience the issue, attach if under size limit or link via a cloud link. Screenshot of DCS settings page and VR setting page. Screenshot of your VR device settings Screenshot of your NVIDIA / AMD control panel settings. [/code] dcs.log FPS Test.trk dcs.log

Thank you Taz yes ED Needs to incorporate these into the game hopefully having Taz blessing.. I had a question most of those files in the Textures folder are zipped, would the game load quicker if I had them all unzipped? I know it would take up more space on the Drive that is not my concern.. I may test it if it is even possible.. Well I unzipped all those texture files and it seems to take longer to load the mission after I hit fly?? Not sure if it helped or got worse..

well in your log file it stated you had this happen before the CTD: 2023-11-12 02:41:29.222 INFO EDCORE (11952): # C0000005 ACCESS_VIOLATION at 00007ff9ae12dd15 00:00000000. Do you run any mods and have you disabled the hot plug usb? you have alot of different errors in the log like corrupt damage models and such and a few dx11backend errors as well. maybe GPU related. did you try running DDU to uninstall the current GPU drivers and reinstall a new set?

I would say system is unstable, have you tried running memtest or OCCT CPU, GPU Stability stress tests?

which video device do you use for playing DCS? if VR Perhaps you have motion reprojection running?

Do you have any winwing gear?

well, I think you are on to something I seen this video here the original video is private but this helped massivly for me.. for VR set the FPS Limit in the graphics.lua. I set mine 5fps lower then my lowest seemed to have smoothed things massivly.. Edit: I noticed when I capped my FPS the world outside the cockpit seemed to have smoothed out but inside the cockpit when looking around in the pit seems a little stuttery.. so I guess it is a mixed bag, would you rather cap your FPS and have the inside cockpit views look stuttery or you can run full out without capping and the outside world looks stuttery.. IDK, I think I liked it full out.. so not sure if this is a total solution but it could help others with really bad stutters.. TheONLY time it is very fluid is when I am set at my VR Headsets Hz rate and with my gear 60Hz/FPS is about the best I can do for now.. so that is the only time it is super smooth for me.. if I dip a couple FPS below 60 it gets choppy/stutters.. I am waiting on a 2080ti which should help me keep 60Hz/FPS real easy..

Well like my title says it is things to try, you would have to try but I seen all these things help some users. it is not a guarantee if you do these things it will fix your issue but the more common things I have seen over the years.. there are other things one could try and I think YMMV..

Soundslike you have aPC stability issue. it should not take 30+ minutes to enter a MP server.. and yes it is a simulation which is more demanding then a game..

Yes I see now, I just thought it could mean they were core affinity only on 1 core or something.. I looked in my log file and I had 16 - 1's for my 16 cores.. Then I would sumize in this instance it could just be a PC not up to par with what 2.9 can produce.. yes he said it worked in 2.8 but this is not 2.8.. I seen a handfuly playing on the CPU and all claim stutters.. so I am thinking a case of underpowerd CPU in this instance.

2023-10-26 17:28:31.394 INFO EDCORE (Main): system affinity mask: 1111 2023-10-26 17:28:31.394 INFO EDCORE (Main): process affinity mask: 1111 I have noticed this is most users logs I have looked at that have this stuttering issue, are you setting coreaffinity with a program like Lasso or regedit?? I don't see that in my log files and have no stutters or very minimal..

Hey I am not trying to get into an argument just asking a simple question. well it most likely is a 2.9 issue IDK but like I was saying if it was it does not seem to be global.. I am only seeking answers to why some users have issues why others do not.. But most times users post an issue with no data and expect an answer.. it would help if some users get their <profanity> together and post a good error report instead of just craping on the new updates.. Simple thing is you do not need to use Beta if you dont want the issues.. I currently have never experienced issues like most seem to have an I have lesser gear.. so I too am curious as to why I never seemed to have an issue why others do and with better gear.. it is a mystery to me and would love to solve it. that made me make my post about some common issues that have solved others issues.. I do not come here to argue and whatnot only to seek answers in this ever evolving mystery.. and to tell you the truth most users it ends up being something simple most times..

Well if that is the case then would'nt everybody suffer from stutters??

I looked on the forums and found an older post with the message you had and it turned out to be some scripts he was running?? Are you using any scripts? Also I am not sure it is a core issue I just thought I remembered a post that mentioned problems with more then 18 cores I really don't remeber the particulars.. I would if nobody else has made a post here about that. So do put in a ticked and just mention you have the sutter fest and I think you can attatch a log file too.. I am sure they should be able to at least help to some degree or narrow down what the issue is and get it fixed..