71st_Mastiff

MT/VR PiMax/Crystal vr the short range missiles wiggles in its pylon in FOV 1st person view, when active/selected. F2 view is normal. clip https://youtube.com/clip/UgkxZRrARWtSq9CVWFd77DgCR6aWqRZHmgdd?si=XYUhUF0Du_3rdH2_

FOV is close, and Far, the middle is none. MT/VR PiMax Crystal.

Thanks, I was looking for the whole name, Flaming Cliffs 3; not FC3. Good looking out.

there is no Su25a under the list of specials tab. only the Su25T is there. there is also no special setting under the tab for flaming cliffs.

Why is YouTube copy right strike claims through the roof on environmental sounds? I cant make videos any more because of You Tube and DCS World claiming copy right strikes on environmental sounds. and cockpit clicking. ridicules.

VR-Pimax Crystal MT/VR AI isn't acting right in Damage physics also. here is the SU25A fling straight and level. Single player trasck; su25.zip AI damage track; Desktopdmai.rar While flying in Instant mission, caucuses, I get hit by Mi24 and go into side spin as intended for this type of damage, but in F2 view half the vertical stab upper half is showing, the lower half connected to the fuselage is missing. damage visual issue here. Screen shots from system print screen no longer working in DCS World since September 2023 update. I have to alt-tab out and use the system paste into the paint. will not save in the screenshot folder.

I’m on the i9-14900k, MSI mpg wifi ddr4 64 gb, MSI venturas 3x 4070ti, just upgraded from a asus ddr4 wifi which was the 3rd motherboard failure. I really don see a difference as I run everything on ultra and high, looks the same to me.

your mission crashes to desktop and freezes' my system. I fixed it by opening it up in Editor and re-saved it.

yes Im having this happen with the TDC also not on axis. but on a throttle hat and it's frustrating when this happens.

I got the new update for NVIDIA today and set my setting in NVIDIA and much better FPS, and better visuals.

Ok, the DMT Camera on front nose, the TDC movement sometimes reverses the movement instead of left right up down the DMT moves reversed axis. On the keybinding. I’ll post a track, happens to me on the instant bombing mission.

ok I figured it out, when you accidently change the right MFD to something else and SOI back and have messed up the IRMV boxing causes the reverse TDC on the right MFD to DMT, and which in turns cause the Left MFD to reverse the left and right movements.

ok, for some reason the AGM65F IIR mavs will not lock a ZSU-Shilka? the training missions works fine, but the A10A canned instant mission I changed to AVV8 and saved separate mission for practice with the AV8B, the shilka will not show up in the Irmva? here's the mission https://www.mediafire.com/file/cfp0nyajfab5dij/AV8BNA-CAS+-+Caucasus+-+CAS.miz/file , as ED doesnt allow for file attachments any longer? 126.2kb my word; they seem to not able to have their own file save system? I mean look a typical track file is at least 1mb.

I have it correctly mapped but the left will make the cross hairs go right and right makes the crosshairs go left? waas working fine until I turned on DLAA. in graphics settings. I'll check it off and see if that's the culprit.

ok from high about 5kft. it misses but at 1kft. it hits dead on. so not sure why it would miss from higher alt?

https://www.mediafire.com/file/70fhey3m7y8lk3r/sidearmekeepsmissing.zip/file The Sidearm missing the active radar on the shilka by 50m. also the shilka has no heat sig, or flir sig. sorry put it on the wrong thread.

wow really cheap with the save trks size you guys.. AV8B sidearms missing the shilka. also the shilka has no flir. or heat sig. https://www.mediafire.com/file/70fhey3m7y8lk3r/sidearmekeepsmissing.zip/file

can not get the TDC to slew for the portion of this training, moving way point with TDC. ok figured it out, you need to be in INS mode which it doesnt explain this. never mind I had turned on the special TDC action on [boxed] in the Special tab section of settings.

well I don't have a TDC on stick, I have to use a throttle 5-way. This is confusing as hell. So in special tab for av8b tdc, uncheck the auto press. ok its the default special tab settings for the AV8B TDC auto mode that causes issues. ah ok finally figured it out works; another issue is the AGM65's do not work in the canned River crossing mission, I can not get any edited AGM65's to work. and not having a laser on the TPOD is a pain also! 4 years and counting is the AV-8b ever going to get fleshed out I bought it used? "pre-ordered and still no working"?

Can not seem to find a stabilator? What is it how can I find it and is it a cockpit viewable apparatus? it ask you in this training mision to work it. I can't even find it.

I'm also getting no radio detected errors. then thrown back to the main menu.

seems to make 2 input folders?

this caused my plane to disappear.

running MT\Bin VR Crystal PiMax; Tracks not saving correctly. A10A A0A not working properly, I came in for landing and my nose went sky high. I was properly configured for landing and as soon as I touched down my nose shot straight up. tail skid on ground. was saved on track but it didnt save correctly.

the dot shader only displayed in left eye not in right eye.